1 / 4
Toolholder for 3030 Profile
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Easy installable Toolholder
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 20
- Makes
- 0
- Views
- 72
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Model
This is a toolholder for the Z-beam of the Prusa Mini, but can be used on any 3030 Profile.
Works great for me.
Printing instructions
This is a small part, so make sure your bed is clean.
The part is optimised for the following print settings:
- Nozzle: 0.4 mm
- Layer height: 0.2 mm
- Perimeters: 2
- Infill 25% 3D Honeycomb
Installation
Simply push the toolholder vertically into the profile, then twist it clockwise by 90 degrees.
For deinstallation turn it anti-clockwise.
Happy printing!