1 / 8
Wago 221-420-to-Breadboard Box for 1-Wire, ESP8266, ESP32, Homeassistant etc. — image 1
1 / 8

Wago 221-420-to-Breadboard Box for 1-Wire, ESP8266, ESP32, Homeassistant etc.

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Compact box for organizing sensor wiring via Wago 221-420 and a breadboard, ideal for ESP8266/ESP32 IoT/1-wire projects.

Rating
0 / 5
Likes
23
Downloads
89
Makes
0
Views
712
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial

Connection Box for Wago 221-420 to Breadboard – Sensor Integration

This enclosure provides a clean and robust interface for routing multiple sensors via three Wago 221-420 (10-slot) connectors into a 400-pin breadboard (84 × 55 × 8.3 mm). Signals can be routed directly to ESP8266, ESP32, or similar IoT controllers for Home Assistant, MQTT, Node-RED, or custom automation.


For example, up to nine DS18B20 sensors can operate on a single 1-Wire bus without a dedicated PCB or additional terminal blocks.

Printability & Assembly

  • Optimized for support-free printing on standard FDM printers
  • Standard print settings; PLA, PETG, or ABS depending on application
  • Lid mounts with 2× M4 screws; M4 nuts snap in from inside
  • Use pan-head screws & standard nuts only (no locking nuts)
  • Optional: TPU filament as a gasket for additional sealing

Required Parts

  • 3× Wago 221-420 connectors
  • 1× 400-pin breadboard (84 × 55 × 8.3 mm)
  • Electronic module of choice (photos show Wemos D1 Mini ESP8266)
  • TPU-Filament as gasket
  • 2× M4 screws
  • 2× M4 nuts

Ideal For

  • Home Assistant sensor hubs
  • Temperature monitoring networks
  • Sensor distribution nodes
  • Control cabinet integration
  • Prototyping and development
  • Technical training and IoT education

Optional Customizations

  • Use different sensors: Simply add or remove holes in the box via your slicer.
  • Adjust for different breadboards: If your breadboard doesn’t fit, split the box in your slicer into a front part, back part, and middle strip. You can then scale the middle strip to the required length before printing.
  • Secure sensors: Use cable ties to fix sensor wires neatly inside the box.

Tags