Liczymy pasujące modele…
This should support basically every HP ProDesk and EliteDesk mini PC I could find pictures of. It also has mount holes to work mounted forward or backward in the rack. The rack I'm using it with is…
Base is extended out a little more than the original, and removed most of the top cover to allow for some clearance for screw heads if using the VESA mount holes, and to allow for some airflow in through the top vents. Prints without…
The middle part needs support on build plate only, the other parts shouldn't need any supports. Uses m4 machine screws and nuts to assemble after printing. buymeacoffee.com/dlford
SSD HDD caddy mounting for HP EliteDesk ProDesk. Just add M3x8 screws and you are all good to go.
Add a second ethernet port to your mini PC! This adapter plate allows an ethernet port to be mounted in the Flex IO slot usually used for an additional display connector. This was designed for a ProDesk/EliteDesk G4, but it may fit other…
10" rackmount for the HP ProDesk Mini G4. Prints without supports when placed front face down.
Light model to support a Prodesk or Elitedesk mini 800 G2 or equivalent.
A redesign of the internals of the HP Elite/Pro Desk SSF G2 for more HDD space rather than using external drives. Requires removal of plastic holders for current caddy, which are easily removed with a small flat head screwdriver.…
I designed this replacement bezel, as I could only find one design and it didn't fit, even after scaling it up. So I designed this one from scratch. It has been designed in OnShape if you would like to make any changes. I've made two…
HP ProDesk 600 G3 mini mount compatible for mount into an IKEA pax cabinet hardware needed: 2x M4 x 10 mm countersunk head screw 4x euro screws 6,3 x 16 mm (for example from IKEA)
mount to place under a desk
HP Mini/Prodesk/EliteDesk VESA Mount for IKEA Skadis pegboard Tested on HP mini G6 and G9 but will probably work with any HP Mini with VESA mounting holes. Printed in e-PLA and seems to be holding ok, might redo in PETG later on
Shorter Mounting Design This custom mount allows you to securely install an HP EliteDesk 800 G Mini PC within your 10-inch server rack. The remixed design provides additional support by assisting the PC from the back of the rack, reducing…
This is an adapter to mount an HP SFF Power supply in an ATX Computer case for easy case swap. Fits most HP SFF power supplies, I believe. Main dimensions of the Power supply this bracket is designed for are 95x73mm (length doesn't…
This works with HP EliteDesk and ProDesk G6 (and possibly G9?) Mini systems. It replaces the blank panel on the Flex IO 2 Port and let's you mount an ethernet adapter. It might work with other Ethernet adapters, but I've only tested it…
Simple bracket to attach HP ProDesk 600 G2 Mini to the underside of my desk. Attached with 4 wood screws, uses machine screws in factory mounting holes to hit against rear support to keep from sliding out the back. Additional Hardware: 4x…
Hp prodesk 10" panel rework to add a JetKVM next to it. I really wanted to fit the screen flat. because why have it at a angle? The JetKVM is to be disambled to fit, but the screws from the case can be reused in this print. the screen…
infill 90% 4 x 4m16 vesa 2 x tiny flathead screws
Stand for HP ProDesk mini PCs. Works with HP ProDesk 400 G6/G7 mini and HP Pro Mini 400 G9 and probably also for a lot of similar models. Printed in PLA with 0.30mm layer height, no supports needed.
I created this frame to hold an 2.5 Inch SSD. The frame simply holds on to the existing screws. I can recommend this cable: https://de.aliexpress.com/item/1005006379328635.html Feel free to create a custom copy for yourself:…
This is a vertical stand to hold 2 HP EliteDesk 705 G4 DMs next to each other. It also is a parametric FreeCAD Model. I think it might work for other models possibly in the EliteDesk/Pro Desk line but it may require modification of the…
This version does hold the G1-G3 models the best, but ultimately I came up with this redesign which fits G1 through at least G6 if not all HP mini PCs…
A vertical stand for the HP Prodesk / Elitedesk SFF models. It should work with any G3, G4, G5, G6 Prodesk 400 / 600, Elitedesk 705 SFF. Print settings: 3 perimeters PLA or PETG (I used PETG) 20% infill
I have several of these HP mini PCs sitting unused, and I wanted to do something useful with them. I settled on using one as a NAS when I realized that I could put a 5-port SATA card in one of the m.2 slots, and a 10 GbE card in the…
I used wood screws and mounted it directly to the wooden board. Power supply uses similar bracket. Also cables are held up with zip ties using this easy print: https://www.printables.com/model/205265-cable-management-easy-solution
This 3D-printed adapter lets you replace a 3.5" drive slot with two 2.5" SSD/HDDs in the HP Prodesk 600 G5 SFF. Printed on an Elegoo Neptune 3 Pro with black PETG took 3 hours and 42 minutes to complete. The print used a 0.2mm layer…
HP ProDesk 400 vertical stand
This 2.5" HDD/SSD holder was designed to be used in HP ProDesk 400 G4 tiny PCs, in such a way that the drive's SATA connector is inline with the socket for this adaptor cable: https://www.aliexpress.com/item/1005006849197833.html Also…
Pretty simple designs. Not perfect but work well. I made these because the other ones I was seeing required purchasing special screws from the hardware store. I haven't verified all the model numbers in the title but they should be good.…
just combined two for two workstations to sit on
This adapter allows an Ethernet port to be mounted in the Flex IO slot originally used for an extra display output. This was designed for a ProDesk/EliteDesk G4, but it may fit other generations of HP mini PCs. The adapter is designed for…
I needed something to mount a large hard drive in my HP Prodesk 600 SFF. The models I was able to find were all for M3 screws, but my drive took what I think are 6-32 screws. I made a version that works with those screws. I'm sure other…
Lay flat as seen on the first image. Remixed for M4 socket head screws and made it printable without supports + prettified it a bit.
Designed this in F360 for my HP Elitedesk 705 G4 Hope you enjoy!
I wanted to use the empty M.2 slot that was used for the Wifi card to add a 2.5gb port, so I bought a M2 A+E to ethernet adapter on aliexpress and made this adapter to make it somewhat clean inside the computer. It's not perfect, a tiny…
This is a caddy I designed to hold two drives for an HP ProDesk 600 GT which I purchased without the original part. It connects with the original locking mechanism and holds securely in place. You will want small (possibly set type)…
Replacement bracket for 15mm thick HDD, which fits ProDesk 400 G5 Mini. It has been designed to install it with 1mm thermal pad on top (which touches the mini PC case providing additional cooling), so adequate space has been left out.
Designed for HP Elitedesk/ProDesk 400/600 SFF models with a single 3.5" HDD bay, it holds up to 5× 2.5" HDDs in the 3.5" and DVD slots. For better cable management, it’s recommended to install only 4× drives and leave the bottom slot…
Print the 5 or 7 mm Use m3 screws Screw to HDD (2.5) or SSD (2.5) Insert to Caddy In my case i use on left side 7mm on right side 5mm maybe your case will be different one. (7mm on a side where mechanism lock/unlock is)
This stand is intended to place four HP ProDesk 400 G4 tiny PCs vertically. Two aspects differentiate it from other similar stands: - small stop blocks at the front and the back of the PC, to not have to hold it by hand against when you…
Thanks to this adapter plate that replaces the original optical and disk bay for the HP ProDesk 600 G3 you can mount up to 6 disks while still being able to mount the top enclosure of the PC. The model for the disk bay is: 3 Slot 2.5" HD…
Hello! Introducing the stand for HP ProDesk 600. The stand provides a stable vertical position of the nettop. Printing. Layer 0.2 mm. Filling 100 %. Generic PETG profile.
I built NAS server from old HP ProDesk G1 MT computer. I have added some 2.5" SSD disks there so i needed some holder for them so i have print holder for 6 SSD and slide whole holder to 5.25-inch half-height drive bay (under CD-ROM…
I used this cover to create a seamless front panel on the HP ProDesk 400 G2 with a removed optical drive. The cover plate matches the shape of the front panel, allowing it to be glued into place quite nicely. The second image shows the…
Designed for HP Elitedesk/ProDesk 400/600 SFF models with a single 3.5" HDD bay, it mounts 2× 2.5" drives under the existing 3.5" cage. The DVD drive must be removed to install this bracket. Spacing is very tight, recommended for SSDs or…
This is a 3D-printable mounting adapter for installing an M.2 A+E-key 2.5GbE NIC in the rear Flex IO opening of compatible HP Mini PCs. The adapter securely holds the external RJ45 module in the Flex IO opening while the NIC replaces the…
Shortened the original model and made the rack mounts slotted to allow some wiggle room.
🇩🇪 Retro Konsolen Conversion-Kit für HP ProDesk / EliteDesk G3–G5 Dieses Conversion-Kit verwandelt deinen HP ProDesk oder EliteDesk Mini (G3–G5) in eine stylische Retro-Konsole – perfekt für Fans der 70er, 80er oder 90er Optik. Der Umbau…
Based on Zoilo Mora's Model (CC BY-SA 4.0), slightly redesigned bracket for my HP ProDesk 600 G4 Mini . Changes to the original model: Move screw hole to better fit alignment for 3rd mounting hole for ProDesk 600 G4. Added slight insets…
Wall or under-desk mounting bracket designed for older types of HP's Prodesk and Elitedesk Mini PC's. They have a VESA 100mm attachment on the bottom and this bracket makes use of that. The PC side bracket has a spot for the 65watt power…
This was made to cover the slot where a slim disk drive would fit on an HP ProDesk 400. We've had a few drives fail at work and no one uses the drives often enough to justify ordering replacements. This just makes the desktop look a…
Halterung für den HP ProDesk 400 G5 Desktop Mini inklusive des Netzteils
Tested on ProDesk 600 mini G3. Should fit on most other generations. Similar to the previous version but with a cutout for the power cord so it fits both orientations. The space between the two feet remained 100mm. I added a variant with…
HP Prodesk/Elitedesk g3 double 2.5 ssd mount
A simple remix/edit, which add a small wall on the backside, so it won't slide backwards when I turn it on. If you like it, remember to like the original!
A little screw that you need for installing 3,5 inch hard drives into an hp desktop.
I needed a new duct for my pc's, so i made it. Have Fun.
This is just a simple stand that I made to hold the computer along with 3 portable hard drives that I had.
New model. Version 2 loads from the back the screen is flush with the front of the Panel. No more Apple Watch sticking out of the panel.
This is a convenient, sturdy mount designed specifically for attaching the SanDisk Extreme Portable SSD to your HP ProDesk Mini G4. Keeping your workspace organized, it securely holds the SSD in place, optimizing airflow and…
This remix is intended for allowing a SATA and SATA power extension cables to pass through the chassis if there is a blank flex IO port 2 cover. The intended use for it is to non-destructively allow passing the cable if you want to extend…
Print 2 pieces, use M4 x 10mm screw Category: Computer
Left side version that replaces the keystone jack cutouts with a proper JetKVM mount instead. **JetKVM specs for reference:** - Angled so display is flat against rack - Width: 43mm - Height: 31mm - Depth: 60mm - Has 2x M2 screw holes on…
A simple sideways stand for the HP ProDesk 600 G6. Updated to be stronger and be a tighter fit. PS, Print the stand upright, i.e. up into the air as in the image, for a much stronger print. This object was made in Tinkercad. Edit it…
Printable version of HP's 2.5" drive isolation grommet screws used in EliteDesk and ProDesk desktops. HP ships these systems with screws for only one drive, leaving the extra bays unusable. Sure, you can buy the originals — but who buys…
Držák HP ProDesk na hranu monitoru.
Replacement for the original SATA carriage in HP Prodesk 400 G5 Mini to fit a second NVMe drive. Use this adapter: https://www.amazon.de/dp/B07887N7RH
This is a 3D-printable mounting adapter for installing an M.2 A+E-key 2.5GbE NIC in the rear Flex IO opening of compatible HP Mini PCs. The adapter securely holds the external RJ45 module in the Flex IO opening while the NIC replaces the…
The HP elitedesk/prodesk minis have an internal wifi antenna that leads to a plastic nub on the back. This model replaces that plastic nub, allowing replacing the antenna with a cable leading to a wifi antenna connector like this one: In…
this is a backplate made for the hp prodesk 600 fitted for my wireless card. i've lost the low profile adapter, made one and fitted it, it works and keeps the card stable inside the case. I've provided the project file.
A small shim to hold the HDD cage in place if you purchased the 600 G4 mini that comes with a HDD.
HP Prodesk 600 G2 - 2.5GB network card adapter. I needed it, so I figured somebody else might need it as well. It's not pretty, but does the job. It's little bit shifted when you screw it to the MOBO, that's because I use Sonoff zigbee…
I removed the laterale holes
******* E N G L I S H ******* Turns the HP ProDesk 600 SFF (G3, G4 and G5 generations) into a games console reminiscent of the legendary Atari VCS 2600. It might also work with the G6+, but I think that one’s wider, isn’t it? Contents…
DeHP ProDesk Under-Desk Mount Eine Halterung zur Befestigung eines HP ProDesk PCs unter einem Schreibtisch . Die Halterung wird unter der Tischplatte montiert und ermöglicht es, den PC platzsparend unter dem Schreibtisch zu verstauen.…
This is just a simple stand that I made to hold the computer along with 3 portable hard drives that I had.
Designed this in F360 for my HP Elitedesk 705 G4 Hope you enjoy!
Wall or under-desk mounting bracket designed for older types of HP's Prodesk and Elitedesk Mini PC's. They have a VESA 100mm attachment on the bottom and this bracket makes use of that. The PC side bracket has a spot for the 65watt power…
I used wood screws and mounted it directly to the wooden board. Power supply uses similar bracket. Also cables are held up with zip ties using this easy print: https://www.printables.com/model/205265-cable-management-easy-solution
10" rackmount for the HP ProDesk Mini G4. Prints without supports when placed front face down.
