1 / 13
Tac/pushpin dart
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a dart made out of a tac and a 4mm screw and of course the 3d printed dart shell have fun.
- Rating
- 4.333 / 5
- Likes
- 24
- Downloads
- 78
- Makes
- 2
- Views
- 511
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial
This is a push pin/tac dart it requires a 4mm nut for nose weight and a tac and a little bit of glue you print it glue the 4mm nut to the bottom of the tac with a little hot glue or superglue and the put some glue in the darts hole and then put the tac in and you are done (you can look at the photos for reference) good job and for a target you can use a cardboard box or some thin plywood or basswood happy printing.