Counting matching models…
The holder is for smartphones with width = 7.3 mm and thickness = 9 mm, such as the Huawei P30 Pro. The bracket can be attached to standard connectors. The variants differ in the position of the connection surfaces. Since the Brodit…
In my opinion the original bracket is too thin and I didn't feel comfortable with it. So I opened it in Fusion and made it thicker. The Orbitool 2 toolhead board still fits, only the “outside” is edited. I used these settings and printed…
Compatible with enclosure as it acts as both camera holder and panel holder. To mount it, I used an M5X20 screw with an attached nut to make it like an M5X18.
recogedor de cable. No necesita soportes. wire clip wall. Free suports.
Wireless charging stand of iphone 13 (Anker). Stand is suitable for 6 mm diameter anker wireless charge
About I am sharing with you my project of another guy ring for www.DX-WIRE.de 10m heavy-duty 2013 mast. There are various *.3mf files available for diameters as measured on the mast I got from dx-wire, I hope they are consistent among the…
Ce support permet de placer un RUT 240 et le célèbre 4G Wireless Routeur sur un tube et de le monter/démonter rapidement. Pour la mâchoire, prévoir 2 boulons M6x50 avec écrous, faire une pause pendant l'impression de vis.3mf pour insérer…
This protects the wires from the Z motors on a ratrig v-core as they enter the electrical compartment. These wires run on the bottom of the 3030 extrusion at the bottom of the machine and can easily snag on something while moving the…
Bender's bigger, badder brother is here! Meet Flexo, the most flexible Meshtastic powered node "case kit" available… and its FREE to print! Check out the intro video HERE and the teardown video HERE . ***ASSEMBLY VIDEO NOW LIVE CLICK…
A mount for the cartographer probe on the switchwire/enderwire. It's a remix of the x carriage and the belt grippers to provide clearance for the probe and wires. Mount requires two more heatset inserts into the bottom of the carriage and…
Wireless Charger Stand. Galaxy PETG, 20% infill. Enjoy.
Wall holder for Jabra Evolve2 75 Wireless Charger
This wall mount is designed to accommodate the Samsung S23 Ultra with a phone case, but it also fits a range of other devices, such as the Samsung S10 (as shown in the third image). The mount allows for both horizontal and vertical…
Holder for Bomb Busters game tokens This holder replaces the one included in the game's box. It allows you to properly align the "wire" tokens and, more importantly, to easily position the hint tokens in front. Once printed, the five…
Them : An AWG 22-24 wire wrapping tool will cost $29.95. Me : U MAD BRO? Best printed with 0.1mm layers. Feel free to remix - Add a longer handle or turn it into a hex bit. Scale it to fit different wire sizes.
This model allows you to organize your cables with 10x3mm magnets instead of screwing into your walls. Insert the magnet into the base and run the cables as you normally would. I also included the F3D file so you can change the size to…
A parametric solder/wire dispenser. Module spool_roll generates the roller spools and module holder generates the holder base. Relies on five (5) variables, modified in OpenSCAD file. no_spools Total Number Of Spools spool_width Spool…
Envious of Scott Yu-Jan's fantastic iPhone charging station, I designed my own charging dock, based on his idea, for the Xiaomi Mi 11 Ultra from scratch. Even though this phone might not be widely used anymore, I still wanted to share my…
Stackable. Holds 5 spools of wire. New version has entire front end recessed for easier stacking in front. 10cm Ruler on front. Confirmed wire spools that fit: https://www.amazon.com/gp/product/B077HRKYB1…
This is a small, 80mm diameter, 35 mm deep spool that I use for antenna wire, but I'm sure has many applications. If your printer bridges well, you can print it without support. The interior pocket uses a bridging trick to support the…
2026-May-20: I added a 2 wire, 3 wire and 4 wire comb object. 2026-Apr-23: I added an additional style (B version) of the center loom. It's designed for wire routing OVER the rear of the valve covers. This new style does not need the…
I wanted to bring new life into a Outdoor Christmas Wreath I had. So I created this clip to allow for the replacement of dumb lights that it came with to be powered by WLED.
The multimedia system on my motorcycle (a 2022 Honda NT1100) supports CarPlay or Android Auto, so I purchased an inexpensive module from AliExpress with this functionality. Since the module cannot withstand harsh weather conditions, I…
Added a tight fit snap connector to this for the multiboard.
NOTE: I have not had a chance to try this yet. My TFT35 is currently on the way to me. If you print this before I have a chance, please leave a make with a comment telling me how well it works! Mount for a TFT35 SPI touchscreen for…
This spool organizer is fully customizable to meet all of your wire holding needs! It introduces a mounting solution, which lets you organize spools of different sizes and makes into the same system. It is also expandable, so you can…
iPhone 11 wireless charger stand. Portrait or landscape. Basic stand mounts a uGreen wireless charger of ~96mm diameter This re-mix includes an adapter wedge that enables mounting a generic Amazon wireless charger of 56,0mm diameter /…
Created to connect to a corner cubical framework to hide wiring.
This model features a wireframe Rhombic Dodecahedron, designed in CAD and refined through an iterative process to form a Level 3 Sierpiński Octahedron fractal structure. It includes a seamlessly attached base and prints without requiring…
I double-sided taped it to the top panel and used the wire organizer to run USB cord. Mount Uses one M3x30mm bolt with M3 Nut
Recommended print settings: Material: PLA or PETG Layer Height: 0.2 mm or less Infill % : 15+ Supports: No Print Orientation: Default as modeled Brim: Optional Add a zip tie to both sides, after passing the PSU wiring through the hole:…
The original model looked great when the other half saw it, and wanted some for the closet. After quickly realizing that our builder selection had only a single top support rod instead of 2, I closed off one in the slicer to test. Close…
I lost the tape that protects the motor wires, so I've designed this simple model to be glued into place
DN40 Standby Dock – MagSafe, Apple Watch & Extra Wired Charging Slot Upgrade your nightstand or desk with the DN40 Standby Dock ! This 3D-printed dock is designed for iPhone Standby Mode , MagSafe charging, and Apple Watch, plus it…
You need to print: 2x of the arms laying flat. 2x of the rollers on one of the flat sides. 4x of the plugs with the clip touching the build plate. You may need some double-sided tape on the inside of the rollers and arms, maybe I'll make…
I really like that you can see if the mic is connected and muted or not on the USB receiver, but the blinking when not connected is very annoying. This simple sleeve can be pushed over to cover it and pulled up to view it again.…
A Gridfinity holder made for "JOKARI Super 4 Plus" wire stripper / automatic insulation stripper with minimal footprint of 1x1. It probably also fits the Knipex one (12 62 180). Other holders I found used at least a footprint of 1x3. This…
remix of the previous version closed off the cable channel more and added an ECAS option + tried making it editable again for the connecting hexagon refer to the original
This model features a wireframe rhombic dodecahedron, designed in CAD and refined through an iterative process to form a Sierpiński Octahedron fractal structure. It includes a seamlessly attached base and prints without requiring any…
12-48V 4wire PWM Fan Temperature Speed Controller Board Case. 1X4L FAN-1248 CONF V2-E Uses four M3x16 Socket Head Screws and four M3 nuts. Activation levers for “-, +, OK” buttons. Check for fit of case front connector holes as PCB…
A parametric model to keep your phone safe on round wireless Qi charging pods. This is done for 94 mm diameter charger and a Google Pixel 8 phone. I have my phone in a cover, but should fit without just fine. To adapt use freecad and…
Part for repairing Asus ROG Delta headphones. In the stock version, the headphones have a plastic wire terminal that does not limit bends and the wire eventually fails. With this model I was able to repair my headphones. There are 2…
Slip these jigs onto the 3mm stainless steel wire and slide it into the holes where the wire enters the wooden balustrade upright then paint the upright without getting paint on the wire. Printed with minimal infill in PLA (using the…
Guide for the X axis servo wire. This keeps it away for the tubing and screw.
this was done in tinkerCad and my skill level is not great, if anyone wants the TinkerCad link, let me know and I will make it available.
Based on the simple design slot.it had sold on Shapeways that is no longer available. Modified for easier printing on filament printers. Hexagons are the bestagons! Print as is in any material, and discard the little triangular support…
The model is a holder for a wireless charger for the iPhone XS. Thanks to it, my children can place their phones down be
A lid to print with the original model base, removes a box shaped face on the inside of the lid. Also positions the logo object for easier printing, either change colour by object for AMS/CFS, or print the whole object as one colour.
Needed a way to mount the 60mm electronics cooling fan on the switchwire or add a second one Middle skirt modeled to eliminate mounting points for the Mini12864 Bodies on holes can be used to add infill pattern or multicolor to the skirts…
I needed A new jig for my claptons as my old one was slowing down, i figured id try out better bearings than the skateboard ones. The bearing size is r188.(The small fidget spinner ones) Also has a 23mm indent that fits a generic 4" c…
The elements allow you to attach guy lines to a light antenna mast. The ability to rotate the mast has been retained. The model is adapted to a foldable "flag" mast with a diameter of 51 mm. I printed with Pet G, 25% infill. Elementy…
Hello everybody, I have designed a small and useful mount for my holex wire stripper. This design needs no supports (if printed in the orientation of the model) and has a very short print duration of under 30 minutes. You dont need much…
I recently needed a simple way to manage some over-long ribbon cables. This clip does the job for me. It could easily be scaled in the slicer for some additional sizes. If it is needed I can easily add extra slots or change sizes in the…
Bought a three tiered basket rack from Costco but it didn't come with anything to line the bottom of the baskets. After some rotting apples dripped all over everything under them I whipped up some liners. Printed in PLA, 5% infill nothing…
This is a set of five wire holders with a wedge shape at the end. I wanted a way to hold a wire on the side of my house under an overhang, but I did not want to drill holes, so I added a wedge to the wire holder to push into a seem…
I promised to cad this up ages ago and as soon as I actually started rebuilding my enderwire I actually did it. Inspired by RockAndRoll for the 2.4, you can tip an open or enclosed Enderwire on its side and and it will be stable. Yes my…
SawLink Universal QuickMount offers the same remote-trigger pole-mounted chainsaw setup as ToughMount , but with a twist: all fasteners are 3D printable and designed for hand disassembly . No tools needed, no hardware store visits — just…
couldn't get tinkerman's mount to do what i needed without drastic modification, but was inspired
Update 24/02/26: Corrected an issue with the bearing retainer threading and file names. This is a remix of nhchiu 's fantastic Switchwire Double Shear Motor Mounts redesigned to work with the Enderwire conversion. Other than the supplied…
Printed at .2 layer height with organic supports for the little tabs. Upgraded model should fix the gaps shown in the photos. I just didn't bother to print another one because this one works, it's in a place nobody sees, save materials…
1. Add a hole for screw. 2. support a bit wider ziptie. Thanks for @russdogg creation!!
Here is a multiboard pegboard click to hold your small wire spools with a 3/8in wooden dowel rod. Printing Instructions: Follow the standard instructions for all multiboard prints: 0.2mm layer height, 15% infill, 3 walls, no supports.…
Was redoing my capture setup and figured there must be a better way than letting my XR1 Lite just chill on the ground under my PC. Seeing as my PC sits on a wire shelf, I'm sure I can just jump into Tinkercad and quickly whip something…
This is a simple wire spool holder & dispenser designed to fit most wire spools sold on Amazon. The spools in this design have a radius of 55mm so any spool below that size should work fine. The design has a built in space for wire…
Replacement latch for the wire feeder cover on certain Panasonic robotic welders. The bolt holes are meant to be added later after the original mounting holes have been measured to accommodate any differences.
Spacers for a wire fence / mesh panel in order to mount the mesh panel to a wall or fence. Available in two lengths: 20mm 40mm Use the appropiate hardware for your backwall (wood = woodscrews / concrete, bricks: plug + screw) Probably the…
If your door is framed with brick molding, you don't have room to mount a Ring wired doorbell flat against the molding. This plate conforms to common brick molding and provides a flat surface to mount the doorbell. This design works…
Printed laying on its side with the port for the USB pug facing up. No supports needed.
I'm really glad you like it! Please support me by liking and downloading it.
This is a channel for wiring to mount at the base of your printer. This will work for 2020 and 3030 channel. They are 150mm in length.
Use this to add a 1/2 inch tube extension to your Klein wire and cable pulling lubricant . I used this tubing: Eastman 3/8 Inch ID (1/2 Inch OD) PVC Clear Vinyl Tubing, 20 Foot Length, 98566 . Assembly Directions: Cut desired length of…
For people who dont have the magsafe charger .. Standby Mode dock only for iphone 16 with case/cover wired. Short in length and Fast print (Around 2Hours) . Might work without supports. Inspired by the Scott Yu-Jan Dock Design. Added a…
Printed with 3 walls - 15% infill in PETG.
For assembly, you will need 4 compression springs: length L-10 mm ; width D4.7 mm; wire diameter d-0.5 mm. First, insert the springs into the main part, then install the movable clamps, then insert the pushers ABS, 6 walls, sparse infill…
Wie zu sehen ist, setzte ich die Klemm Stopper für meinen Sonnenschutz auf der Terrasse ein. Da die Klammern die den Sonnenschutz halten sollen, bei Wind nicht mehr richtig halten, musste etwas neues her. Die Stopper können ohne jegliche…
A supplemental badge that changes the "PRUSA" text on the frame to "PRUSAWIRE" with the Positron logo to the side. There are 2 variants of this available: “ Easy Mode ” - The part is printed as a single piece with an optional filament…
A wireless charging dock for the Unfolded Circle Remote 3 that can accept MagSafe (56mm) or third party (58mm) wireless chargers. The base and cover are universal; just pick which cradle charger size you need and print accordingly. I have…
This Mod moves the location of M3 screws further inside the XZ Block so that the Screw can be screwed directly to the profile without going through the Linear Rail.
I needed a fully adjustable hook for various applications. I will include the Onshape file link with editable variables so you can totally customize this to your needs.…
Flat radial antenna wire winder inspired by Chelegance MC-750/MA-12 vertical antenna which has a larger winder for 4 radial wires. I made this one shorter and smaller to work with the StLouis POTA 20 QRP Antenna kit which relies on radial…
I designed a simple Snorlax frame for my phone charger. The unit is designed for a large charging pad that I sourced from Amazon. If you have a different charger, I included an insert that is sized for the 56mm magnetic chargers. The…
DIY Mouse charging dock which works with any logitech mouse that is Powerplay comatible as it uses the two charging connectors on the bottom. Part list: 3D Printed parts: 1x Base 1x Coin 1x Body Electronics: 1x TP4056 usb-c board 2x ~5cm…
Feet cups to mount your Xlaserlabs laserwelder and feeder safely on a cart without permanentlee fastening the machines
For the conversion ot the electrics in my KR51/2L I modeled the housing of the original simson wire connectors. The connectors and mouting holes fit. Some parts have been strenghtened. More versions with more connectors or different…
Need a helping hand while soldering 2 wires together? Meet the “Wire Wizard”. This is a tool where you can clamp 2 things close together and do your soldering job. Mostly it would be wires, but also resistors or other smaller stuff can be…
Design Description: This storage box is designed to hold the trailer wire and connector which is stored at the rear of a vehicle. I designed it to attach to the bottom of the bumper on my 3rd gen 4runner. It's designed to use 2x M5 bolts…
Combines front_grill_left and front_grill_right into a single piece. There is also an option with a DSI cable passthrough for raspberry pi screens.
Es un diseño de un American wirehair , con la carita en relieve para hacer llaveros. Si eres un amante de estos preciosos gatitos este modelo te encantará. La descarga está compuesta por 2 archivos: -Archivo STL - Archivo 3mf para…
Had some larger spools i wanted to put on the skådis. Holds 6 spools up to 25mm wide and 65mm diameter. Spacer is specifc for the spools i had to get a snug fit, can be adapted in slicerby changing Z-scale to fit your needs. (Spacers are…
This is a protective cover cap designed for the Voron ERCF Filament Stress Sensor . Its purpose is to hide and protect the wire soldering area, giving the sensor a cleaner look and additional mechanical protection. Features Protection:…
3 perimeters 15% infill Printed with PETG No supports required Iron top surfaces (optional) EDIT: Replaced model file with corrected file. Original file had mounting holes at 5mm apart, but was not on a 5mm grid. Changed spacing for 5mm…
