Circumvolving Dice Case w/ Hidden Magnetic Dual Latch
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An eye-catching dice holder with rotating top; uses a hidden magnet latching mechanism to lock in place, open or closed.
- Rating
- 5 / 5
- Likes
- 53
- Downloads
- 101
- Makes
- 2
- Views
- 776
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution
A curvy eye-catching case with a rotating top that uses hidden magnets to loosely lock the top in place in both an “open” and “closed” position. The three compartments are sized to conveniently fit the standard 7 dice often used in DnD games, but can certainly fit other types of dice as well.
Makes use of twelve 4 mm by 1.5 mm magnets for the hidden latches, such as these. You'll want to either use the color change feature in the slicer or simply pause your printer part way through the print to drop in the magnets before the last few layers of both the case bottom and top are printed. (I've included in the pictures a “section analysis” rendering of both the top and bottom piece that shows where the hidden magnets will reside inside of the print.) Depending on the dice weight and magnet strength, the top can easily slide off if flipped upside down.
For your convenience, I've attached the 3MF files that show the settings I used in the Prusa Slicer to print the one shown in the picture, which include a color change in each to give you a moment to drop in the magnets. FWIW - it may not be necessary, but I also used a drop of glue when putting the magnets in, as otherwise I was worried they were going to jump up of their own freewill and stick to some part of my printer head!
