Search results: pushpin

Counting matching models…

Printables

Just giant pushpin

Just a giant pushpin. You can pin it into ground, wall or anything… It is projected to be printed as separate objects and screw them together. Easy mounting. Warning! Dont stab people! It makes stabbed people…

Order a print of this model

Printables

Cat Butt Pushpin Holder - 3D Printable STL File

Upgrade your workspace with this Cat Butt Pushpin Holder Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print Guide with tested settings **Specifications:** - Dimensions:…

Order a print of this model

Printables

Model Sword Wall Mount - Pushpin

I printed out an amazing Kingdom Come sword model and wanted to hang it on the wall in my office. Created a quick and easy piece to that I could use a few push pins to hold it up. Non printed parts: You will need 4 pushpins. The larger…

Order a print of this model

Printables

Bulletin Board Pushpin Dish

This pushpin dish is designed to attach to your bulletin board using four standard pushpins. Not much else to say - download and enjoy!

Order a print of this model

Printables

Thumbtack / Pushpin with filament insert as pin

This is a simple thumbtack/pushpin design where the pin part is a piece of filament to provide adequate strength for multiple uses. I found this design works best for me taking longevity and ease of printing into account. Filament insert…

Order a print of this model

Printables

Scythe heatsink pushpin replacement intel retention (Shuriken , Katana, and others)

My scythe shuriken rev.B has one push pin broken, and other two that not hold very tight, the push pin system is specially a pain in small cases without any space to action and twist the pins I make this for completelly replacement. Hole…

Order a print of this model

Printables

5 SECOND INSTALL PUSHPINS for: " Creality K1 - Improved side fan silencer and protector" by JEng

push into the fan, then push the fan into place. one and done. face down, no supports, small layers preffered. 10 min avg print time for 3

Order a print of this model

Printables

Pushpin Box for Corkboard

A simple holder for your pushpins. There are 5 holes at the top to use to make it as secure as you want (only 2 are used in the picture) and there are a further 2 holes at the bottom in the pushpin area to secure the bottom of the box too…

Order a print of this model

Printables

Pushpin Magnet

A holder for some magnets I had laying around. Should accept magnets 6mm x 3mm

Order a print of this model

Printables

Just giant pushpin

Order a print of this model

Printables

Cat Butt Pushpin Holder - 3D Printable STL File

Order a print of this model

Printables

Magnetic Pushpin/Thumbtack

This is a simple design for a pushpin/thumbtack sized magnet. These are great for magnetic whiteboards, kitchen fridges, office areas, and more. You can buy the magnets on Amazon using the links below. There are 4 sizes so you can fit…

Order a print of this model

Printables

90 Degree LED Strip Clip - Thumbtack or Pushpin mount

Wanted to mount LED strip behind my dressers to light up the wall. Designed for RGBW Waterproof LED Strip, made for thumbtacks with plastic heads. should work as is for most waterproof strips. 3mm between the two fingers, which are 11.5mm…

Order a print of this model

Printables

Magentic Pushpins

Magentic pushpins are small and handy tools used to hold papers or notes in place on metal surfaces such as whiteboards, bulletin boards, or fridges. They come in two different sizes, each designed to accommodate different magnet sizes…

Order a print of this model

Printables

Ikea Skadis Pushpin Mount

Used to hang anything that can be hung on a pushpin or screwhead on your Ikea Skadis.

Order a print of this model

Printables

Pushpin/Thumbtack shelf

This is a shelf I made to fit thumbtacks with a base of 9mm and a length of 22mm from the end of the base to the tip. I printed with 10% infill and mostly base cura settings and holds really well. The first model, I have made

Order a print of this model

Printables

Corkboard/Corkwall shelf. Using regular pushpins.

Hi! i designed this small shelf to hang on our corkwall. It uses 3 pushpins to pin into the cork. The holes are designed for the pushpins to have a snug fit so you might want to turn them to get them in. The shelf prints whitout supports.

Order a print of this model

Printables

Pushpin Decorations

These are multi-color prints of a flower and butterfly to convert standard pushpins into functional decorations. The colors change by layer so manual filament swapping can be used instead of automatic. For the butterfly version, there is…

Order a print of this model

Printables

Pushpin/Thumbtack Magnet

I remixed this to give it strength, and an added benefit of allowing for support free printing. I printed it with 4 perimeters to help with the strength as well. I only altered the model that uses 6x3 magnets, since that is the magnet I…

Order a print of this model

Printables

OpenSCAD Parametric Pushpins

Parameters are diam (diameter), cones 0 or 1 (ball or teeth), cone_cnt. Length is automatic. To create just outer or inner, comment out one of the last 2 lines (push and pin). No supports needed.

Order a print of this model

Printables

Store Your Pushpins Where They're Needed

We recently moved and downsized dramatically so I am constantly thinking of using space more efficiently. We installed a bulletin board and I wanted the pushpins to be placed where they are used and thus easy to find. So I designed this…

Order a print of this model

Printables

Funko Pop Pushpin Shelf - Logo Remix

Added an embossed Pop and Funko logo.

Order a print of this model

Printables

Giant Pushpin wall hook/hanger.

My wife wanted a place to hang scarves, sweaters, and headphones in our home office that looked like giant pushpins in the wall. This was designed and printed in two parts to hide the screw holes and provide a handy little stash box…

Order a print of this model

Printables

Nailable Container For Pushpins

As you can see in the photos, it is a simple container to hold thumbtacks directly on the cork board for easy access. These are its overall dimensions: Print settings Printed in PLA, without rafts or supports, at 0.2 mm resolution and…

Order a print of this model

Printables

remixed it to fit a 11mm diameter pushpin magnet

The push pin dimensions are 11mm wide x 13mm height 11mm base x 5mm height, neck 5mm diameter x 6mm height, top 8mm diameter x 2mm height I didn't realize under after modeling the section that the magnet isn't center with the hook section…

Order a print of this model

Printables

Tac/pushpin dart

This is a push pin/tac dart it requires a 4mm nut for nose weight and a tac and a little bit of glue you print it glue the 4mm nut to the bottom of the tac with a little hot glue or superglue and the put some glue in the darts hole and…

Order a print of this model

Printables

Blow dart from tac/pushpin

This is a powerful blowdart I designed all you need to make it is a tac filament a little hot glue and time to put together put a little bit of hot glue around the tac and put it in the hole in the 3D printed dart and shoot have fun…

Order a print of this model

Printables

pushpin magnet 11mm diameter

Included the insert that can be placed without supports

Order a print of this model

Printables

Headphone Holder - Pushpin Version

Fully printable version without need for support. The holes are a bit bigger than an actual pushpin point, which was done given that holes on the base plate can shrink.

Order a print of this model

Printables

MultiBoard Pushpins

Pushpins are great for holding items on a MultiBoard. For instance, pushpins make attaching and moving MultiBoard Parametric Labels simple and easy. Pushpins come in two styles: Flat head pushpins are a little harder to get out but are…

Order a print of this model