1 / 2
Umbilical Cord Mount for 3030 Aluminium Profiles — image 1
1 / 2

Umbilical Cord Mount for 3030 Aluminium Profiles

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A low-profile mount for an umbilical cord.

Rating
0 / 5
Likes
2
Downloads
5
Makes
0
Views
70
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial — Share Alike

Designed for my own printer, I needed a low-profile umbilical mount since the rear fan duct may overlap the rear profile during movement.

the holes are M5 screw holes to be used with M5 T-nuts, i use two M5x14mm screws

the hole for the supporting wire is 1.5mm in diameter and uses a 3x3x4.2mm heat insert to hold in place, could also be super glued if you dont have this particular heat insert

i used a M3x6mm screw to hold the wire in place

.sldprt included to remix or to increase heat insert hole size

Tags