MagSafe iPhone Wireless Charger Mount with Captive Nut for Friction Arm.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Position your MagSafe with a 1/4 20" thread and a friction arm. Printed with an embedded nut by pausing/filament change.
- Ocena
- 5 / 5
- Polubienia
- 39
- Pobrania
- 94
- Wydruki
- 2
- Wyświetlenia
- 1509
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted to be able to control the placement of my MagSafe charger, and since I have plenty of photography friction arms with ¼ 20" threads, I decided to create a mount with a built in thread.
The print requires a standard ¼ 20" nut to be embedded. When Slicing, add a layer change in purse slicer to pause the print and move the print head out of the way. I printed at 0.30 Draft and the layer change was at layer 23.
The print will start normal but then perform a filament change operation to give you time to hand place a nut inside.
Once printed, The MagSafe is a friction fit into the mount. Then spin onto a friction arm or any other accessory with a ¼ 20" screw and place your iPhone anywhere.
I put mine on the inovativ digiplate pro as part of my workflow. so when I put my phone down, it charges and keeps the screen in view.
