HP Elitedesk 800 g2/g1 SFF Server Face
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Redesigned the front plate of the HP Elitedesk G2 SFF to allow 4 80mm fans which are powered by a molex fan controller.
- Ocena
- 5 / 5
- Polubienia
- 48
- Pobrania
- 232
- Wydruki
- 2
- Wyświetlenia
- 6316
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
Redesigned the front plate of the HP Elitedesk G2 SFF to allow 4 80mm fans which are powered by a molex fan controller.
this was required due to the internals being stripped out for additional HDD space and the single front fan did not keep the system cool.
all mounting points align with case so can be a drop in replacement, Mk1 loses functionality of the power button and USB's. Mk2 will relocate these to the top of the case but in my current set up the PC is used as a server.
Print Settings
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
10%
Filament: eSun PLA Any
Notes:
Printed with 2 walls, the key to this is going to be glass bed and good bed adhesion to get a nice finish on the front.
Category: Computer