Prusa Core One INDX magnetic Enclosure LED Strip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Magnetic Mount for Prusa 300mm Core One LED Strip
- Rating
- 5 / 5
- Likes
- 30
- Downloads
- 77
- Makes
- 3
- Views
- 587
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Magnetic LED Strip Holder for Core ONE Enclosure (INDX Conversion)
After converting my Core ONE to INDX, the enclosure became very dark, since the front LED strip is now covered/blocked rather than removed.
To fix this, I designed a magnetic mount that clips into the corners of the Core ONE enclosure and holds the original Prusa 300mm LED strip (the same one used in the Core ONE's front lighting). You can place it in just one corner or mirror it on both sides — whatever suits your lighting needs.
In my case, I clamped this strip in addition to the (now covered) front LED strip, and it works really well — noticeably brighter and more even lighting throughout the enclosure.
Hardware needed:
Prusa 300mm LED strip (original Core ONE front light strip)
3x 10x3mm magnets per holder (inserted during printing)
Printing notes:
The magnets are embedded directly during the print — pause your printer at the indicated layer height and insert 3x 10x3mm magnets, then resume printing.