Wago 221-420-to-Breadboard Box for 1-Wire, ESP8266, ESP32, Homeassistant etc.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
5,44 € – 6,65 € netto (bez VAT)
Dla pliku: File_0.4n_0.2mm_PLA_COREONE_3h23m.bgcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 6,04 € netto (środek widełek).
- Masa podana przez autora
- 131 g
- Czas druku podany przez autora
- 3,39 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Compact box for organizing sensor wiring via Wago 221-420 and a breadboard, ideal for ESP8266/ESP32 IoT/1-wire projects.
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 89
- Wydruki
- 0
- Wyświetlenia
- 712
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Connection Box for Wago 221-420 to Breadboard – Sensor Integration
This enclosure provides a clean and robust interface for routing multiple sensors via three Wago 221-420 (10-slot) connectors into a 400-pin breadboard (84 × 55 × 8.3 mm). Signals can be routed directly to ESP8266, ESP32, or similar IoT controllers for Home Assistant, MQTT, Node-RED, or custom automation.
For example, up to nine DS18B20 sensors can operate on a single 1-Wire bus without a dedicated PCB or additional terminal blocks.
Printability & Assembly
- Optimized for support-free printing on standard FDM printers
- Standard print settings; PLA, PETG, or ABS depending on application
- Lid mounts with 2× M4 screws; M4 nuts snap in from inside
- Use pan-head screws & standard nuts only (no locking nuts)
- Optional: TPU filament as a gasket for additional sealing
Required Parts
- 3× Wago 221-420 connectors
- 1× 400-pin breadboard (84 × 55 × 8.3 mm)
- Electronic module of choice (photos show Wemos D1 Mini ESP8266)
- TPU-Filament as gasket
- 2× M4 screws
- 2× M4 nuts
Ideal For
- Home Assistant sensor hubs
- Temperature monitoring networks
- Sensor distribution nodes
- Control cabinet integration
- Prototyping and development
- Technical training and IoT education
Optional Customizations
- Use different sensors: Simply add or remove holes in the box via your slicer.
- Adjust for different breadboards: If your breadboard doesn’t fit, split the box in your slicer into a front part, back part, and middle strip. You can then scale the middle strip to the required length before printing.
- Secure sensors: Use cable ties to fix sensor wires neatly inside the box.