"It's Probably Fine" Nat 1 DnD Dice Tray
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€6.47 – €7.91 net (excluding VAT)
For file: Tray1 - Probably Fine.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €7.19 excluding VAT (range midpoint).
- Weight reported by the author
- 94 g
- Print time reported by the author
- 7 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A simple dice tray with a fun inscription to reassure yourself while the DM rolls their dice out of your view
- Rating
- 4.857 / 5
- Likes
- 174
- Downloads
- 906
- Makes
- 4
- Views
- 2,392
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Miniature Gaming Accessories
- License
- Creative Commons — Public Domain
This is a hexagon shaped dice tray, 29mm high (1.16") and 150mm wide (5.94") with a raised edge and thick wall for rolling your dice inside.
Inside the tray, there is text and an image that says "It's Probably Fine" with a Nat 1 D20 and that's about it!
3D printing settings
5.14" x 5.94" x 1.16" (130 x 150 x 29mm)
Takes 6h 38 minutes to print at full size. Easily resized.
I use Lychee to slice. I use an Anycubic Kobra 2 Neo, and use the default settings for .200 layer height. I added a brim to keep it from slipping.
For FDM 3D printing. Technically could be done with resin, but it would use a lot.