Counting matching models…
Does NOT work with the Scimitar RGB as it has different layout for the main buttons and screws. Unfortunately, without buying one I cannot make a model specifically for that one. It works with Scimitar RGB Elite, and should work with…
HP Elite/Prodesk mini (G3/4/5, possibly later) 10" 1U rack mount with 2 keystone slots. 250mm wide faceplate.
Filament Dryer conversion of Elite Gourmet EFD319 Food Dehydrator. The tolerances are a bit lose use the trays as guide
Angles 4 elite dart chambers outwards and separates their chambers to reduce air leakage. Pinches darts so don't leave them loaded. Print with support on the inner separator. 5-21-25: added variant with a central supporting pillar to help…
This is a simple, easy-to-mount PSU holder designed for the CSL Elite wheelbase power supply. It fits PSUs with a length of around 190 mm and a height of around 42 mm . The design allows you to simply slide the PSU into place — no screws…
The stick attaches to the adapter using magnets and friction. All you need are two 4x2mm magnets, which you glue on with superglue. The adapter is designed for first-generation Xbox Elite sticks, not second-generation ones.
The original design did not fit the HP Eliteone 800 G2 AIO. Even though at first glance it looks compatible. The diameter on the base is different. I'm not sure what other models use this smaller size, but I'm sure it's not a once off.…
Two body wall mount holds the Xbox Elite controller and charging mount using the Xbox USB charging cable. Headset mounts below hiding mounting screw under the shelf. Text can be removed by separating the objects.
Yet another 3x shell. Unlike many versions with separate chambers, this one keeps the chambers together so you don't have inconsistent performance between darts when all the pressure escapes before every dart exits, as well as slightly…
Revisited the 5x shell and made it easier to print (no supports) and strengthens the dubious pillar in the middle by connecting it to the rest of the walls while fitting 10 half darts flush (even 38mm ones). Fires out of the goblin but…
Feet for the original Optima Elite (not the later styles like the Elite 3). Material/Filament: - Designed to be printed in TPU. Best results for 70A-75A with 100% infill, higher hardness TPU will require less infill to be soft enough. If…
Spacebar bump stop for the original Optima Elite (not the later styles like the Elite 3). Material/Filament: - Designed to be printed in TPU. Best results for 70A-75A with 100% infill, higher hardness TPU will require less infill to be…
Français Pack de 3 socles différents pour l’ AKASO V50 Elite , modélisés à partir de ma maquette 3D (le dummy que j’ai uploadé avant). Tout est conçu pour être solide, léger et hyper pratique. Les 3 versions : 1. Socle classique → pose…
WIP - Ongoing design of control panels for my Elite Dangerous SimPit build. Currently all buttons and switches are connected via a USB arcade encoder and directly mapped in-game. This will likely convert to something Arduino based in the…
i'm pretty sure this is the maximum amount of elite darts that can fit inside a standard silly shell. The portion of the shell in which the darts are held starts at 10mm and ends at 80mm so two 35mm darts will be able to sit flush with…
Dieses Modell ist mehrteilig, damit weniger Stützmaterial benötigt wird. Neu (April 26): Längere Version für 56er Rahmengröße This model is multi-part, so less support material is needed. New (April 26): Longer version for 56cm frame size
This is the 2026 update of my Enclosure design for the Ultimate series (C6U/ Ultimate Elite 2) User port expansion. (Black or White PCB) It attaches directly to the Tape port for a nice clean look. I would very much like to thank @FrankWL…
To have your Dummy 13 hold the Bloodblade, simply insert the blade with the handle into your dummy's hand, then, while it's there, insert the leftover bit of handle into the hole of the other blade.
This is the 2026 update of my enclosure design for the Ultimate series (C6U/Ultimate Elite 2) User Port expansion. (Black or White PCB) I also took the opportunity to redesign the mounting mechanism. The previous version could come loose…
This adapter kit is used to attach bicycles to Elite Direct Drive trainers. My original adapter was broken, so I replaced it by this one. Compatibility: Elite Direto XR (my trainer) Should be also compatible with: Elite Suito Elite…
I printed it with 7 wall loops and a line width of 0.5mm and an infill of 50% in PETG. You have to unscrew the three original rubber inserts before inserting. I printed 4 of the original feet and added this one to stablelize the feet.…
This is a remix of Pizza42s extracted model. It has been refined and made solid in FreeCad and is printable. There are still some mesh issues on the hardpoints, landing gear, and fighter bay, but it is workable.
A rough mockup of the Unihertz Titan 2 Elite. Dimensions should be accurate, though the side button placement had to be eyeballed due to no reference images being available. Unihertz has also not shown the rear of the device at this time,…
Needed a place for 4 elitedesk psu's in a 10 in mini rack.. Noticed that the bottom of the rack had an additional .5 u so I took advantage of that and made this mount.. There is also space for the cable slack beside each holder.
This was designed to replace my old model. This design in more durable, better looking, and fully customizable. Throwing out old things that work is dumb, and I've seen at least 5 of these cases being sold used specifically because of the…
Monture de remplacement pour Mantis Elite Version 2 Reference fabriquant 202-B0445 Vision Engineering Cette pièce est une substitution au modèle d'origine. Paramètres d’impression 3D : Impression facile avec support (voir images), en PETG…
I've created adapters to fit the exchangeable joystick tops of xbox elite controllers to the ROG xbox ally. The interfaces for xbox elite series 1 and series 2 controllers are different, please print the version fitting for your…
New muzzle with feed ramps to make it easier for young children to load darts. Just unscrew the clamshell and swap out the original part. Prints without supports (face down) The rear sight requires the nub on the clamshell to be trimmed…
This is somewhat of a proof of concept, because I don't know if this will work with every C64 enclosure. It relies on a tiny gap between the metal expansion port cover and the enclosure. I've included a test model that you can print to…
It's just a simple redesign of the original to meet my requirements.
FPS Optimized Rear Loading Shell ---> for Short Dart + Elite Dart for the X-Shot Excel Ejector Shell Blaster Load short darts into the shell without ramrod due to rear loading. Easy loading of the shells due to the optional loading tray…
Deploy overwhelming firepower with this Elite Power Armour Shock Trooper . Encased in bulky, battle-scarred powered armour, this futuristic soldier grips a heavy assault rifle designed for frontline dominance. The reinforced shoulder…
Rule through fear and conquest with the Warlord of the Skull Throne . Seated upon a brutal throne forged from blades and piled skulls, this grimdark conqueror radiates dominance. Armoured in heavy gothic plate and gripping a longsword…
Bring disciplined frontline power to your tabletop with this heavily armoured spear warrior miniature. Clad in full plate armour with bold red accents, this elite infantry figure stands ready with a long spear and reinforced shield,…
To secure the computer to the mount, you need two M4x6mm screws. There are options for 2 couplers, 1 coupler, or no couplers. The model can be accessed on OnShape here .
Always check where the notch is on the rail and try to match it with the bump inside the accessory. PRINT WITH BRIM IF PRINTING VERTICALLY
Designed this in F360 for my HP Elitedesk 705 G4 Hope you enjoy!
These feet allow for better airflow and raise the keyboard angle slightly. Designed for the x360 1040 G5 with minimal tolerances. Other models might not fit. Use a shock cord to hold both parts together and use some rubber feet to avoid…
If you like this model, don’t forget to check out my other creations in my collection — you might find something else you’ll love 😉 Thank you so much for every download, like, and support. I truly appreciate it! 🖨 Technical Information…
The original model fits perfectly, thank you @tokyo2ooo I added fillets to optimize printability. Additionally I made the model 120mm long to fit my needs. I recommend printing the holder upright with a lot of walls for best results.
I modified the original version so it doesnt block as much of the notebooks air outlet
This is what I would define as a function modification as it is what I consider a very unpolished piece of 3d printed hardware. That said I did make the adjustments by hand to fit the following adapter so it doesn't directly collide with…
Turn the FRAME Series ELITE Motherboard Tray into an open test bench with this set of 3D printed parts. Featuring a mount for a 120mm fan for rear board cooling, support for reverse motherboard connectors and a triple slot GPU mount…
Design Concept The model represents a powerful warrior from the Halo universe, showcasing intricate details and a dynamic pose. ## Purpose Ideal for collectors and fans of the franchise, this figure serves as a display piece or part of a…
About Elite Liquid Elevate your build with a perfect blend of style, performance, and customization. Featuring an exclusive hexagonal, crystal-clear outlook, Elite Liquid 240/360 offers easy personalization with tool-free, adjustable pump…
I designed a custom Minecraft sword cover for the Cooler Master Elite Liquid Series AIO pump using Tinkercad. This was a big challenge for me since I’m still learning 3D modeling, but I put a lot of time and effort into getting it right.…
This is a cover for the Cool Master: Elite Liquid Cooler
make an water tap from your CoolerMaster aio! USE 3MF, PRINT WITH TREE SUPPORTS!
Cpu temps are fine :) normal for bumb on the cooler Seetrough for seeing the light shine trough (recommend!)
I designed a custom iron man cover for the Cooler Master Elite Liquid Series AIO pump using Tinkercad. This was a big challenge for me since I’m still learning 3D modeling, but I put a lot of time and effort into getting it right. Please…
Cooler Master: Elite Liquid custom pump cover Icicles for the coolest performance! your cpu temps are bellow zero with this mod! WARNING! print with supports!
I designed a custom, funny "DANGER" sign cover for the Cooler Master Elite Liquid Series AIO pump using Tinkercad. The design says "DANGER, ULTRA LOW TEMPS (temperatures)," referencing the power of the AIO. This was a big challenge for me…
Custom Pump Cover Collection for Cooler Master Elite Liquid Give your setup a personality boost with this collection of 18 custom pump covers designed specifically for the Cooler Master Elite Liquid series. Whether you are a fan of…
I designed a custom, funny "in case of love" condom holder cover for the Cooler Master Elite Liquid Series AIO pump using Tinkercad. The design says "DANGER, ULTRA LOW TEMPS (temperatures)," referencing the power of the AIO. This was a…
Waveform Liquid Cap A custom pump cap with a textured surface based on a waveform pattern. The vertical pillars create a subtle ripple effect that changes with light and viewing angle. Ideally printed with translucent filament to allow…
Cooler Master Elite Liquid custom pump covers with original logo The Cooler Master logo is not visible from the outside but is visible when the interior light is on I recommend printing the shell with the flat side facing down and,…
I designed a custom Minecraft potion cover for the Cooler Master Elite Liquid Series AIO pump using Tinkercad. This was a big challenge for me since I’m still learning 3D modeling, but I put a lot of time and effort into getting it right.…
Facile à imprimer ! Et encore plus beau avec des surfaces irrégulières sur le pourtour principal (paramètre par défaut). Utilisez du PETG/ASA/PC : pour une meilleure résistance à la chaleur (bien que ce soit sur un système de…
Cooler Master contest! Custom pump cap for the Elite Liquid cooler - Freeze. Recommended settings: PLA 0.15 mm layer height 0,25 - 0,4 nozzle diameter For MMU3 or without.
Wall or under-desk mounting bracket designed for older types of HP's Prodesk and Elitedesk Mini PC's. They have a VESA 100mm attachment on the bottom and this bracket makes use of that. The PC side bracket has a spot for the 65watt power…
Cooler Master: Elite Liquid custom pump covers - CONTEST ENTRY #1 My first entry into the Cooler Master Liquid pump cover contest (and in fact any design contest!) and my 4th upload to Printables - I've been designing for fun for a while…
A cover for the Cool Master Elite Liquid Series, with a decorative fan. Printing It can be printed either all in one go ("Complete.stl"), or separated, which makes removing the supports way easier and allows for a multi-color print, but…
Custom Pump Cover with Smart Screen for Cooler Master Elite Liquid (for 1.28" LCD/ESP32) 🛒 Required Components (BOM): Printed body parts (outer cover and inner mount). 1.28" Round LCD Display (an ESP32-S3 based module with Type-C is…
Original Face Model - "The Stolen Scream" ( https://skfb.ly/6suHD ) by noamgalai is licensed under Creative Commons Attribution ( http://creativecommons.org/licenses/by/4.0/ ). I resculpted the face, trimmed it and merged it with the cap.…
I have done something similar in the past on an older model of cooler, now I present it to you as a new model for the competition. Two files uploaded, one for an idea of how it looks assembled and the other a model to assemble. I use M2…
Trick out your AIO cooler! Print new tall cooler cover with the hex tile pocket and swap in/out different decorative tiles to best fit your build/mood. Feel free to use one of the tiles I created or download and edit the "blank" tile and…
As no STEP file was available, the model was reconstructed on short notice using reverse engineering tools. However, there is a small deviation in the area marked in the image, which should be taken into account during further design…
As no STEP file was available, the model was reconstructed on short notice using reverse engineering tools. The model shows only very minor deviations in the hundredth-of-a-millimeter range. Enjoy working with the model.
This cap for the Cooler Master Elite Liquid Cooler has a holder for a small thermometer on the outer cover of the CPU Assembly I designed this model after this thermometer from Amazon…
A cap featuring the classic "PC Master Race" design. Ideal for multicolor printing. The hair is see-through to let the light from the pump shine through.
this is a custom cover for the Cooler Master competition in the Cooler Master Retro style of the Cooler Master. MMU Style
Very cool Cooler Master: Elite Liquid compatible pump outer cover. Great for keeping you pc cool in style. This is a fan-made model inspired by Prusa. I do not own the rights to the Prusa franchise.
I have been tinkering with Sculpting so I thought i would submit something in to the Cooler Master: Elite Liquid Cover Competition I came up with this Frosty looking Iceberg to add that extra COOL factor to your build, be warned this is…
I have updated Perfect Fabs model to include the camera bump, and adjusted button size/placement to align with latest pictures from unihertz. IMPORTANT! This is based on some rough dimensions/and guess work by originally perfect fab and…
14mm ccw threads for most tracers and suppressors print orientation as it is in the last slide (adapter 45 degrees for strength) I printed it in the Prusa .20 structural setting
Cooler Master: Bee edition - Kryty na Elite Liquid pump (Soutěž)
Elite Liquid Series AIO Pump – Pantheon Edition Give your Cooler Master Elite Liquid AIO a "Timeless" makeover! This custom pump cap is inspired by the iconic architecture of the Pantheon. The design features a miniature architectural…
Gaps 0.1mm You can view the settings for transparent elements in glass “elements.3mf” for PETG. It is better to orient the cover as shown in "cap.3mf" to make the latches stronger
A custom cap for the Cooler Master Elite Liquid Cooling Series Pump.
Here is my idea for this pump cover. I like the aesthetics of the gas mask as it king has a retro vide as in the Fallout games or the Metro series. I hope some gamers will enjoy. All parts should be printable with no support at all as…
Français : Un cache avec le logo de BeamNG.drive pour la pompe Elite Liquid de Cooler Master. English : A cover for the Cooler Master's Elite Liquid Series AIO Pump with the BeamNG.drive's logo.
Added a hot surface symbol. With light from behind it starts to glow. Fully functional. Support is only needed below the clips. I made the sample from Prusament PLA in army green and vanilla white. But PETG should also be fine.…
Use the provided template, or create your own using the blank slide! Please post your variations! I want to see!
I don't have a 3D printer myself! If you print this, please post a 'Make' with a photo. I'd love to see how it turned out!" Just wanted to make a fun optical illusion like cover for Elite liquid cooler. Feel free to add whatever colors or…
It is an Elite liquid series AIO cover.
It is an Elite liquid series AIO cover.
It is an Elite liquid series AIO cover.
It is an Elite liquid series AIO cover.
It is an Elite liquid series AIO cover.
I created this for the Cooler Master AIO cover contest. It's a simple design that looks like a minecraft ore block. There are two versions: One with the full shroud clips included and one that should slip snugly on top of the existing…
This model is made to enter the contest: https://www.printables.com/contest/509-cooler-master-elite-liquid-custom-pump-covers
![Funny DANGER Cooler Master Elite Liquid AIO cover [COMMENT ANY PROBLEMS WITH THE DESIGN!]](https://media.printables.com/media/prints/da81fc40-17d3-412e-9922-913b62b92671/images/12696907_8b58fa68-8ae6-4d6f-a75e-bb7802343dac_4efef572-b8f6-401d-abcc-e64b76cc3b3e/warning.png)
