1 / 3
10" (inch) rackmount hp elitedesk and prodesk with jetkvm mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wanted to mount a jetkvm next to my hp elitedesk's so i made this.
- Ocena
- 0 / 5
- Polubienia
- 50
- Pobrania
- 221
- Wydruki
- 0
- Wyświetlenia
- 4537
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 4)Remiksy (0)Kolekcje (82)Powiązane
Hp prodesk 10" panel rework to add a JetKVM next to it.
I really wanted to fit the screen flat. because why have it at a angle?
The JetKVM is to be disambled to fit, but the screws from the case can be reused in this print.
the screen pops out with little effort.
And the only thing that is wise to change is cutting the tape so that the ribbon cable can bend a little lower.
Best printed on it's frontcover with organic supports.
