Counting matching models…
✔ For more sculpts like this, and if you are able to support my artwork, take a look at my Patreon :) Dun Dun Dun dun DUN Dun dun DUN Dun... Now, everyone, stop requesting Darth Vader! He's here! Print him! Be happy! My first memory of…
Stampato in PETG con un riempimento maggiore dell'originale
I was looking for a better storage solution for my short Nerf darts and when I could not find something that fit what I was looking for I decided to create my own. This is Nerf Short dart storage for worker gen 3 short darts. the…
This… is the result of a 1:00am study session, three sleep-deprived students and a sharpie. what started as a doodle of a “hedgehog blaster" became this X-shot micro reskin that for some reason a lot of people loved. maybe because its…
This 3D-printed dart holder is a sleek and practical solution for keeping your darts organized and secure. It features 12 holes, each 8.8 mm in diameter and 50 mm deep, providing perfect storage for your darts. Additionally, it includes a…
Update (--> for Breacher & Battle Axe) --------------------------------------------- Silly Shell with 3x airtight Elite barrels 6x Short Darts / 3x Elite Darts / 18 caliber .50 foam balls Update 30.9.2025: Modified shell, suitable for…
My M1887 dart blaster didn't come with a bird's head grip, but rather with a not-so-convincing stock. I drew up a printable version. It doesn't fit the curvature exactly, but is still comfortable to hold none-the-less and gives a nicer…
No additional hardware is needed, it's a simple drop in replacement. Supports shouldn't be required either if you have good overhangs. .step file includes both variations including one that wasn't cut for half darts and has no fillets or…
Update ---> alternative slim versions with smaller outer diameter --------------------------------------------------------------------- Auto Feeding Inline Clip (3x Short Darts) Optimized dart storage diameter and barrel diameter to…
A foregrip for the Dart Zone Venom that holds a mag
Just took the picatinny you screw on, modified it a bit, and slapped it on top of the mount. You'll probably want to use supports now. @
Pick up darts by wedging them between the fork prongs. Can collect 3x7 darts in one run. You will need a ½ x24" inch dowel rod from any craft store (with option to use 16mm barrels too). The bore for inserting the dowels are meant to be a…
This remix exists to cut down the N1 darts to a size more similar to the average short dart, i did this to try and increase the compatibility with 3d printed mags and especially with stringers like the ones from Leedle Dynamics. The darts…
Ich habe mir Dart flight halter gedruckt auf grund das sie immer wieder nicht im rechten winkel waren und ich somit ein besseres Spiel habe gedruckt wurden sie mit Pla müssen ja nichts großes halten und 15% infill
This is a logo to print in White and glue on the camera cover for Darts Camera and LED Ring mount by 3DEngelen.
Der Halter bietet Platz für 21 Darts. In der Schublade kann man Ersatzteile wie Spitzen, Schäfte und Flights unterbringen. So hat man alles an einem Ort und ist sofort griffbereit. Die Schublade hat einen flachen Boden, sodass man sie…
This is a drop in barrel replacement for the Dart zone solo pro, that allows the addition of a longer metal barrel and/or the addition of and 16mm OD barrel accessories. Simple, straightforward design that just works. This was made via a…
Darth Vader bead for hoodie, trainers... printed with hole 6mm wide check out my other Star Wars bead collection https://www.printables.com/model/1237878-stormtrooper-bead https://www.printables.com/model/1239268-r2d2-bead…
Hello everyone! This is a four dart capacity short dart/talon style magazine designed to work specifically with my Springer Rayven blaster. One of the main goals of the springer Rayven project was to keep the Rayven looking as original as…
I took apart a Darth Vader candy dispenser and wired it up to an Adafruit FX sound board, battery, power switch and dip switches for a larger variety of sounds. And it still dispenses candy. The sound board:…
Die Neuauflage von B3D-Autodarts-Automatic-Score System ist nun endlich verfügbar. Automatische Darterkennung? Mit Autodarts & Co. Kein Problem. Aber wie oder was erkennt die Darts? Dafür benötigen sie zbsp. Solch ein Set, um Kameras…
I took down lanka on etsy due to being just a bit too outdated and the new terms of service on etsy no longer allowing me to have more realistic shapes, so i decided to throw it on here.
Sliced the model to fit the printbed of 18x18x18cm. Remember to print the pin horizontally on the bed, otherwise it will be too weak and snap easily.
Silly Shell – 4x MEGA Dart (for Anemone, Wildstyle, barrel launcher attachments, etc.) I combined a Silly Shell with air duct dart posts to shoot multiple MEGA Darts simultaneously with good performance. Minimized dead space through air…
Updated Version 1.1 9x Short Darts ----- Silly Shell ----- with 3x airtight barrels 9x Short Darts (3x3) or 27x caliber .50 Foam Balls + Loading Tool with 3 ramrods for fast and easy loading. I added 3 separate airtight barrels to a silly…
12x Short Darts ----- Silly Shell ----- with 3x airtight barrels 12x Short Darts (3x4) or 36x caliber .50 Foam Balls + Loading Tool with 3 ramrods for fast and easy loading. I added 3 separate airtight barrels to a silly shell for better…
Reconfigure your Nerf Pro Torrent! [Scroll to the bottom for updated parts and changelogs] I am a big fan of the Nerf Pro Torrent; but know that it may not be to everyone’s liking. I am incredibly excited to introduce my latest project -…
Blocky Iron Sights (combined in one piece) -- Barnacle for foam dart blasters with picatinny rail. I made these low profile, blocky style and clearly visible iron sights for my Barnacle. It's a bit of a loose fit at my Barnacle (but it's…
I hope you like my model and appreciate my work. Thank you for your support, likes, shares, downloads, reviews, and photos of your prints. If you have any questions, please don't hesitate to contact me. Print at 100% infill with a layer…
Once loaded into slicer, just paint as required! No supports needed See my profile for other bar signs for your mancave!
The Foam Comb (Fomb) is a simple printable tool for picking up nearly any dart type no matter their orientation! No need to aim, simply stab the ground with the Fomb to pick up darts and use the bucket fork to offload! The only…
3 February 2026 Added 10 row variant to include 'doubles', 'triples' and 'beds' or numbers down to 12. ================================================================================ I designed this scoreboard to keep track of scores in…
______________________________________________________________________________________________________________________________ Main features: Half length dart compatible K25/K26 spring powered Real steel-esque proportions Working…
A remixed version of the Mighty Shrub "Ex" BCAR Front End for use with the standard Worker plastic SCAR
Stanly Becher Fahrrad Halter 65mm Standard Bohrung Abstand
A whistling Nerf dart I made when I saw a nerf dart someone else made. But it had no seal so here I am with a prototype I used off a picture on his model. I would suggest you use this is metal barrels. (His model here, although I think it…
Full Image Catalog The complete gallery of my works can be found at Portfolio. You can search by the file’s reference number or simply click the preview image to open it directly. This chibi Darth Maul model captures the fierce and…
Full Image Catalog The complete gallery of my works can be found at Portfolio. You can search by the file’s reference number or simply click the preview image to open it directly. This Darth Vader model shows the iconic Sith Lord holding…
made a set of my own darts. Had to design some flights. Drawn from original Jarts. Wings are a little thicker than the original by .020" for strength. Inner diameter is .300" outer diameter is .500" wings are .060" thick
4/19/2026 UPDATE: Replaced all files for updates with a single 3mf. My original model was simply a non-working display and I had fun developing it.…
Changelog: 11/03/2025 - Fixed priming bars missing from part drawings pdf. Changelog: 02/21/2026 - Added hw kit suppliers for asia What is this? The Stagecoach Side By Side is a 3D printed nerf blaster that fires and ejects Sillyshells ,…
This is a printed follower that'll hopefully allow for dart sensing for the HC Vesper. I just took an image from the listing off of M416 Gel Blasters and based the magnet position off that and copied a follower from a Diana magazine. It…
Model is print oriented. Support and 25% infill or higher recommended. Tube Stock https://www.printables.com/model/1508851-dart-zone-vector-pro-hammer-kit More Vector Compatible Accessories…
Thanks for supporting me over the years! Files are now free for personal use. Consider buying me an ice cream or something :) @ https://ko-fi.com/palmtopper Files for the Tacticool Aeon Kit. Take your Aeon to the next level! Add a stock,…
Thanks for supporting me over the years! Files are now free for personal use. Consider buying me an ice cream or something :) @ https://ko-fi.com/palmtopper Cutting darts has never been so fast! Just insert, cut, flick the ends off, then…
Made myself some blowguns, now I need some darts, with this and some BBQ sticks, I have more than enough. Since my blowguns and sticks are quite random, and different filaments are not that easy to match precisely, I made all the variants…
This is a simple re-shell for an X-Shot Menace that is supposed to look like a Nerf Nite Finder. Prints with no supports. The tip threads onto the body. Holds 2 extra darts below the barrel,. I believe there can be some different…
Just some nerf dart tips :) Print settings: layer height: 0.1mm - 0.4mm line width: 0.3mm - 0.6mm wall line count: 2 - 4 top/bottom layers: 3 - 4 infill density: 5 - 30 percent infill patern: cubic filament type: PET-G (recommended),…
Weird Enough! Print in place, no assembly, no glue, no support and less purge! No CFS AMS 3MMU required (different h-sizes, separated parts). Play with heights to add shades if you are using transparent filament! Personal use only,…
2 axis controllable nerf turret This project is super fun but be prepared to put in some effort. I used a raspberry pi pico and an odroid-xu4 but you can use whatever you would like I have attached all the files you may need to change to…
YOU WILL NEED THE KIT TO BUILD THIS: USA: Bearswares: https://bearswares.shop/products/vulture-mk3-by-mhp-arms?variant=42951208534129 Out of Darts: https://outofdarts.com/products/mhp-vulture-lever-action-springer-hardware-kit AUS:…
An Display to show of your darts and original box. It fits at least for the standard target cardbord box. Edit: More versions for Harrows, Winmau, Unicorn etc. cardbord boxes. More to follow. Maybe you have to repoke the tiny holes für…
Screws are not required, but the tension is still better with the old version! https://hing-yip.com/
Bring the power of the Dark Side to your collection! This is a highly detailed bust of the most iconic villain in cinematic history – Darth Vader . This model has been carefully crafted for Star Wars fans and 3D printing enthusiasts who…
Nachdem ich für einen Freund die Kamerahalterungen für den Target Corona Vision gemacht habe, wollte ich das Autodartserlebnis auch genießen. Da der Corana Vision an sich sehr weich ist, der LED-Streifen in den Kameras blendet und ich…
Remix of the non-angled magnetic holster mount for the Gecko to work with Midlock/medium Fidlock
Model slouží jako světelné okruží k terči na šipky. Pro magnety 10x3
This Darth Vader book nook is a striking sci-fi decor piece designed to transform your bookshelf into a cinematic scene. The figure appears emerging from a doorway, frozen in a dramatic moment, creating depth and visual intrigue between…
Распечатывать в той позиции,в которой они изначально позиционируются.Печатал PetG 30 процентов заполнения,думаю можно печатать и с меньшим заполнением.После печати объемного инструмента,большого,вкрутить длиный саморез и вытащить…
Included Files: Body Left Side Body Right Side ALternative Body Right Side for usage of 5x M3x6mm Heat Inserts and 5xM3x6mm Screws ScrewOn Barrel Ring ScrewOn HalfDart 2x Inline Clip Barrel ScrewOn HalfDart 3x Inline Clip Barrel Top Slide…
a connector to allow the overheat drum to be used with the venom max pro blaster from Dart zone
English: Bluetooth Macropad for Autodarts (12 Keys) Tired of walking back to your computer after every set? Elevate your game with this DIY 12-key Macropad , specifically designed for the Autodarts ecosystem. Key Features: True Wireless:…
This is my number ring for a dartboard in the Tor Edition. I hope you like it. Here are the dimensions: Outer diamter: 447mm Joint tolerance: 0.05mm Height of the numbers: 0.01mm Has bevels (Fasen) for easy fitting Just select the Color…
Leap into Color with the Poison Dart Frog Figure! 🐸🌿🌈 Small, bold, and impossible to ignore, the Poison Dart Frog hops into our brand-new Jungle Animals collection with vibrant energy and playful charm. Inspired by the striking colors of…
A good way to hold extra nerf darts. each segment holds 10 darts and can rotate up to 45 degrees on each side. Also has a break to is to keep the pin from sliding out.
Simple darts caddy to store your darts. No MMU required. Print Order: start with WHITE swap to GREEN at layer 25 (5.0mm) swap to RED at layer 27 (5.40mm) swap to BLACK at layer 29 (5.80mm)
Low profile cable management clip for your dartboard. You can organize up to 6 cables.
La imagen con un diseño estilo "Chibi" o caricaturizado (cabezón y pequeño), El casco y la máscara negra: Su rasgo más distintivo. El sable de luz rojo: El arma característica de los Sith. La armadura y capa: Incluyendo el panel de…
Darth Maul, uno de los villanos más icónicos de la saga Star Wars. Apareció por primera vez en Star Wars: Episodio I - La amenaza fantasma y se reconoce fácilmente por: Raza Zabrak: Sus característicos cuernos en la cabeza. Tatuajes Sith:…
These models are intended for decorative and display purposes and can be freely scaled or customized for personal projects. 📃 Usage & Licensing 🔹 Personal Use: You may print and display this model for your own enjoyment. 🔒 Commercial Use…
Case for 3 darts, use hairtie, or rubber band to secure darts inside. Fits darts up to 167mm, even with K-flex flights.
If you print them place supports like in the last photo, else the print will fail. Enjoy your Airsoft Darts
All my models are free. Due to banking restrictions in my country, I’m unable to sell models directly. If you’d like to support my work, you can do so on Patreon. https://www.patreon.com/15369015/join
Darthalter mit personalisierbaren Text Flexible Anpassung und passen sie ihr Text für ihren Flight an. Ideal für eine Sammlung oder nur als Halterung
Kabelclip für das DIY Autodarts Set von Robbel. Ich wollte den Stecker von meinem LED Strip nicht umlöten weshalb ich mir diesen kleinen Clip erstellt habe.
FPS Optimized Rear Loading Shell ---> for Short Dart + Elite Dart for the X-Shot Excel Ejector Shell Blaster Load short darts into the shell without ramrod due to rear loading. Easy loading of the shells due to the optional loading tray…
Overview: Super Low Hardware High performance due to long draw Different versions for longer or shorter layouts Included Iron sights and grip to help you prime Single shot breech loader - Can take full length darts (Please be aware that…
Suppressor For Dart Zone max Dictator I used Pet-g pretty good If it doesn't work your nerf gun is making noise from spring oil and not good sealant so apply lube. gd luck twin
A durable and practical belt holder designed for a custom Darth Vader lightsaber. The model allows you to securely attach your saber to your belt during cosplay events, conventions, or display use. The geometry is optimized for strength…
Ein variabel zu befestigender Griff, um lange Tage mit der Legeflinte angenehmer zu machen! Sehr stabil entworfen, es werden zum verbinden von Griff und Schale noch vier M6 x 35mm Sechskant Schrauben benötigt. Zum drucken die Schale auf…
This part is a replacement part for the Dart Zone Stryker/Nexus Pro. I have tested it.
