1 / 3
HP Elitedesk 800 G1 10 Inch Rack Mount — zdjęcie 1
1 / 3

HP Elitedesk 800 G1 10 Inch Rack Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Specific build of my parametric rack for the HP Elitedesk 800 G1.

Ocena
0 / 5
Polubienia
55
Pobrania
485
Wydruki
1
Wyświetlenia
3305
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
GNU General Public License v3.0

Print settings:

  • 0.2mm layer height
  • 4+ bottom layers and 5+ top layers
  • 6 perimeters w/ 0.6mm nozzle or 9 perimeters w/ 0.4mm nozzle
  • 10+% infill
  • I used PETG. PLA may work fine, but I was concerned about creep. I have also not tested the latch durability with PLA yet.

Specific build of my parametric rack to work with the HP Elitedesk 800 G1. Sized for a 177mm x 38mm x 175 mm (WxHxD) box. May work for other HP Elitedesk and Prodesk models. 

Note: I found the height in HP documentation was for the front profile and didn't include the raised feet and rubber strips. This model assumes you remove the rubber strips, as this PC is slightly too large for my 1U rack design with the rubber in place. You can see in my pictures I removed them and placed them elsewhere on the underside of the box for safekeeping.

Tagi