1 / 3
RatRig 3030 Spool Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This is a mount for a standard 1KG spool onto a 3030 extrusion, or RatRig V-Core printer. This is so you can mount to the front or the back without interfering with the extruder assembly.
You need:
2 40mm M5 bolts
2 M5 nuts to embed into the “Spool Arm” just pause print and insert at the right layer.
1 M5 30mm bolt for the bottom
5 M6x12mm bolts
5 M6 T-Nuts
The Spool Pad is derived from the RatRig files and is their geometry. It requires two lengths of PTFE to complete.