P
PrintablesAaronTpain
Dice
i made this dice as a game to play with my 3-year-old I hope you live
- Downloads
- 7
- Likes
- 2
- Rating
- 0
Search results: dice
Counting matching models…
P
Printables
Left hand dice
Standard D6 (six-sided) gaming dice in a left hand layout. The left hand layout is slightly different from the more common right layout, which you can easily tell by looking at the relative positions of the 4, 5, and 6. The files included…
P
Printables
Magnetic or Clip Hexagonal Token Trays, Dice Trays & Dice Tower.
This is a set of token trays, dice trays and a dice tower with tray. Each one has a width (face to face) of 100mm (4") and a height of 12mm with a curved 10mm deep x 90mm wide well. They can either be clipped together using the supplied…
P
Printables
Cobra Tap Insert / Indice
Replacement caps for Cobra Aquila taps. These little badges are used to indicate hot or cold tap. I couldn't find anywhere I could only buy them, so I made some. They are blank on top, so you can add a H or C to it. I printed them in…
P
Printables
Tactile Dice / Braille Dice (No supports needed)
Tactile/braille dice, can be printed on the bevel (look at the picture), no support needed. Square side 30 mm. The transparent version is petg, scaled 0.66 for 20 mm side. I used a brim.
P
Printables
Dice Tray
dice tray with dnd logo Print Settings Printer Brand: Creality Printer: Ender-3 V2 Neo **Rafts:** No Supports: No **Infill:** 15 Category: Dice
P
Printables
Parametric Dice
This is my first attempt at doing a parametric design. Please let me know if there are any issues or suggestions. The dice can be resized by changing the parameters. The size, bevel, offset, etc. can all be changed. I included the Fusion…
P
Printables
Plinko Tube Dice Tower
Plinko Tube Dice Tower This is a dice tower inspired by Plinko mechanics. It's designed to provide fair, random rolls while being easy to print on most 3D printers—no supports required. Dice dropped into the funnel bounce off internal…
P
Printables
Dice Tower (D20 Inspired)
A small d20 inspired dice tower. I saw "Dice Tower Shaped Dice tower" (https://www.printables.com/model/863751-dice-tower-shaped-dice-tower) and wanted something similar, but D20 shaped, that could be printed in one go on my Voron v0.2.…
P
Printables
Dummy 13 Fuzzy Dice for Mici's Artemis Lunar Rover
No ride is complete without a pair of fuzzy dice suspended from the rearview mirror. So when I made Mici's Artemis Lunar Rover for Dummy 13 , I had to add some. These dice of course could be used for other vehicles, or even on their own…
P
Printables
7 Piece Dice Masters Set presupported (Lobster Font)
This is a 7 piece dice set that can be printed and used to make masters and cast your own dice or you can just print them and play with them. This set features 1x D20, 1x D12 Standard shape, 1x D00 standard, 1x D10 standard, 1x D8…
P
Printables
Roll-up Dice Box
Dice Tray and Box. These models can be assembled to create a dice box that can be rolled out in to a dice tray. I would recommend gluing felt to the inside to prevent dice from jumping out when rolling dice. Assembly: For the assembly I…
P
Printables
Craps Dice Storage Tube
Print in upright orientation, does not need support. Parameterized Fusion file also included to change tolerances, dice count, and other options.
P
Printables
White Elephant Gift Dice
This is a 6d that has some various outcomes on it for White Elephant Gift exchanges. The idea is everyone picks a gift, opens their gift then everyone goes around in a clock-wise motion everyone rolls the dice, then has to follow the…
P
Printables
Dice Tray with Lid
Dice tray with numbered spots for dice, a section for rolling and a lid. The lid should be a pressure fit. The center section can be use for rolling dice while playing and storing dice between sessions. No supports needed
P
Printables
Dice Jail
This model is a remix of Andrew Miller's (@AndrewMiller_294406) D&D Dice Jail (https://www.printables.com/model/290446-dd-dice-jail/). This version addresses the design suggestions in the comments of the original model. Specifically, this…
P
Printables
Simple Balance Tetris Dice
to make the game even more challenging and exciting, i designed this simple dice
P
Printables
binary dice set
If you have proposals for addon or other please leave a comment and if you like my work please leave a like :-)
P
Printables
Every Day Dice Carry Inserts
This is a collection of inserts for my EDDC boxes. Regarding your needs you can fit the right insert to sort and organize your dice or miniatures and keep them protected. Plus a template to cut liners for the inside of the box. Find the…
P
Printables
Every Day Dice Carry (EDDC) Box "Hex"
Have your dice always with you. This is the Every Day Dice Carry. Keep your dice save and organized with a magnetic box in a slim format. You can add felt, leather or EVA foam to the inside (up to 2mm thick). With one insert, the lid can…
P
Printables
Every Day Dice Carry (EDDC) Box "Ice"
Have your dice always with you. This is the Every Day Dice Carry. Keep your dice save and organized with a magnetic box in a slim format. You can add felt, leather or EVA foam to the inside (up to 2mm thick). With one insert, the lid can…
P
Printables
Every Day Dice Carry (EDDC) Box "Air"
Have your dice always with you. This is the Every Day Dice Carry. Keep your dice save and organized with a magnetic box in a slim format. You can add felt, leather or EVA foam to the inside (up to 2mm thick). With one insert, the lid can…
P
Printables
Every Day Dice Carry (EDDC) Box "Bow"
Have your dice always with you. This is the Every Day Dice Carry. Keep your dice save and organized with a magnetic box in a slim format. You can add felt, leather or EVA foam to the inside (up to 2mm thick). With one insert, the lid can…
P
Printables
Every Day Dice Carry (EDDC) Box "d20"
Have your dice always with you. This is the Every Day Dice Carry. Keep your dice save and organized with a magnetic box in a slim format. You can add felt, leather or EVA foam to the inside (up to 2mm thick). With one insert, the lid can…
P
Printables
Every Day Dice Carry (EDDC) Box "Fire"
Have your dice always with you. This is the Every Day Dice Carry. Keep your dice save and organized with a magnetic box in a slim format. You can add felt, leather or EVA foam to the inside (up to 2mm thick). With one insert, the lid can…
P
Printables
Every Day Dice Carry (EDDC) Box "Water"
Have your dice always with you. This is the Every Day Dice Carry. Keep your dice save and organized with a magnetic box in a slim format. You can add felt, leather or EVA foam to the inside (up to 2mm thick). With one insert, the lid can…
P
Printables
Helix Dice Tower Trays and Extras
I made several trays for the Helix Dice Tower as well as a base connector that can be added to any tray. The Helix Dice Tower is a very compact design and thus is a very light tower. It's recommended to fill it with silicone, resin, sand…
P
Printables
Tree of Life Tome with Pull Out Dice Drawer v1.2
Decorative tome for DND dice rolls Included with internal slide rails and without. Sizing the rails can be tricky to get perfect from printer to printer, so no rails works great as well, the drawer just won't be as secure. Want to buy a…
P
Printables
Dice Cam (6mm)
This webcam rig holds a webcam above a dicetray. So you can add the webcam to any online game you play with webcams to share your rolling results. With OBS or similar software you're also able to directly include the dicecam video into…
P
Printables
Dice Cam (8mm)
This webcam rig holds a webcam above a dicetray. So you can add the webcam to any online game you play with webcams to share your rolling results. This is the 8mm version, made for 8mm thick materials or double layered 4mm. With OBS or…
P
Printables
Cthulhu - Dice Tower
A Dice Tower Depicting Cthulhu in the thinker pose. If you love this design and want to see more consider donating, your donations help me keep creating and sharing new models for free. Thank you for your support! Print Settings Printer…
P
Printables
Dice Throne Hero Randomizer Container
Update 7-18-2026 : Added a larger version to accept more cards as more sets are being released. Its about 1/3 more card storage (Widened the inner are from 20mm to 30mm). Update 2-6-2025 : I test printed it over night and I'm pleased with…
P
Printables
Fishing Dice
2" dice that has 6 different fish types embossed into it. Let the dice decide what to fish for.
P
Printables
Fishing style Dice
Roll the dice to decide how you are going to fish. The 6-sided dice has “Live bait, Top Water, Bottom Water, Casting, Trolling, Artificial Lure” Embossed into the dice. I haven't printed this version out yet, I will update with pictures…
P
Printables
push & roll - Automatic dice tower - carbon style +f3d files
I recently noticed that some of my creations are being shared on this site without proper attribution. I kindly ask that my work be credited as follows: 👉 Please mention my name and link back to my profile whenever sharing my work. Like…
P
Printables
Barrel Dice Cup
This is a dice cup that I designed to look like a barrel. It is not the standard barrel shape and is tapered. I printed it in PLA with supports. It could probably be used as a drinking cup if printed in PETG.
P
Printables
Mini Dice Jail
A small simple dice jail that fits a single d20 comfortably with some room to spare. The bars are a tight fit and might requiring some sanding or scaling depending on your machines tolerances so I have included a preassembled model.
P
Printables
Spiral Shell Dice Tower
I made this tower to see how new fuzzy skin settings work in Orca slicer. They work great, seriously, try them. The one on a photo was done using Billow setting on 0.2 layer. The 3mf for orca is included, but please remember to change it…
P
Printables
dice bead
it's a nice bead shaped like dice and it is useable, great for D&D lovers and for those who don't
P
Printables
Micro Dice Tower (Call of Cthulhu) multi-part color
I increased depth in tower and tray and created multi-part logo to be glued in. OnShape: https://cad.onshape.com/documents/df0a8176e4b8fe7dcebe05ac/w/c01224a287a49e5a526eae28/
P
Printables
Cyclops Dice Tower
After getting the new X-men dice throne box, I wanted to make a dice tower for each character. Added guide pins to hold pieces together while gluing.
P
Printables
Gambit dice tower
After getting the new X-men dice throne box, I wanted to make a dice tower for each character. Added guide pins to hold pieces together while gluing.
P
Printables
Dice
A standardised 6-sided dice. For printing, you should select the standart sidelength of 16mm. The model is fully customizable in OpenScad, using the “dice.scad” file below, however the parameter names are in german. The dice is not…
P
Printables
Dice Egg Slot Test
I just started reworking the diceslots in my MegaTray project. It has this slanted top surface which is part of the style, so I needed to find a better slot to hold the dice, then regular round or hex cutouts. You can check the different…
P
Printables
Complete Dice Mold Collection
The Complete Silicon Dice Making Mold Collection 100% open-source and free, even for commercial use! Printing Instructions I recommend the 0.2 mm Structural Profile, 20% infill. Prints 100% supportless. Requires 6x3 magnets to assemble.…
P
Printables
Imperial Bolter Bullet Dice and Magazin
Do you always wanted to show of with your minis that you are cool? But, your Minis are the same as all tabletopers? Well, I have good news. Here is a good solution to flex your imaginary muscles and show off with this cool pairs of dices;…
P
Printables
BattleStack Expanding Dice Tray (Leather Mod)
The original is a wonderful design, but I wanted to be able to have the panel hinge and have a soft leather base to the tray. I used 3-4oz Milled Leather with contact cement as the adhesive. Works very well!
P
Printables
Dice Holder "Mothership" with lazy susan
This is a byproduct of experimenting with new dice slot geometry. These egg shaped slots are securely holding the dice, but also grant easy access to them. As of the elongated shape, you can easily grab your dice with two fingers, no…
P
Printables
Arcana Dice Tower – Brick Castle Edition (No Supports Needed, Small Printer Friendly)
This brick-style castle dice tower is a perfect addition to tabletop games like Dungeons & Dragons, Pathfinder, and other RPGs. Designed to be functional, visually appealing, and easy to print – no supports required! 🔹 What’s included: 1×…
P
Printables
Small Dice Tower
A small dice tower with an attached tray to catch the dice. Printed with 2 walls and 10% infill it will need only 45g of PLA. Support free.
P
Printables
WARHAMMER DICE TRAY
A Warhammer Themed Dice Tray ✨!CHECK THESE OUT!✨ Check out this new design, it’s a fully print in place storage box for your citadel paints. https://www.printables.com/model/1401252-citadel-paint-box This is a print in place Folding Dice…
P
Printables
Gundam Card Game Dice and Token Organiser
Didn't want to fiddle with the tiny tokens that came up with the Gundam Card Game starter boxes, and have made a little organiser for 16mm or 15mm (Gundam sized dice) dice and my own tokens. The box is sized to match the dimensions of a…
P
Printables
GameGenic Castle Replacement Trays (deck & dice sides)
Almost indistinguishable from the original trays if you print in black. I only made the sizes I need for the accessory trays. If you want more sizes let me know and I can upload some more.
P
Printables
Fully 3d printed DnD Dice Box
Assembly Yet another dice box for DnD (fully 3d printed). Simply print the two main components (top and bottom) and press the integrated hinges together. I've included two styles for the lid: a clean, minimalist version and an optional…
P
Printables
SnapKeep Dice Box (Blank)
SnapKeep — Tool-grade deck storage to keep your dice secure SnapKeep is a rugged, 3D-printable deck box system designed to slot directly into the small-parts bins of Stanley/DeWalt T-Lock organizers (e.g., this organizer ). Its…
P
Printables
Too Many Bones Lid for Splice&Dice Organizer
This is a lid/box for the Splice & Dice Build a Tyrant organizer from “ Too Many Bones Trove Chest Organizers von js500 ". My file only contains the lid, designed by me. To print the organizer itself use the link given above. MY PRINT…
P
Printables
D4 Tooth Dice (DND / TTRPG)
First model since taking a break for the last week. I saw a post about these on reddit a while ago and thought it'd be fun to make my own. I whipped this together quickly with an ico sphere, lattice and shrinkwrap modifier. I made a few…
P
Printables
Dice – 10×10×10 mm
This is my dice. It’s supposed to be printed with a 0.2 nozzle. In the picture you can see the dice printed with AlzaMent PLA+ Blue. The size is 10×10×10 mm. you can remix and sell it, but i like to you say at least “it is from…
P
Printables
Dice for Train Trip
Here is dice for this Train Trip game best suited for toddlers. SLO and EN version. Size: 30 mm https://www.education.com/worksheet/article/play-train-trip/ Trains can be found here: https://www.thingiverse.com/thing:403610 I scaled them…
P
Printables
Bard's Song Book with Pull Out Dice Drawer
This is a difficult model to print. I suggest painting on supports by hand in your slicer. I have included the slicer file I used with custom painted supports. The bridge is printed seperately and then glued on. Strings can be made from…
P
Printables
Mini Plinko Dice tower 15mm
I made this for mini dice 15mm. It still uses M3 screws and nuts. It does need an 84mm x 100mm x 2mm plexiglass sheet for the front. I've also removed the dice holder section because I have dice holders and didn't need that part. I made…
P
Printables
Dice 45 Degree Display - 2d6
A quick model to hold 2 D6 dice at a 45 degree angle so that you can read the side faces easier and provides a modicum of safety that the values won't change. I made this primarily to help me keep track of what season and disc I'm in the…
P
Printables
Binary Dice
This is a 6 sided die with the numbers written in binary. Read as follows: 0001 0010 0011 0100 0101 0110 size is 16x16x16 mm like a standard due and prints in about half an hour. I used 0.4 mm nozzle, .2mm layer height, no raft. Uses…
P
Printables
Lazy Susan dice storage with dice tower
This model makes storing dice for dungeons and dragons' fun, easy, and reliable. Here are some things that i suggest you do for this model: Make the size of the model 140% I highly recommend you use a ball bearing I recommend using PETG…
P
Printables
Super Dice Spiral Spinner Fidget - Print in place
Design Concept This Super Dice Spiral Spinner Fidget combines functionality with artistic design, featuring a spiral body that's both visually appealing and ergonomically design to fit easily into one's hand. Purpose Intended as a…
P
Printables
Super Dice Spinner Fidget - Print in place
Design Concept The Super Dice Spinner Fidget is designed as an all-in-one fun tool combining elements of a dice and fidget spinner. Its unique numerical design allows it to serve both as a spinner and a number randomizer. Use Ideal for…
P
Printables
Dice Shelf
You need some place to show off your dice, have them in reach when in need and also give them the space they need? This is the dice shelf. The egg shape! I was tinkering around with various shapes for slots. The task was to find a good…
P
Printables
Dice Tower with Fold-Up Trays (stronger, better alignment) - 131mm tall
I recommend using the supports I included. The origin is set the same as the model (use supports marked "square" for the tray with ends marked "square") so that you can use the "Join" feature of your slicer. You could also use your slicer…
P
Printables
Universal Board Game Dice
🎲 Classic Dice Game – Ludo / “Člověče, nezlob se” This is a classic board game dice , perfect for games like Ludo (Člověče, nezlob se) and many other tabletop or family games. The design is simple, clean, and easy to print , making it…
P
Printables
Pottery Wheel Zona Paper Dice Sander
Uses an equivalent mini pottery wheel to the kind found on Amazon as well as the combination of 1/8" thick acrylic disks and zona papers . Design includes options for the 6 inch disks or the smaller 4 inch disks . You'll also need 6x2…
P
Printables
Dice game 10,000 Tenthousand!
Compact game box for the dice game Tenthousand (10,000) . We love playing it in the park because it’s easy to bring along, and all you need is the game itself and a phone to record the scores. It fits 6 standard dice (16 mm) and a folded…
P
Printables
Spoon Hive: Dice Hooks
The Spoon Hive is a never ending pattern of dice hooks to have your favorite dice nicely displayed and ready to grab. The special egg shape was designed for a different project and meanwhile I make use of it in a dice shelf or a dice…
P
Printables
67 Dice
Will you roll a 6 or a 7? SIX SEVEN! Print at 90% infill, face down, support on build plate only (to support the bottom digit inset).
P
Printables
Swearing Dice
The meanest dice in town, and it's here to make you and your friends feel like you're twelve again. Roll the dice and read the bad word it shows, it includes: NIGGA; PUSSY; BITCH; MORON; ASSHOLE; DICKHEAD. PLEASE USE CAREFULLY! ADULTS ONLY!
P
Printables
Marko Reaktor dice tower
This CAD-Model a Mako Reaktor from Final Fantasy 7. It's Hollow and has an angular floor and a door at the backside. So you can use it as a dice tower. It is a bit oversized. I printed it with my old ender-3 in Goldem basefill with veable…
P
Printables
Nations: The Dice Game + Unrest expansion store solution
This is my favorite game of all time. I created this design in 2018 and published it on BGG. Only after seven years did I publish it on Printables. The purpose of this project was to reduce setup time and the hassle of handling tiles…
P
Printables
Pokemon Mini Tin Insert 16mm Dice & Small Coins
Pokémon TCG mini tin insert designed to hold 14× 16 mm damage counters or D6's, 5 smaller coins, and 2x status markers
P
Printables
EGYPTIAN OBELISK with hidden dice (Schocken/Schockbesteck)
This is our EGYPTIAN square interpretation of the well known dice game SCHOCKEN (german title). This game is played in many European bars and on partys of corse. It is called SCHOCKEN and all you need is this SCHOCKBESTECK, 3 dice and a…
P
Printables
FREE - Sanctum Twisting Truths - Infinite Dice Towers III
Discover 55 original STL models of Dice Towers, Dice Cups, and their Terrain Versions - everything you need to bring any tabletop game to life. The full project awaits you on my Kickstarter page:…
P
Printables
Gabby dice.
Cute Gabby’s Dollhouse–style dice with a playful cat imprint, perfect for kids’ games, gifts, or decorative play
P
Printables
Dice Potion Bottle - Vase Mode
Dice Potion Bottle - Vase Mode This bottle is designed to hold dice for potions used in TTRPGs like D&D. The model can fit up to 8 regular size d4's, or 10 of the special potion shaped d4's. Printed using vase mode, these models are light…
P
Printables
Dice Tube Magic Trick
This is a clever 3D-printable magic trick in which a die is placed into a tube, visibly locked in place, and then mysteriously escapes. The trick is simple to perform and easy to set up. Ideal for close-up magic, kids’ shows, or casual…
P
Printables
20 sided dice
20 sided dice ready for your flare. Paint your numbers and its ready to game