"It's Probably Fine" Nat 1 DnD Dice Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple dice tray with a fun inscription to reassure yourself while the DM rolls their dice out of your view
- Ocena
- 4,857 / 5
- Polubienia
- 174
- Pobrania
- 906
- Wydruki
- 4
- Wyświetlenia
- 2392
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Miniature Gaming Accessories
- Licencja
- Creative Commons — Public Domain
This is a hexagon shaped dice tray, 29mm high (1.16") and 150mm wide (5.94") with a raised edge and thick wall for rolling your dice inside.
Inside the tray, there is text and an image that says "It's Probably Fine" with a Nat 1 D20 and that's about it!
3D printing settings
5.14" x 5.94" x 1.16" (130 x 150 x 29mm)
Takes 6h 38 minutes to print at full size. Easily resized.
I use Lychee to slice. I use an Anycubic Kobra 2 Neo, and use the default settings for .200 layer height. I added a brim to keep it from slipping.
For FDM 3D printing. Technically could be done with resin, but it would use a lot.