Push Pin Fridge Magnet (5mm diameter magnet)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.07 – €0.09 net (excluding VAT)
For file: Push_Pin_Magnet_5mm_0.2mm_PLA_MINI_5m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.08 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 4.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A simple remix for a smaller (5mm) diameter magnet that looks like a push pin.
- Rating
- 5 / 5
- Likes
- 88
- Downloads
- 455
- Makes
- 10
- Views
- 1,459
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
This was made to have a very tight fit with the magnet so that glue wouldn't be required. Depending on your magnet manufacturer, you may need to resize the width and height by a tenth of a millimeter or so.
I printed with 0.20mm layer high, no supports, but a slow first layer (20% speed) to ensure good adhesion.