Onefinity Elite Masso Stepper Motor Wire Cover
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.67 – €2.05 net (excluding VAT)
For file: Onefinity_Elite_Stepper_Motor_Wire_Cover_50mm_0.2mm_PETG_MK3S_2h10m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.86 excluding VAT (range midpoint).
- Weight reported by the author
- 18 g
- Print time reported by the author
- 2.17 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
STL Designed for Onefinity Elite Masso Stepper Motor. Can be printed in different wing size.
- Rating
- 5 / 5
- Likes
- 26
- Downloads
- 169
- Makes
- 3
- Views
- 746
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Digital File to DIY 3D print (Cover).
5 x STL model files included for different wing size (0mm, 30mm, 50mm, 60mm, 70mm).
1 x 3MF model file (prusa slicer)
Installation:
I used original masso cover screw. Each screw is long enough.
Wire can be run on either side or at bottom if desired.
Print settings:
- Nozzle diameter: 0.4mm
- 0.20 mm DETAIL
- Filament: PETG
- Print face down
- Print without support
**NOT FOR RESELL**
If you download and/or add this model to your collections, please click the LIKE button.
Thanks