Arctis Nova Pro Wireless Under-Desk Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An under-desk mounting harness for the Arctis Nova Prime Wireless base transmitter.
- Rating
- 4.909 / 5
- Likes
- 195
- Downloads
- 2,251
- Makes
- 13
- Views
- 9,741
- Reviews
- 11
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial
Do you have an Arctis Nova Pro Wireless? Do you like a clean looking desk top? Do you not want to have to reach too far to adjust the volume or other settings on your Arctis Nova Pro Wireless?
If your answers are Yes, then here is a solution that may interest you.
The Arctis Nova Pro Wireless Under-Desk Mount hugs the wireless base station, holding it close to the underside of any flat surface. Mounting is intended for under your desk, but could also be mounted in a bookcase or under a shelf.
Mount it wherever is most convenient for you, giving you easier access, not worrying about it sliding around or getting nudged off your desk by a furry friend.
Keep in mind the battery slot side when mounting, ensuring enough clearance to swap out the batteries for charging.
Assembly
Four M3 bolts, 8-10mm in length and four M3 nuts hold the top and bottom pieces together.
Insert the nuts in the slots, place the Wireless Base Station in the bottom part, then secure the top with the M3 bolts.
Secure to underside of flat surface with screws that are of proper length for the desk/surface you are screwing it into. I used some #8 x ½" self-tapping screws.
Printed in PLA, but most materials should work.
Can be printed without supports, but if you're unsure, supports for the bottom piece may prevent failures.