HP EliteDesk 800 G4 SFF - 3.5" HDD Caddy/Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a toolless caddy/mount for a 3.5 inch HDD in an HP EliteDesk 800 G4 SFF (no additional hardware required).
- Rating
- 5 / 5
- Likes
- 69
- Downloads
- 836
- Makes
- 3
- Views
- 5,064
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
This is a toolless caddy/mount for a 3.5 inch HDD in an HP EliteDesk 800 G4 SFF (no hardware required). This mount should fit almost all 3.5 inch HDD and should also work in other HP EliteDesk and ProDesk computers. It is meant to utilize the existing mounting holes in the chassis of the computer without any modification. Be careful when bending/installing the caddy onto the HDD because the ears are not super strong in order to keep the mount thin enough to fit into the bay.
Print Settings
Printer: BBL P1S
Filament: Overture PETG worked perfect for me (PLA would most likely not flex enough to allow for installation) TPU may work…
Quality: 0.2mm Layer Height
Walls: 3
Infill: 20% Grid
Top/Bottom Layers: 3
Supports: On, Normal(auto)
Print Time: ~45mins


