Search results: magnet

Counting matching models…

Mini Articulated Dragon (Magnet/Keychain)

Magnet Size 6x2mm * for commercial license, Please visit my Patreon

Downloads: 91,066
Likes: 9,139
Rating: 4.93

Printableskaje

Magnetic Holder for Pushbutton Switch

This little gizmo holds a miniature pushbutton switch (see photos) and has magnets on the bottom to enable it to be held firmly on steel/iron metal surfaces. The pushbutton switch used is designed to be panel mounted in a 1/4" (7mm) hole.…

Downloads: 27
Likes: 5
Rating: 0

Order a print of this model

PrintablesJeff M

Magnetic Case for Synaptics Coralboard SL

Magnetic Case for Synaptics Coralboard SL A compact magnetic enclosure designed for the Synaptics Coralboard SL development board. The enclosure provides quick access to the board while maintaining access to essential development…

Downloads: 0
Likes: 0
Rating: 0

Order a print of this model

Printables._.

Hma Radio PTT Switch Enclosure for M12 Push Button, Snap-Fit Magnetic Base

Overview A compact desktop housing for the common 16 mm, M12x1 thread momentary push button (the red-cap style). The base snaps on without screws, a hidden magnet holds it to steel surfaces, and the cable enters at an upward angle to keep…

Downloads: 0
Likes: 0
Rating: 0

Order a print of this model

Printables

Prusa Mini Enclosure Door Handle with PTFE Magnetic Coupler

About I used hole in the doors of the Original Prusa MINI Enclosure as an entry point for filament PTFE tube. Moved handle for fingers a bit lower, and added magnetic coupler in there for s 6x2mm magnets, which are popular in gridfinity…

Order a print of this model

Printables

Pokemon Electrode - fridge magnet

Easy to print magnet for fridge - pokemon electrode. You need one magnet 4x2mm

Order a print of this model

Printables

Blink (4th Gen) Outdoor Security Camera Rubberized Magnetic Mount for Vans

I've been testing the battery operated Blink Security Cameras (4th Generation) for my Promaster van. I wanted to make a magnetic mount that I could use on the outside. I wanted to use a large rubberized robust magnetic that wouldn't…

Order a print of this model

Printables

Voltorb - Pokemon fridge magnet

Easy to print magnet for fridge - pokemon voltorb. You need one magnet 4x2mm

Order a print of this model

Printables

Demon Slayer Zenitsu Agatsuma Magnet | Decoration For Whiteboard, Refrigerator, Locker, Cabinet | Home & Kitchen Essential, Classroom Office Supplies | Anime Gifts and Collectibles

DEMON LSAYER FANDOM: Add some Demon Slayer flair to your refrigerator or any metal surface with this Zenitsu Agatsuma magnet. Category: 2D Art

Order a print of this model

Printables

Magnetic Pencil Holder

Slides onto a pencil. Holds a 6mm x 3mm magnet. Suggest to superglue magnet in place. Quick to print. Print in TPU.

Order a print of this model

Printables

Watch Band Magnetic Clasp

I modified the standard link to incorporate circular slots for magnets. I also created a spring clasp, but I like the magnet version better. And I made a female-to-female link segment. I've added all the files here. If you have a FitBit…

Order a print of this model

Printables

Magnetic chess board

Discover our 3D-printed chessboard with embedded magnets—a perfect blend of modern technology and classic strategy. This sleek, durable board features magnets that keep pieces securely in place, ensuring a stable and uninterrupted game.…

Order a print of this model

Printables

Fidlock Twist Magnetic Bike Base - 13x2.5mm magnets - Remix

Replica of the genuine Fidlock magnetic base. Model has two internal cavities to drop in magnets during print then print over the top. Pause print at desired layer height to place the magnets. (Layer 60) Magnet size is 13x2.5mm. Careful…

Order a print of this model

Printables

Flex Cup Insert for Magnetic Tray

The first iteration is a single insert for a 3" magnetic tray. The one in this set . In addition to being a great TPU stress test, the idea here is that it's way easier to pick up all the parts in the tray at once by just lifting the TPU…

Order a print of this model

Printables

Flex Disc Insert for Magnet Tray

I set the print height at 0.20mm for three layers of TPU. Then, stuck in place with thin double-sided tape. The idea really works with any filament, but I like TPU in this application for the cushion effect.

Order a print of this model

Printables

Magnet Insertion Tool v2

UPDATE 24.09.2024 8x3mm Magnet Variant added (not tested by me as i dont have those magnets. These magnets may be too strong for this variant) UPDATE 20.09.2024 6x3mm Magnet Variant added INTRODUCTION v2 of my Magnet Insertion Tool, with…

Order a print of this model

Printables

Magnetic Quarter Launcher! Coin Flipper!

Play by yourself or compete with an opponent or play with teams; you make up the rules for your game! Hardware needed: 2 x Neodymium magnets, 5mm x 10mm x 60mm. 1 x steel rod, 3mm diameter x 65mm long. Glue (optional) 4 x Anti-Slip self…

Order a print of this model

Printables

K1 Series Quick release magnetic tool head cover.

Note:- The rear portion that attaches to the printer is included ‘ONLY’ in this download set. If you decide to use one of my other alternate cover designs you will need the back plate from t his Version .…

Order a print of this model

Printables

Magnetic storage box for fridge

We do have a lot of magnets from WolffKids to plan the week together with my kids. To organise the magnets itself I was looking for a solution. The vendor does have a similar one but I wanted to design it myself. The box can be printed…

Order a print of this model

Printables

Tiny Whoop Drone Racing Gate (fully printable, parametric, magnetic)

Print your own Tiny Whoop Gates! I hope this serves you well and feel free to give me any feedback or ideas for improvements. Have fun! Main loop This split into several parts (e.g. 4 or 6). These are just stuck together and hold well.…

Order a print of this model

Printables

Magnetic or Clip Hexagonal Token Trays, Dice Trays & Dice Tower.

This is a set of token trays, dice trays and a dice tower with tray. Each one has a width (face to face) of 100mm (4") and a height of 12mm with a curved 10mm deep x 90mm wide well. They can either be clipped together using the supplied…

Order a print of this model

Printables

Parametric Laser Cut Gridfinity Base Plate with or without Magnets

Fusion360 Parametric Laser-Cut Gridfinity Base Plate by The Mad Noodle Introducing a versatile and customizable Gridfinity Base Plate designed for laser cutting! This fully parametric design, composed in Fusion360, offers flexibility of…

Order a print of this model

Printables

Screw Tray with magnets

This screw tray was designed to collect the screws when taking electronics apart ;) It's a bit higher (22mm tray inside) to keep a decent amount of them. The rounded edge on the inside is to get the screws out easier. At the bottom of the…

Order a print of this model

Printables

Customizable knife box with magnetic lid

I always wanted to take my favorite knife with me to picnics or the pool. So I designed a fully customizable box for this knife held together with small magnets. The box is fully customizable (see pictures) in Fusion 360 where it was…

Order a print of this model

Printables

Magnetic plumbus (camera mount)

I needed a way to mount an esp32-cam case to a metallic surface and had some 20x4mm magnets laying around. I printed this in TPU and it turned out ok. To make it work: Pause the print and insert magnets at the layer just before recesses…

Order a print of this model

Printables

7 Magnet Habach Bar Array

This is the case for a 7 magnet habach array that a friend requested. It requires seven cubic magnets 1cm x 1cm x 1cm with known poles. Please note that this can be a dangeous item to make and should not be played with. Habach arrays are…

Order a print of this model

Printables

75 mm Large Magnetic Cable Arch

Inspired by the LTT magnetic cable management holders I designed these to go with 16 mm diameter x 5mm high screw in magnets. These use M3 countersunk screws and 4 mm high heat set inserts. Each Magnets:…

Order a print of this model

Printables

75mm Small Magnetic Cable Arch

Order a print of this model

Printables

50mm Tiny Magnetic Cable Arch

Inspired by the LTT magnetic cable management holders I designed these to go with 10 mm diameter x 2.65mm high screw in magnets. These use M3 countersunk screws and 4 mm high heat set inserts. Magnets:…

Order a print of this model

Printables

Magnetic Velcro-Tie Mount

Order a print of this model

Printables

Keystone Magnetic Mount

This magnetic keystone single jack mount designed these to go with 10 mm diameter x 2.65mm high screw in magnets. These use M3 countersunk screws and 4 mm high heat set inserts. Magnets: https://www.amazon.com/gp/product/B09ZLFNZ4S…

Order a print of this model

Printables

Dual Keystone Magnetic Mount

This magnetic keystone dual jack mount designed these to go with 10 mm diameter x 2.65mm high screw in magnets. These use M3 countersunk screws and 4 mm high heat set inserts. Magnets: https://www.amazon.com/gp/product/B09ZLFNZ4S Inserts:…

Order a print of this model

Printables

Haken und Rasiererhalte für Duschregal mit Magnet

Haken und Rasiererhalte für Duschregal mit Magnethalterung. Die Magneten halten die Haken nicht. Sie dienen der Beschwerung und sollen das leichte verrutschen am Metallregal verhindern. Die Magneten haben die Masse 6mm x 2mm

Order a print of this model

Printables

Magnetic board game bits trays for 6mm x 3mm magnets

Modified the magnet holes to fit 6mm x 3mm magnets Also had to modify the hole tolerances so its easier to print the overhangs, but will no longer be able to pressure fit the magnet in Had to thicken the walls a bit to fit the bigger…

Order a print of this model

Printables

Magnetic Hotswap Adapter

Magnetic hotswapping adapter: This adapter allows for quick swapping of the pens during multicolor prints. It uses 20mm 11mm 2.5mm Neodym magnets. Insert them after the print with double sided tape.

Order a print of this model

Printables

Ergonomic Magnetic Paint Handle

This is designed to have an 8mm x 4mm round magnet inserted in the center. This handle should feel like the new Citadel painting handle for small models, however I designed it to work with bigger hands. This handle will work great with…

Order a print of this model

Printables

Magnetic Box

165mm x 65mm Magnetic Box It needs 8 - 5x3mm magnets

Order a print of this model

Printables

Magnetic Latch for Ikea's Besta doors

I am trying to create a dry box within an Ikea closet. Apart from a way to remove moisture, I needed to seal the edges. However the seal kept the door open. Since my closet dry box is experimental, I did not want to commit on an…

Order a print of this model

Printables

Magnetic Spool Rollers/Holder - RatRig Style

The original model needs some tolerance prints to figure out the correct scale % so the bearing holders snap together. You may also want to do a tolerance print for the magnets. There are lots of tutorials on how to do this. Otherwise,…

Order a print of this model

Printables

Magnetic snap sunglasses case for phone wallet xperia 10 iv

Case for magnetic sunglasses from owndays snap series, with elastic band slot, fits over a sony xperia 10 iv wallet, Requires: 4 * m2x16 bolt 4 * m2 nuts felt/soft material to line case 150mm * 20mm elastic loop (I used 300 mm * 20mm and…

Order a print of this model

Printables

ONE PIECE - "To Be Continued" Fridge Magnet

“To Be Continued” Magnet - One Piece This 3D-printed magnet features the famous “To Be Continued” text from One Piece, perfect for fans looking to add a subtle touch of their favorite anime to everyday life. The model is designed to fit…

Order a print of this model

Printables

Friction Fit Anderson Window Contact Sensor Magnet Holder

Depending on your windows and printing tolerances, you may print in ASA or PETG if the holder fits snugly. I printed in TPU with the flexible wing version and they fit securely, without any glue, and are easy to remove.

Order a print of this model

Printables

Ring Indoor Camera Magnetic Mount

This is a magnetic mount to allow easy repositioning of a Ring Indoor camera, uses two 8 x 25 x 2mm magnets. I've included a Fusion 360 file so if you want different magnets it is easy to do, if the new magnets are rectangular just change…

Order a print of this model

Printables

STRECHR.SPL - Magnetic Split Ball Stretcher

KDxGP STRECHR.SPL Check out my socials and other things at https://linktr.ee/KDxGP Like my creations? Consider buying me a coffee ☕ at https://www.buymeacoffee.com/KDxGP. Thank you! STRECHR.SPL comes in two different heights: 15mm and…

Order a print of this model

Printables

Realistic octopus with longer magnetic arms

I really love the look of the realistic octopus head by Stanos , but I wanted the nice articulated arms like those from McGybeer 's octopus. While looking around, I realized I could combine everything and even add longer arms. Since I…

Order a print of this model

Printables

AG (Atarashi Gakko) Magnet

I'm just a big fan of AG! Also, this model uses 30mm by 1mm magnets

Order a print of this model

Printables

Gyoto Magnetic Knife Holder With Edge Guard

UPDATE: 3-1-2026: Added Edge Guard and drill guide stls and photos. Got this knife for my girlfriend for her bday and wanted to do something to make it easy to store and also look interesting. This is the knife if anyone is interested:…

Order a print of this model

Printables

Magnetic DNA / RNA Tiles

Explore the Building Blocks of Life with Magnetic DNA/RNA Tiles! Unlock the mysteries of genetics with this innovative set of magnetic DNA and RNA tiles. Designed for educators, students, and science enthusiasts, these colorful tiles…

Order a print of this model

Printables

Magnet Attractor

This housing holds sets of magnets in positions that generate an equilibrium of forces where the magnets remain close, but do not touch. The 6 holes at 60 degree separation holds four 6 mm diameter, 2 mm thick rare-earth magnets. The…

Order a print of this model

Printables

DELTA Q w magnetic joint and more

Taking the thing http://www.thingiverse.com/thing:351236 , I made some improvements, as magnetic joint, spool holder, endstop switches, carriages with 608zz, effector with autoleveling sensor and power plate with switch and fuse. All was…

Order a print of this model

Printables

Magnetic Remembrance Poppy

I always want to wear a poppy for Remembrance Day but always wind up poked by the straight pin versions or end up having them fall off. Last year I lost the backing off the flag pin that I had used to replace the straight pin for a few…

Order a print of this model

Printables

Magnetschlüssel Ersatz / Magenetic Key Replacement

--- English version below --- Das Gehäuse eines der Magnetschlüssel für die Schubladen-Kindersicherung ist auseinandergebrochen. Daher habe ich einen simplen Ersatz für den inneren Magneten erstellt. Passt für einen Rundmagneten D 20mm /…

Order a print of this model

Printables

Soldering aid - clamp with simple internal magnetic base

I really wanted to make this work without the TPU base as i dont have TPU. And I only plan to use this on a metal sheet instead of its family of tools. So made this simple remix in tinkercad. The updated base has a 11mmx2.2mm hole inside…

Order a print of this model

Printables

Wage War Logo Magnet

Decided to make a fridge magnet for one of my favorite bands There are 2 cavities in the model for 15x3mm magnets. All you have to do is put a pause in while slicing the model.

Order a print of this model

Printables

Expandable 3 sloped hexagon parts tray with sockets for magnets

Just a smaller version of the original design. My work table is too small for the original design.

Order a print of this model

Printables

Card stand for magnetic holder - engraving not included

These i printed for these magnetic hard cases i have, no idea if they're universal, i dont collect cards usually. The cases i have measure around 7mm in thickness and 73mm in length, hopefully this helps to know if it'll fit your holders

Order a print of this model

Printables

Magnetic Case for Apple TV Remote - Model A2540 (8x3 Magnet)

Changed magnet size to 8x3 because that's what I had.

Order a print of this model

Printables

Micro travel case with magnetic lid (Print in place)

I needed a small case to carry my earplugs so I designed this box. But it can be used to store all kinds of small items that need protection. It requires 2 cylindrical magnets with a diameter of 3mm and a height of 2mm. It is a print in…

Order a print of this model

Printables

folding ruler 3m magnetic hinges

A foldinge ruler 3m (extended edition) to measure furniture, rooms or makes. This model provides insets for 10x2.5mm round magnets as hinges and 6x2mm magnets for stability and snap into position. They all should be aligned in the same…

Order a print of this model

Printables

Magnetic Stud Finder

I lost my CH Hansen magnetic stud finder so I made this. I used a total of 4 20x10x3mm magnets and inserted them into the print with a pause in the gcode. This stud finder also features a window so that you can mark a center line. EDIT: I…

Order a print of this model

Printables

Wire Mount Magnetic

This model allows you to organize your cables with 10x3mm magnets instead of screwing into your walls. Insert the magnet into the base and run the cables as you normally would. I also included the F3D file so you can change the size to…

Order a print of this model

Printables

Koala Magnet

This is a Koala Magnet which takes 2 neodymium 6mm x 3mm magnets pressed into the back. Printed at .2mm Layer Height, 2 wall loops, Grid infill pattern at 15%. No support, raft or brim required. I used silk silver and glow in the dark…

Order a print of this model

Printables

Bento Box - Pins instead of Magnets

Dont have magnets (yet)? Use those pins to connect the bento boxes. Print with precise wall 20mm layer height more elephant correction (ca 0.25mm)

Order a print of this model

Printables

Fox Magnet

Includes pause to be able to insert the 8x3 magnets.

Order a print of this model

Printables

Platypus Magnet

Includes pause to be able to insert the 8x3 magnets.

Order a print of this model

Printables

Magnetic Puck Screen Holder

Store your 58mm puck screens with this magnetic holder. Uses 10mm x 3mm magnets ato hold on to your coffee machine.

Order a print of this model

Printables

GEN2 185 Decor Gridfinity Magnetic Drawer

JERRARI3D.com The GEN2 Decor Series is the next evolution in the most versatile 3D printed drawer system, The GEN2 Modular Storage System . You can now easily swap faceplate and handles to fit the mood of the room you want. Being able to…

Order a print of this model

Printables

Drywall Magnet Mount

I used this to hold a swinging frame to the wall. I glued an 8-mm neodymium magnet in the back side and screwed it into a drilled hole in the drywall.

Order a print of this model

Printables

Connetix Magnetic Tile - Mario Warp Pipes

This is a warp pipe made for Connetix magnetic tiles with an open hole for figurines to go through. There is an option for 1x1 squares and 2x2 squares for larger figurines. The magnets I used are pictured from Bunnings Australia but I…

Order a print of this model

Printables

Connetix Magnetic Tile - Blank for Remixing

There are two tiles, 1x1 and 2x2 compatible with Connetix tiles. Of course it's way better and cheaper to go buy the actual tiles than print basic squares but I have uploaded the bases I used to make my Mario Warp Pipe for figurines in…

Order a print of this model

Printables

GEN2 270 Decor Gridfinity Magnet Drawers

Order a print of this model

Printables

GEN2 165 Decor Gridfinity Magnetic Drawer

Order a print of this model

Printables

Miniature Bases w/ magnets

Miniature bases of various sizes; 28mm, 40mm, 50mm, 65mm, 80mm, 100mm, 120mm, 140mm, 160mm. 8x2mm magnets 2/21/2026 - Updated files, and added .f3d file

Order a print of this model

Printables

GEN2 185 Classic Gridfinity Magnetic Drawer

JERRARI3D.com The GEN2 Series is the next evolution in the most versatile 3D printed drawer system, the GEN2 Modular Storage System . You can now easily swap drawers around thangs to the fully 3d printable QuickLock mechanism design Wait…

Order a print of this model

Printables

Magnetic bases for tabletop minis

Optimised for FDM printing with top flat on build plate. Compatible with 8x2mm magnets. Sizes Include: ROUND / STANDARD : 25mm 28mm 32mm 40mm 50mm 65mm 80mm 90mm 100mm 130mm 160mm LONG / VEHICLES / MOUNTS : 25 x 70mm 32 x 80mm 40 x 95mm

Order a print of this model

Printables

4" Magnetic dust port

This is my version of the magnetic dust port. It uses 14 8mmx3mm magnets. It is super strong. I made the models, so they require no supports. They can be printed with the magnet side up. If the magnets you use are polarized, you can…

Order a print of this model

Printables

Magnetic fidget slider toy

Hi, I made a magnetic fidget slider toy. You can slide quite well with one hand. What do you need extra? Magnets 4x1 mm Super glue I bought the magnets on Amazon: https://amzn.eu/d/193d1o2 Print settings: No support required Infill: 10%…

Order a print of this model

Printables

Magnetic keys holder

This is a Fun and convenient way to hold your keys. Depositing into the upside down magnetic bowl is satisfying. When your in a rush you can quickly grab them with ease. There 3 components of the Magnetic keys holder: The actual holder…

Order a print of this model

Printables

MARKAL PAINT RITER MARKER MAGNETIC HOLDER 5X 14.5MM DIA MARKERS

MARKAL PAINT MARKER MAGNETIC HOLDER 5X ~14.5MM DIA MARKERS. PRINT BASE AND 2 TABS. INSERT 2X 3/8" DIAMTER X 1/4" MAGS THEN PRESS IN THE TABS. SHOULD WORK WITH OTHER SIMILAR SIZED MARKERS. LINK TO MARKER…

Order a print of this model

Printables

Gridfinity Workzone Magnetizer Holder

I was looking for a holder to store my Workzone De-/Magnetizer in a gridfinity manner. Unfortunately, I havent found any. Eventually, I had to design my very own holder for this purpose. Gridfinity is the ultimate storage system, created…

Order a print of this model

Printables

Bike Brake Magnet Holder

a solution for keeping the magnet portion of a bike's brake sensor on the lever. adhesives not working? just set it in. Aditional material: a single M3 screw, nut, and some CA glue to keep the magnet to the holder in case of bumpy rides.

Order a print of this model

Printables

Fidget Slider with interchangeable textures and magnets

This modular fidget slider uses two magnets and an interchangeable texture plate to create maximum satisfaction. 10 different texture plates are included in the model files. There are 4 printed pieces: The base, the housing, the texture…

Order a print of this model

Printables

OT6 Tablet Magnetic Frige Holder

A Simple Magnetic Frige Holder for the OT6 Tablet it uses 12mm x 5mm Magents for Strong Holding Source Model can be found here:…

Order a print of this model

Printables

Magnetic 4-Inch Fume Exhaust Vent for Voron 2.4 and Trident

Need a 4-inch fume extractor exhaust connection for your Voron 2.4 or Trident? This magnetic 4-Inch Voron fume exhaust connector remixes the ring from JCShumpert 's Magnetic Fume Exhaust (4 inch duct) for EnXLosure Backpanel for use in…

Order a print of this model

Printables

Mewtwo Pokemon simplified, flat base with magnet space

There's space for a 6x3 magnet in the base, but if you don't need one just don't worry about it and print as is.

Order a print of this model

Printables

Toothless 'herb' Grinder "upgraded-V3" // Magnet click-effect // MMU3 Motive-options!

Thanks @ROPI_326473 for share this cool projekt! Added a press-in tool wherein a magnet is pressed in to get all the magnet mounted always in the same direction! The tool is used after that to only press in all magnets from top sided the…

Order a print of this model

Printables

Magnetische Halterung für Fenix E28R (nicht V2.0)

Eine magnetische Halterung für die Fenix E28R Die V2.0 der Taschenlampe wird nicht passen! Zusätzlich wird eine Sechskantschraube M5x12 mit passender Mutter und ein runder Magnet 20x6mm benötigt! https://amzn.eu/d/0q1aXlV Der…

Order a print of this model

Printables

Magnetic Mount for the BTT Smart Filament Sensor v2

I have my Voron installed under the desk, making access to my filament sensor difficult. Therefore, I decided to relocate it to a more convenient place. However, I was unable to use any existing mounts as most of them are dedicated to the…

Order a print of this model

Printables

dual 4010 turbine magnetic bed fan plate

stuff needed: possibly a drill to drill the mounting holes on the 4010 turbines to fit M3 bolts, because I can't be bothered buying M2.5's; 8 M3x6 bolts, possibly M3x8 with a washer; 8 6x2 or 6x3 magnets; superglue to secure the magnets;…

Order a print of this model

Printables

Cable holder with magnets and velcro cable ties

The holder uses 4x magnets of the size 8x3mm (Link to aliexpress: https://s.click.aliexpress.com/e/_oDwm2eR) And i also have some inserted slots to use some velcro cable organizer 10mm width (link to aliexpress:…

Order a print of this model

Printables

magnetic wrist band connector

Wristband connector. Use magnets 3mm diameter, 2mm height. press magnet into the hole, keep polarity of the magnets in mind. I used PETg for best results. Additional notes I'm interested in your feedback to improve my stuff! So give me…

Order a print of this model

Printables

Magnetic gun and magazine holder

For printing use PETG. The only thing you have to buy is 25x25x5mm neodymium magnet. Also you should use supporst in place where magnet is going to be pushed and use super glue to glue the magnet.

Order a print of this model

Printables

Makita bit holder with adaption for Magnetto magnet

This is a remix of the Makita bit holder with adaptions to: - add a Magnetto magnet - reinforce the holders - lengthen the holders for easier access once the magnet is added. ### Printing suggestions: Print it standing on the bottom end…

Order a print of this model

Printables

GEN2 165 Classic Gridfinity Magnetic Drawers

Order a print of this model

Printables

Miska pro demonstraci magnetických vlastností látek

Při brouzdání internetem jsem narazil na toto video: (a moc se mi líbilo). Teorie je např. tu: http://edu.techmania.cz/cs/encyklopedie/fyzika/magnetismus/magneticke-latky Pro demonstraci ve třídě budete potřebovat: feromagnetickou látku…

Order a print of this model

Printables

Sonos Roam Speaker Magnetic Holder

Attach a Sonos Roam speaker to a wall (or golf cart) with a powerful bar magnet. Recommended Material I recommend printing with a heat-resistant material, like PETG , if you intend to store it in warm places, like a car on a sunny day.…

Order a print of this model

Printables

Magnetic Key Holder - Penguin Style (FreeCAD)

I found the original Magnetic Keyholder and printed five of them for our household - they are very useful and really fun. A year later, my wife liked to have it in shape of a Penguin to gift our friends for christmas. So I accepted the…

Order a print of this model

Printables

Magnetic Power Bar /Keyhole Mount

I saw what LTT was doing with their MCM system and thought it would be fun to make a DIY version of the PBK to I could cleanup under my desk. Currently using 2 pairs for a small switch and a power bar. Printing in PLA provides a bit more…

Order a print of this model

Printables

Portal - Level Warning Plaques REMIX (Magnets)

6mm x 2mm or 10mm x 3mm magnet holes. You can mix and match if you want. I found the 6x2 perfectly strong enough but I also have lots of 10x3 so I added those (very strong). They press-fit for me, but your mileage will vary. The 6x2 holes…

Order a print of this model

Printables

Magnet Applicator for magnets depth 1,2,3,4mm

Magnet applicator for both poles marked + and - . Dimensions are available from 4mm to 10mm for a depth of 2mm and 4mm to 15mm for depth of 3mm. If anyone would like deeper or larger just say I can adjust and share. The depth is measured…

Order a print of this model