1 / 15
HP ProDesk 5.25-inch half-height SSD drive bay — zdjęcie 1
1 / 15

HP ProDesk 5.25-inch half-height SSD drive bay

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Holder for six 2.5" SSD to 5.25-inch half-height drive bay (under CD-ROM drive).

Ocena
0 / 5
Polubienia
9
Pobrania
65
Wydruki
0
Wyświetlenia
453
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I built NAS server from old HP ProDesk G1 MT computer.
I have added some 2.5" SSD disks there so i needed some holder for them so i have print holder for 6 SSD and slide whole holder to 5.25-inch half-height drive bay (under CD-ROM drive).
When you do not need CD-ROM drive you can put two these holders there and you will have holder for 12 SSD disks (not tested, i have used only one holder for 6 disks under CD-ROM drive).
Also i have printed two holders to secure all SSD disks on their positions. These holders are screwd to main holder (see photos, holders are blue).
If your disks are secured enough and not moving much inside holder you can avoid these additional holders.

It will probably fit other PC brands/cases as well (not tested).

As it is bigger object and you can have problem with warping i have printed it verticaly (bottom as where Numbers and A,B bay letters are) with brim and supports.

X1C BambuLab
0.24 (draft)
20 infill
PLA+
brim (to avoid warping)
supports

Tagi