1 / 3
HP Elitedesk 800 G1 10 Inch Rack Mount — image 1
1 / 3

HP Elitedesk 800 G1 10 Inch Rack Mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Specific build of my parametric rack for the HP Elitedesk 800 G1.

Rating
0 / 5
Likes
55
Downloads
485
Makes
1
Views
3,305
Reviews
0

Updated at source:

Model information

Category
Computers
License
GNU General Public License v3.0

Print settings:

  • 0.2mm layer height
  • 4+ bottom layers and 5+ top layers
  • 6 perimeters w/ 0.6mm nozzle or 9 perimeters w/ 0.4mm nozzle
  • 10+% infill
  • I used PETG. PLA may work fine, but I was concerned about creep. I have also not tested the latch durability with PLA yet.

Specific build of my parametric rack to work with the HP Elitedesk 800 G1. Sized for a 177mm x 38mm x 175 mm (WxHxD) box. May work for other HP Elitedesk and Prodesk models. 

Note: I found the height in HP documentation was for the front profile and didn't include the raised feet and rubber strips. This model assumes you remove the rubber strips, as this PC is slightly too large for my 1U rack design with the rubber in place. You can see in my pictures I removed them and placed them elsewhere on the underside of the box for safekeeping.

Tags