Magnetic Socket Toolbox Organizer Quarter Inch 1\4"
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.09 – €0.12 net (excluding VAT)
For file: 1-4_Socket_Insert_0.2mm_PLA_MINI_7m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.11 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 7.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Toolbox socket organizers for 1\4" sockets with magnets to hold the organizers in place.
- Rating
- 4.333 / 5
- Likes
- 186
- Downloads
- 590
- Makes
- 3
- Views
- 8,143
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
Toolbox socket organizer for 1\4 inch sockets. The base is designed to accept a 10x3mm magnet as the base is printed at a .2 layer height. I printed all of these on a Creality CR-10S and placed a M25 pause between layer 16 and 17 in order to put the magnet in the base while it is printing. I printed 9 bases at a time with them spaced out across the build plate to make sure the magnets didn't jump out of place.
Once the base and insert are printed, I used hot glue to put them together. I'm sure super glue or gloop, etc. would work as well. I also printed the insert in a bright color to make it easy to spot a missing socket. I used green for metric and white for SAE.
The spacer allows for additional room between the sockets for the larger ones.
The attached gcode files were sliced in PrusaSlicer for a Prusa Mini but were not tested and do not have a pause to allow for the magnet to be inserted.
3/8" and ½" also available in my other models.