1 / 3
90 Degree LED Strip Clip - Thumbtack or Pushpin mount — image 1
1 / 3

90 Degree LED Strip Clip - Thumbtack or Pushpin mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Mount LED strips with Thumbtacks

Rating
0 / 5
Likes
14
Downloads
91
Makes
0
Views
461
Reviews
0

Updated at source:

Model information

Category
Home Decor
License
Creative Commons — Attribution — Noncommercial — Share Alike

Wanted to mount LED strip behind my dressers to light up the wall.

Designed for RGBW Waterproof LED Strip, made for thumbtacks with plastic heads. should work as is for most waterproof strips.

3mm between the two fingers, which are 11.5mm long.
Diameter of hole for pin is 1.4mm, indent for the head is 8.2mm.

Optimized to print at 0.45mm extrusion width with 2 perimeters, results in a solid plastic piece. Takes approximately 9 minutes to print a one, 2 units take 17 minutes, 3 units take 19 minutes, printing more than 4 at a time is most efficient, results in print time of 5.25-5.3 minutes per unit, print time is linear above 4 units.

Print on it's side. If you would like it modified to your required dimensions or shape, leave a comment, or send me a message.