MagSafe iPhone Wireless Charger Mount with Captive Nut for Friction Arm.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Position your MagSafe with a 1/4 20" thread and a friction arm. Printed with an embedded nut by pausing/filament change.
- Rating
- 5 / 5
- Likes
- 39
- Downloads
- 94
- Makes
- 2
- Views
- 1,509
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial
I wanted to be able to control the placement of my MagSafe charger, and since I have plenty of photography friction arms with ¼ 20" threads, I decided to create a mount with a built in thread.
The print requires a standard ¼ 20" nut to be embedded. When Slicing, add a layer change in purse slicer to pause the print and move the print head out of the way. I printed at 0.30 Draft and the layer change was at layer 23.
The print will start normal but then perform a filament change operation to give you time to hand place a nut inside.
Once printed, The MagSafe is a friction fit into the mount. Then spin onto a friction arm or any other accessory with a ¼ 20" screw and place your iPhone anywhere.
I put mine on the inovativ digiplate pro as part of my workflow. so when I put my phone down, it charges and keeps the screen in view.
