Cable Section Tester – Metric mm² (Including Insulation) | Testeur de Section de Câble – mm² (avec gaine)
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.26 – €1.54 net (excluding VAT)
For file: Cable_Section_Tester_mm2_0.2mm_PETG_MK3S_1h40m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.40 excluding VAT (range midpoint).
- Weight reported by the author
- 13 g
- Print time reported by the author
- 1.66 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Gauge for metric wires (0.5–35 mm²) with insulation. Accurate, compact, and easy to 3D print.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 72
- Makes
- 0
- Views
- 195
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Description – English
This 3D printed cable section tester lets you quickly identify the cross-sectional area of electrical wires in metric units (mm²), including the outer insulation.
Designed for electricians, makers, and DIYers who need a quick and accurate tool on the go.
🔧 Features:
Covers sizes from 0.5 mm² to 35 mm²
Hole diameters include standard PVC insulation thickness and +0.3 mm tolerance
Accurate fit for most rigid and flexible insulated cables
Engraved labels for each hole: section + diameter
Compact and easy to carry on-site or in a toolbox
🖨 Print settings:
Print flat on bed
No supports
0.2 mm layer height recommended
PLA or PETG
Published by Nemateq
Free for personal – enjoy and share!
💬 Feedback and remixes welcome.
-----------------------------------------------------------------------------------------------------------
Description – Français
Ce testeur de section de câble imprimé en 3D permet d’identifier rapidement les câbles électriques en mm², avec la gaine isolante.
Pensé pour les électriciens, makers et bricoleurs qui souhaitent un outil simple, rapide et fiable.
🔧 Caractéristiques :
Sections couvertes : 0,5 mm² à 35 mm²
Diamètres ajustés pour la gaine PVC standard + tolérance de 0,3 mm
Convient aux câbles souples ou rigides isolés
Gravure de la section et du diamètre à côté de chaque trou
Format compact, idéal pour la caisse à outils
🖨 Paramètres d'impression :
Impression à plat
Sans support
Hauteur de couche : 0,2 mm
Matériaux recommandés : PLA, PETG
Créé par Nemateq
Licence libre pour usage personnel. N'hésitez pas à partager !