Sovol SV07 adjustable magnetic probe holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Magnetic probe holder for the SV07 to allow the height of the probe to be adjusted according to the length of the hotend
- Rating
- 5 / 5
- Likes
- 19
- Downloads
- 153
- Makes
- 2
- Views
- 959
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The original magnetic probe holder for Sovol SV07 and SV07+ printers does not allow the height of the probe to be changed.
I've therefore designed a replacement part that allows this height to be adjusted, so that longer hotend assemblies or nozzle can be used.
For best results, I advise you to print the model in vertical orientation, on the pierced upper side:
- Layer height 0.2mm
- Filling 15% minimum, gyroid
Use the original screws to fix the support to the hotend and add an M3x6 screw to maintain the probe height.
The notch printed on the side allows you to set the height for the original hotend.