159 modeli
This 19 inch 1U rackmount for the HP Elitedesk mini series is perfect for homelab enthousiasts that want 1 or more HP 1 liter pc's and rack mount them. The mount consists of two printed parts that both can be printed without supports by…
This should support basically every HP ProDesk and EliteDesk mini PC I could find pictures of. It also has mount holes to work mounted forward or backward in the rack. The rack I'm using it with is…
Base is extended out a little more than the original, and removed most of the top cover to allow for some clearance for screw heads if using the VESA mount holes, and to allow for some airflow in through the top vents. Prints without…
HP Elite/Prodesk mini (G3/4/5, possibly later) 10" 1U rack mount with 2 keystone slots. 250mm wide faceplate.
A 1U bracket to mount an HP EliteDesk 800 G3 , G4, or G5 in a 10-inch rack I designed and printed the Skeleten , a 10-inch rack to house my homelab. I wanted it to contain everything I needed, except maybe a NAS. From top to bottom: 2U -…
The middle part needs support on build plate only, the other parts shouldn't need any supports. Uses m4 machine screws and nuts to assemble after printing. buymeacoffee.com/dlford
Simple mounting brackets for different Mini PCs from HP. Should be compatible with the HP EliteDesk 800 series (at least G1 - G5). Possible event compatible with the HP ProDesk 600 series. To maximize the biggest strength, the model…
SSD HDD caddy mounting for HP EliteDesk ProDesk. Just add M3x8 screws and you are all good to go.
Needed to mount my HP Elitedesk 800 G5 Mini under my desk. Quickly sketched up this design with slotted holes for easy installation. Mount the computer upside down, so it can suck cold air from "top cover". Print Settings Printer Brand:…
This is a toolless caddy/mount for a 3.5 inch HDD in an HP EliteDesk 800 G4 SFF ( no hardware required ). This mount should fit almost all 3.5 inch HDD and should also work in other HP EliteDesk and ProDesk computers. It is meant to…
Add a second ethernet port to your mini PC! This adapter plate allows an ethernet port to be mounted in the Flex IO slot usually used for an additional display connector. This was designed for a ProDesk/EliteDesk G4, but it may fit other…
Light model to support a Prodesk or Elitedesk mini 800 G2 or equivalent.
Print settings: 0.2mm layer height 4+ bottom layers and 5+ top layers 6 perimeters w/ 0.6mm nozzle or 9 perimeters w/ 0.4mm nozzle 10+% infill I used PETG. PLA may work fine, but I was concerned about creep. I have also not tested the…
A redesign of the internals of the HP Elite/Pro Desk SSF G2 for more HDD space rather than using external drives. Requires removal of plastic holders for current caddy, which are easily removed with a small flat head screwdriver.…
I designed this replacement bezel, as I could only find one design and it didn't fit, even after scaling it up. So I designed this one from scratch. It has been designed in OnShape if you would like to make any changes. I've made two…
This is an upper part of HP EliteDesk 800 G3 front panel. The pcs I've bought arrived with part of the front panel missing, so I've designed and printed a replacement. It's a snap-fit, so should stay in place, if not, some glue may be…
Simple vertical stand for HP Elitedesk/Prodesk G3-G5 mini. Printed with 0,2 layer, 4-6 perimeters, infill gyroid 10-25% (printed 0,2, 6, 25) 2 variants. For HP Elitedesk 800 mini or HP Prodesk 600 mini. Line G3, G4 and G5. 3mf files for…
This is a bracket for the hp elitedesk 800 g6 (DM/1L PC model) flex port 2. Usually a discrete GPU or serial add-on use this cutout in the chassis but I wanted a bracket for an ethernet to m.2 (A+E Key) card since my WiFi slot wasn't…
This is a Remix of HP ProDesk / EliteDesk G4 Ethernet Port Flex IO Adapter von Burf | Kostenloses STL-Modell herunterladen | Printables.com from Burf. Please see his Model for Details. I could mount my Bracket without modification of the…
Original model was too tight and mounting holes are to narrow/far for some racks. Print 2 one for front and one for the Back. I used ABS to print it you can also use PETG. More infil - stronger part! I used 4 walls, 5 shell layers, 10%…
You need the Bracket and 4xM4 screws
I broke my cover so I made a new one ;) Fits my HP EliteDesk 800 G3 Desktop Mini but should also fit the previous and later models of the mini. If not the .step file is included for they who want to modify. I suggest printing in 100%…
Doporučuji materiál: ASA, ABS nebo PETG Výška vrstvy: 0,2-0,3 Nutné použít podpory.
Remix, just one minor change: Had to "cut" one outer sliding ring so that the integrated locking mechanism grabbed the slider. This remix is for 2.5" SSDs to fit into a 3.5" bay/slot, for HP Elitedesk 800 G4 TWR. Without any tools. Could…
A big thanks to pfml for providing his brilliant "quick and dirty" rack! In my setup, the VESA mount holes didn’t fit perfectly, so I modified the design and added more flexible holes to ensure better compatibility. further information:…
Simple mounting brackets for microPC. Can be printed standing or lying down. For lying down orientation please consider support placement proposed here in gallery. Design meant to use screws for desk mount and uses holes in PC case. Why…
HP Mini/Prodesk/EliteDesk VESA Mount for IKEA Skadis pegboard Tested on HP mini G6 and G9 but will probably work with any HP Mini with VESA mounting holes. Printed in e-PLA and seems to be holding ok, might redo in PETG later on
Another brilliant way to take up even less space on your desk with your hp elitedesk 800! [works on G3 but should work on G2-G6 – lemme know if otherwise] Enjoy! ***Edit*** I've redesigned it from the ground up. it now uses less plastic…
Clearance for M.2 SSD heatsink is 15mm from motherboard and 10mm from the top of the M.2.
Model a stackable design to hold my Hp Elitedesk pcs on top of each other. Printed on my ender 3 s1 pro and ender 3 v2, with 0.28 layer height, with supports.
Shorter Mounting Design This custom mount allows you to securely install an HP EliteDesk 800 G Mini PC within your 10-inch server rack. The remixed design provides additional support by assisting the PC from the back of the rack, reducing…
This is an adapter to mount an HP SFF Power supply in an ATX Computer case for easy case swap. Fits most HP SFF power supplies, I believe. Main dimensions of the Power supply this bracket is designed for are 95x73mm (length doesn't…
This works with HP EliteDesk and ProDesk G6 (and possibly G9?) Mini systems. It replaces the blank panel on the Flex IO 2 Port and let's you mount an ethernet adapter. It might work with other Ethernet adapters, but I've only tested it…
To secure the computer to the mount, you need two M4x6mm screws. There are options for 2 couplers, 1 coupler, or no couplers. The model can be accessed on OnShape here .
A simple snap in 10" 1U rack mount for the HP EliteDesk 800 G6 Mini. Should be compatible with ProDesk G6 models as well. Printing I have used dirt-cheap black PETG which is holding up fine. Try to avoid PLA as it probably won't hold up…
Redesigned the front plate of the HP Elitedesk G2 SFF to allow 4 80mm fans which are powered by a molex fan controller. this was required due to the internals being stripped out for additional HDD space and the single front fan did not…
Hp prodesk 10" panel rework to add a JetKVM next to it. I really wanted to fit the screen flat. because why have it at a angle? The JetKVM is to be disambled to fit, but the screws from the case can be reused in this print. the screen…
infill 90% 4 x 4m16 vesa 2 x tiny flathead screws
Designed a quick dual vertical mount for my two HP EliteDesk 800 G3 Mini 65W docker compute nodes. One model with docker logo, one no logo. Chassis of the G3 Mini (W x H x D) (not including bezel): 177.04 x 34.29 x 174.75 mm (6.97 x 1.35…
I needed to rackmount a G1 mini into a 19" rack, but could only find the G3+ version, or a G1 version for a 10" rack. Using these models, I was able to remix them into a version where I can have the G1 on the right side, and either use…
This screws to a 100mm x 100mm VESA mount on the back of an LCD Monitor to hold a HP Elitedesk G3 desktop computer. 4x screws are required to attach the bracket to the back of a monitor: M4x10mm. M4x12mm should work as well.
HP Elitedesk 800 G2 Mini - SSD Bushes I recently purchase the above PC only to find that the bushes for SSD or HDD were missing. I think the original HP bushings were made of a hard rubber compound. I designed some new bushings in PLA and…
I have printed this stand in PLA. To save some time, I used a layer height of 0.3 mm for most of the print. However, for the first 5 layers, I used a layer height of 0.2 mm to ensure a better adhesion to the bed. I also used an infill of…
This 2.5in drive tray fits HP Elitedesk 800 G4 (Possibly others). BambuLabs X1C Hatchbox Black PLA 20% infil All other settings default
A "quick and dirty" rack to position a cluster of 3 HP EliteDesk 800 G2 on a shelf. Printed in PETG, with support for the holes Each desktop is secured with 4 M4x10 screws using the VESA mount under the desktop. Next step: real…
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
This is a vertical stand to hold 2 HP EliteDesk 705 G4 DMs next to each other. It also is a parametric FreeCAD Model. I think it might work for other models possibly in the EliteDesk/Pro Desk line but it may require modification of the…
This version does hold the G1-G3 models the best, but ultimately I came up with this redesign which fits G1 through at least G6 if not all HP mini PCs…
HP EliteDesk 800 G1 Tiny Mini & 2.5" Seagate 5TB stand to keep things tidy. You will need to glue bits together. If you wish to screw stand to tiny client, use 2no M3x10 sxrews. No support needed. I have printed 30% infill.
Huge thanks to Spekkie3D for providing me with the STEP file. I have remixed he's left blank to be able to mount the powerbrick of the HP Elitedesk. Hopefully it's usefull to someone.
I've printed a bunch of stuff part of the ESRack system for my home rack but I didn't like the HP Elitedesk module by @EvilProphet , so I resized and combined the one created by @Spekkie3D and added ESRack side brackets. This retains all…
A vertical stand for the HP Prodesk / Elitedesk SFF models. It should work with any G3, G4, G5, G6 Prodesk 400 / 600, Elitedesk 705 SFF. Print settings: 3 perimeters PLA or PETG (I used PETG) 20% infill
Add some thickness to the walls, so they support the screw holes better. Model printed with PETG.
I have several of these HP mini PCs sitting unused, and I wanted to do something useful with them. I settled on using one as a NAS when I realized that I could put a 5-port SATA card in one of the m.2 slots, and a 10 GbE card in the…
After modification of the metal case, we can use this mount to install 2 HDDs above each other.
A stand to hold a HP EliteDesk 800 G4 SFF vertically. Has holes to save filament and allow the stand to be placed around the feet of the PC.
4x 3.5 HDD Disk mounting mod for a HP Elitedesk 800 G4 and G5. Still a work in progress. So keep in mind that you may need to make some tweaks to make this work. Print in PETG This is still an early version of the model. Requires a large…
Model work in progress, not final Here is a top cover for the Elitedesk mentioned in title, this sports mounting for the front cover with two screws and attachment to the rear screw. Vent design can be customized by changing sparse infill…
The stand is specifically for the USDT (Ultra Slim Desktop) version! There are other versions with different dimensions! This Mini PC doesn't sit flat on a surface (when standing vertical there is a small gap undernath it as seen in…
A bracket for HP EliteDesk 800 G3 SFF motherboard for mounting in Cooler Master NR200 NR200P cases. It's likely you can also use it for mounting inside other mATX and ATX cases but I have not tried it myself. This is a low effort model,…
Replacement front plate for HP Elitedesk 705 - small desktop PC with holes for ventilation. Original clips to hold front plate are to small to print, plate has to be glued on front of computer.
Pretty simple designs. Not perfect but work well. I made these because the other ones I was seeing required purchasing special screws from the hardware store. I haven't verified all the model numbers in the title but they should be good.…
Hi, I've done this holder for my "Home Server" to have a mini pc HP EliteDesk 800 G4, a power supply and a Seagate Expansion hard disk drive of 6Tb, to have everything on the same place and have a better airflow. Print settings: 0.20 of…
just combined two for two workstations to sit on
I purchased a refurbished HP EliteDesk 800 G3 for a home server project and realized that the mounting screws for the 2.5" drive bay were not included. The official screws from HP are quite expensive where I live and can only be bought in…
Halterung um einen Mini PC unter dem Schreibtisch zu Montieren. 2 pro PC Gedruckt mit einem Anycubic Kobra 2 Plus in PETG. 4 Wandlinien und 15% Infill Benötigt: 8x 3,5x20mm Schrauben Bracket to mount a mini PC under the desk. 2 per PC…
File down the cleat to adjust fit.
I needed a model to hang my Elitedesk on the wall but didn't want to attach it permanently since i'm going to mount it in a tight closet. This way i can just slide it out if i ever need to plug something in. The standoffs need to be cut…
remixed from HP Elitedesk 800 g2/g1 SFF Server Face by magicGnome96
Lay flat as seen on the first image. Remixed for M4 socket head screws and made it printable without supports + prettified it a bit.
I needed a good way to place these amazing mini pc's behind a monitor. they both have vesa 100x100 but I cannot screw them together… welp. I gave up on screws and decided on the miracle that is ZIP TIES! and behold a simple 2 hour print…
Designed this in F360 for my HP Elitedesk 705 G4 Hope you enjoy!
So I've got my hands on HP EliteDesk 705 g4 mini pc. Wanted to use it as my home server. It had a AMD Ryzen 5 2400GE CPU, which is only 35w TDP, but still - under IDLE loads it would sit at ~55-65 C For some reason HP decided to not…
I designed this wall mount for the HP EliteDesk 800 SFF to integrate it into my homelab setup. This mount securely holds the PC while keeping it off the desk and out of the way. Printing & Assembly Instructions To use this mount, you'll…
Printed with organic supports. Requires filament with good layer adhesion (Petg, Greentec).
This is an IO panel cover allowing the motherboard from HP EliteDesk G1 PCs to be reused in standard ATX cases. The motherboard shown in the photo is from an EliteDesk 800 G1 -- later generations have a different set of ports.
The hard drive spacer is to mount a hard drive or SSD into an HP Elitedesk 800 mini using existing PC mounting points. The stand off is printed to have a friction fit in the hard drive or SSD.
A stand to hold a HP EliteDesk 800 G4 SFF vertically.
Designed for HP Elitedesk/ProDesk 400/600 SFF models with a single 3.5" HDD bay, it holds up to 5× 2.5" HDDs in the 3.5" and DVD slots. For better cable management, it’s recommended to install only 4× drives and leave the bottom slot…
Legs printed with Inland PETG. Printed with Bambu Labs P1S.
This is vertical Stand for HP EliteDesk 800 / 400 Series Mini PC
Couldn't find a good setup to give the computer some space form the desk for ventilation. 36mm Clearance where the computer sets. If you want tighter, you could probably scale down to 99% of the original and would be super snug, depending…
I would recommend using PETG since I designed it for needing as little filament as possible. You need to print it twice, because it needs to be mounted on the front and the back of the rack. It's designed for racks with a depth of 200mm,…
Designed for HP Elitedesk/ProDesk 400/600 SFF models with a single 3.5" HDD bay, it mounts 2× 2.5" drives under the existing 3.5" cage. The DVD drive must be removed to install this bracket. Spacing is very tight, recommended for SSDs or…
This is a 3D-printable mounting adapter for installing an M.2 A+E-key 2.5GbE NIC in the rear Flex IO opening of compatible HP Mini PCs. The adapter securely holds the external RJ45 module in the Flex IO opening while the NIC replaces the…
Enlarged holes (7mm) with some wiggle room for different racks (I use LabRax)
Modified the blank to include a 3.5 HDD caddy on the same rail, also incorporated a keystone slot for the HP G3 mini so an ethernet port can be on the front of the rack.
🇩🇪 Retro Konsolen Conversion-Kit für HP ProDesk / EliteDesk G3–G5 Dieses Conversion-Kit verwandelt deinen HP ProDesk oder EliteDesk Mini (G3–G5) in eine stylische Retro-Konsole – perfekt für Fans der 70er, 80er oder 90er Optik. Der Umbau…
Work in progress Printed in ABS (in picture), avoid printing in PETG as it may be too flexible and sag Requires M5 BHSC screws (8mm long + 16mm long) and M5 sized rack screws (Haven't tested M6) for mounting onto a rack, and M5 heatset…
Legs printed with Inland PETG. Printed with Bambu Labs P1S.
Remix of the "left blank" model that adds a shelf to hold any size power adapter
Wall or under-desk mounting bracket designed for older types of HP's Prodesk and Elitedesk Mini PC's. They have a VESA 100mm attachment on the bottom and this bracket makes use of that. The PC side bracket has a spot for the 65watt power…
This is a wall mount for the hp elitedesk 800 g2 mini. The Server-Mount file has to be printed twice, otherwise the mini PC could be too heavy. Use a buffer pad, for example felt gliders for chairs. The buffer pad is placed into the…
A 10-inch rack mount for the HP EliteDesk 800 G2 Mini. Print settings: PETG No supports 10% infill 0.2 resolution
The ESRack system includes components: Mounting Brackets - used to install unit in the rack, avilable in 3 sizes: Short Medium Long Device Modules - each module can handle a single device Possible Configurations: - [Mounting Bracket…
Simple stand for hp elitedesk 705 g4 mini. It stays stable enough with one at front, but you should print two (one for front and one for back) to make it stable. Print Settings Printer Brand: AnkerMake Printer: AnkerMake M5 Rafts: Doesn't…
Backplate to be used with my motherboard offset plate. I recommended printing it with some higher temp resistant filament like PETG. I've used orange Prusament PETG. I personally have RX6400 GPU so there is an additional cutout for…
Needed a place for 4 elitedesk psu's in a 10 in mini rack.. Noticed that the bottom of the rack had an additional .5 u so I took advantage of that and made this mount.. There is also space for the cable slack beside each holder.
This model is for mounting 3.5" HDD to HP Elitedesk SFF. It requires #6-32 screws. I use 3/8 round head screws. My HP Elitedesk SFF is a G3. My understanding is other generations use similar bracket and the model should work, but I have…
under the desk hp elitedesk g1 pc mount v2
