1 / 3
HP EliteDesk 800 G4 SFF - 3.5" HDD Caddy/Mount — zdjęcie 1
1 / 3

HP EliteDesk 800 G4 SFF - 3.5" HDD Caddy/Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a toolless caddy/mount for a 3.5 inch HDD in an HP EliteDesk 800 G4 SFF (no additional hardware required).

Ocena
5 / 5
Polubienia
69
Pobrania
836
Wydruki
3
Wyświetlenia
5064
Oceny
6

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution

This is a toolless caddy/mount for a 3.5 inch HDD in an HP EliteDesk 800 G4 SFF (no hardware required). This mount should fit almost all 3.5 inch HDD and should also work in other HP EliteDesk and ProDesk computers. It is meant to utilize the existing mounting holes in the chassis of the computer without any modification. Be careful when bending/installing the caddy onto the HDD because the ears are not super strong in order to keep the mount thin enough to fit into the bay.

Print Settings

Printer: BBL P1S

Filament: Overture PETG worked perfect for me (PLA would most likely not flex enough to allow for installation) TPU may work…

Quality: 0.2mm Layer Height

Walls: 3

Infill: 20% Grid

Top/Bottom Layers: 3

Supports: On, Normal(auto)

Print Time: ~45mins

Tagi