P
Printables
Zimaboard Dual SSD stand remix
Remixed from my hex hole remix of the original dual HDD stand by orax, reduced height for two slim SSDs.
Wyniki wyszukiwania: ssd
Liczymy pasujące modele…
P
Printables
A cage for mounting 5 x 2.5” drives (SSD)
A replacement for mounting SSD drives in PC cases. It can hold up to 5 SSD drives. The design also includes holes for at
P
Printables
Crucial X9 / X10 (PRO) SSD under desk mount
I designed a mount, to mount the Crucial X10 Pro ssd under my desk. X9 / X10 (PROs) have the same size - should fit all of these models. The original version is quite snug, so the ssd fits perfectly between the bracket and the table If…
P
Printables
SSD Standoff for Dell Wyse 5070 Thin Clients (2mm,3mm,4mm-Assorted washer sizes)
Small part printed solid for strength. Use PETG or ABS, pla is not recommended
P
Printables
2.5 SSD to 3.5 HDD caddy adaptor
hard drive adaptor to fit a 2.5 inch SSD or laptop drive into a 3.5 inch desktop PC bay just added mk2 which has holes for mounting flat :) hope you find i useful Also on thingverse but I like here more 😋
P
Printables
Px-4358 SSD mount
The SSD holder had no outer shell to protect the SSD and the components on the board so ı made this box The photo of the print isnt the final model it had misaligned screw holes in the back which have been fixed in the uploaded model
P
Printables
Pi 5 Case for GeeekPi SSD Shield with holes
Model for Rasberry Pi 5 with GeeekPi N04 M.2 M-Key NVMe SSD Shield
P
Printables
Hex portable SSD Stand
I created a stand for my external Drive. I use the following Drive: https://www.amazon.com/Elements-Portable-External-Drive-WDBU6Y0050BBK-WESN/dp/B089978LBB Feel free to remix etc.
P
Printables
PS5 SLIM wall mount with HDD/SSD/Gamedrive-pocket
This model could share some of it's looks with another great wall mount. Some of their ideas I used in my design. Although I drew every line myself. There is one problem I have with mounting a gaming console of over 3kg's on my wall. I…
P
Printables
Fan Duct for 120mm SSD mount
Custom use case fan duct for this great fan to ssd mount, by MLoeko . There is both spacer pillar and the wall file. This lets you mount a full set of drives clamped between two sets of the SSD mounts using threaded rod in the fan…
P
Printables
Original Xbox HDD/SSD Caddy
This is a custom HDD caddy for the original Xbox. Transferring files over FTP is capped at 10MB/s, which can be painfully slow. I wanted a faster way to move files by taking the drive out and connecting it directly to my PC. The problem…
P
Printables
M.2 SSD case with lid
Remix of https://www.printables.com/model/702716-parametric-box-with-lid by @Billiam
P
Printables
SSD CASE
I remixed this model because, after ordering a different board than the one in the original design, I needed to adapt it for compatibility. I created two versions: one for direct insertion of a SATA-USB-A board and another for use with a…
P
Printables
GMKTec G3 SATA SSD addon with Fan
This is a small addon to GMKTec G3 that allows fitting 2.5'' SATA SSD and Fan on top to cool said SSD and the original Nvme and memory. I used it with M2 SATA to SATA adapter below: EDIT: M2 Sata Adapter Converter | M2 Ngff Sata 7pin…
P
Printables
2.5" HDD / SSD to 3.5" HDD Adapter (Bottom Mount)
This bracket allows you to mount a 2.5" drive where a 3.5" one normally goes. I'm using it inside a Fujitsu Esprimo E400 case but it's a standard part. It'll fit in many other cases. You'll need 8 screws; 4 to mount the bracket and 4 to…
P
Printables
SanDisk SSD Extreme Protective Case
SanDisk SSD Protective Case with cable and USB adapter storage. Designed for SanDisk Model: SDSSDE61 Tested and Fits: 1 TB & 2 TB SSD The SSD slides into the protective cover and is held in firmly by a friction fit. The slide-on cover…
P
Printables
Samsung Portable SSD T7 Touch - Gehäuse
Samsung Portable SSD T7 Touch - Gehäuse. Doppelter Schutz bei voller Zugänglichkeit. PETG 0,2mm; Düse 0,4mm
P
Printables
Öl Einfülladapter für Öl Verschlussdeckel AUDI VW SEAT SKODA (3Pins) 06Q 103 485 D
Universal Öl-Einfülltrichter - Adapter / Trichter / Ölwechsel Einfüllhilfe KFZ Öl Verschlussdeckel AUDI VW SEAT SKODA (3Pins) 06Q 103 485 D 4Zylinder-Ottomotor 2,0L 888evo4 Grundmotor T2H / T2g / TX5 / TX6 / T3Q / TX9 / T3J / T8Y PR: 4BI…
P
Printables
Tower 300 SSD/HDD rear panel mount for MSI project 0 motherboard
While Thermal take dosent recommend it, you can install the MSI Project Zero motherboard and its an amazing combo. However there are definitely some issues, one of them being the power cable interference with the SSD/HDD tray in the back.…
P
Printables
SSD adapter for Antec P101 HDD tray
Printable HDD Tray for the same case to extend it to 10 HDDs: https://www.printables.com/model/1423100-antec-p101-hdd-tray I saw one that had the ssds in vertical, but I made this one to take advantage of the natural airflow of the case…
P
Printables
Modular NAS HDD/SSD Bracket with TPU Sliders & Dampeners
Overview: This is a modular 3D printable HDD/SSD bracket designed for NAS servers and DIY storage setups. The frame is printed in PLA, while flexible TPU sliders hold drives securely in place and reduce vibrations. TPU dampeners can also…
P
Printables
Small HP Grommet Screw for 2.5" SSD EliteOne 800 G2 AIO
The original design did not fit the HP Eliteone 800 G2 AIO. Even though at first glance it looks compatible. The diameter on the base is different. I'm not sure what other models use this smaller size, but I'm sure it's not a once off.…
P
Printables
2x 2.5" HDD/SSD in 3.5" mount
I originally designed this in April 2024. I recently refined it a bit and finally decided to upload it. Works well with the model this is inspired by: https://www.printables.com/model/261877 The base 3.5" HDD reference model offers all…
P
Printables
Samsung T7 SSD Rugged Box
This is rugged box for Samsung t7 and t7 shield ssd. You need 6x35mm m3 screws or 35+ m3 screws with m3 nuts.
P
Printables
XIKII INDUSTRY FF08 – Custom SSD Tray Replacement with 70mm Fan Mount
Upgrade your XIKII INDUSTRY FF08 case with this custom-designed SSD tray replacement. Instead of the stock SSD tray.
P
Printables
2.5 inch to 3.5 inch HDD/SSD Drive Sled Adapter Superleggera
I needed to install a couple of 2.5" SSDs in my Supermicro 6028R-E1CR24N server. The correct drive sled for the server is an MCP-220-00140-0B which goes for about $27 on eBay. So instead of buying 2 of those and being done, I spend a…
P
Printables
HDD/SSD caddy trays Chenbro server Universal 2.5/3.5inch
Works with SK33502 Chenbro. If. If you need to use 3.5, simply cut the hashed lines (in red in the pictures) to unlock the 3.5 capability. Hopes this helps someone 👍. NAS/SAS/SATA/SSD/HHD/Storage Server. Edit 3/2026 V2 uploaded since v1…
P
Printables
M.2 SSD Adapter 2230 to 2280 slot (NGFF /NVMe)
Adapter for mounting a 2230 M.2 NGFF /NVMe SSD into a 2280 slot. Converts 2230 SSD to 2280 length Not compatible with very shallow or recessed M.2 slots (mainly in newer thin laptops). Stable and accurate screw hole alignment Print…
P
Printables
M.2 SSD Adapter 2242 to 2280 slot (NGFF /NVMe)
Adapter for mounting a 2242 M.2 NGFF /NVMe SSD into a 2280 slot. Converts 2242 SSD to 2280 length Not compatible with very shallow or recessed M.2 slots (mainly in newer thin laptops). Stable and accurate screw hole alignment Print…
P
Printables
Voron 2.4r2 Removable SSD
This is a modification of the front right skirt on a Voron 2.4r2 350 printer. It allows for a connected SSD to be removable making it easy to make backup images of the disk before upgrades. Needed Hardware: If the SATA connection sticks…
P
Printables
Gridfinity M.2 NVME SSD 22 x 80 storage, stackable, 10 bays
Slight remix to a great original model to add a few extrs slots.
P
Printables
Samsung T9 SSD cable holder
A simple clip to hold a USB cable on the Samsung T9 external SSD. Was inspired by a few similar designs for the T7 here on printables. Print as oriented, perhaps use a loose brim (I used 0.3 brim separation gap on mine) I also have a…
P
Printables
Mac Mini Storage Expansion -- Four 2.5" SSD Drives
Update 2026-01-20: I added an option for using a SATA to USB adapter and not on how to make it fully USB-C if your Mac Mini has the ports (I have an older version that doesn't). Update 2025-12-26: I added a "blank slate" version of this…
P
Printables
UNAS Pro 8 SSD tray
The original did not fit the UNAS Pro 8. This modification worked for me.
P
Printables
SATA SSD Cage for HP ZBook Fury 15 G8
I had a 2,5" SATA SSD lying around. So I wanted to fit it to my newish HP ZBook Fury 15 G8 but it didnt come with the apropriate cage. So I designed this one. It slips under some montign brackets in the frame of the Laptop therefore it…
P
Printables
ASRock AMD BC-250 Shell Case w/ 40mm SSD Fan
I saw a comment on the original make that the hot air is dumped out over the SSD. I added a 40mm fan to bring in cool air to hopefully counteract that. This uses 4 M3 heat inserts and 4 M3 screws to secure the fan to the case. The wire…
P
Printables
Ugreen SSD Cover
I recently got a 2 Tb SSD and I got the Ugreen SSD Inclosure to put it in. I did not care too much for the rubber protective cover that goes over the aluminum inclosure. So, I made this one and printed it out of PETG-CF. Looks amazing in…
P
Printables
DataBlock - Design SSD M.2 NVMe 2230 case
This is an original case looking like a folder logo we could find on different operating systems. It is made to look simple and to be mixed with the colors we like. It can host a SSD M.2 NVMe 2230 in size. It is designed to have passive…
P
Printables
rack10in-ATX_key_Bot_Led_SSD2.5
To have an ATX power supply in a 10-inch rack in 2 easy-to-print parts: 2.5" SSD, 2 LEDs, and a PC on/off switch
P
Printables
13HDD 8SSD 4U NAS Rack
This is my DYI NAS. I reused some old 4U ATX rack case that was originally capable of holding just 4 HDDs and 3 CDroms. I really liked "45Drives HL15 case" so I borrowed idea nad HDD placement, and recreated simillar thing with 3d…
P
Printables
Anschlussdose mit 5 Einlässen für drei WAGO Klemmen 221
Die Verteilerdose ist so gestaltet, dass man nicht wie sonst immer Platzprobleme hat. Es sind 5 Einlässe vorgesehen, die alle über eine Kabelanpressung im Deckel verfügen. Es gibt drei Plätze für 3er WAGO 221 Klemmen zum einkleben mit…
P
Printables
Nodemcu V3 Base case Remix for SSD1302 OLED 0.91
Printed in PETG on heavily modified ender3v2 using klipper.
P
Printables
SSD Enclosure ScreAdapter
Add screw support for those enclosures (like the Lexar E300/E350) that use rubber fittings to hold the M.2 SSD.
P
Printables
Sabrent DS-SC5B Docking Station 2.5" to 3.5" SSD/HDD adapter
I have a USB direct attached storage (DAS) from Sabrent. It works great for 3.5" HDDs, however doesn't come with adapters for 2.5" drives. This is the model I'm referring to: "Sabrent USB 3.2 3.5" SATA Hard Drive Tray-less Docking…
P
Printables
DataFlop - Design SSD M.2 NVMe 2230 case
This is an original case looking like an old floppy disk. It is made to look simple and to be mixed with the colors we like. It can host a SSD M.2 NVMe 2230 in size. It is designed to have passive ventilation, and has a hole shaped like…
P
Printables
Threaded Insert Front Panel Adapter for NAS CASE 6-bay (+3 SSD)
I printed this case and struggled to keep the front bottom panel on with magnets alone. I didn't have right-angle SATA power connectors, so the cables stuck out a bit, pushing the panel stronger than the magnets could hold it. These…
P
Printables
2.5" HDD/SSD Holder – 10 Drives (7&9.5mm Support)
A compact and practical storage holder designed for 2.5" HDD and SSD drives . The holder can store up to 10 drives and is compatible with both 7 mm and 9.5 mm thick disks , without any adapters or modifications. Each slot is shaped to…
P
Printables
Flex ATX Bracket for NAS CASE 6-bay (+3 SSD)
The wonderful NAS CASE 6-bay (+3 SSD) project from https://www.printables.com/@makerunit_735717 expects a SFX form factor PSU. This bracket allows you to use a Flex ATX form factor instead. I modified "external_upper_right_panel_v13.stl"…
P
Printables
Aqua Computer QUADRO mount bracket for 2.5in SSD mount
This adapter mounts an Aqua Computer QUADRO fan controller to a 2.5 inch SSD mount on the back of most PC cases. I needed to add some more fan ports and temperature probes to my Aqua Computer Aquaero mounted in my main workstation PC. The…
P
Printables
![[Improved] Compact 3.5" HDD to dual 2.5" SSD adapter bracket](https://media.printables.com/media/prints/ac2d56e6-df56-4ccd-a5e2-4d388c67e099/images/12013527_cacd6ac9-967a-4ac6-afaa-9d2a03847371_911aabac-a28f-448e-b4b2-60654c587297/screenshot-2026-02-11-182058.png)
[Improved] Compact 3.5" HDD to dual 2.5" SSD adapter bracket
At first, I tried modifying the original model within Prusaslicer, but that was cumbersome, so I re-created it in CAD in about 15 minutes. It is now 90mm instead of 134mm long and while it does not have the ~102mm spacing for 3.5" side…
P
Printables
Samsung T7 ssd Case
Case for Samsung T7 SSD I printed from Prusament Woodfill and 3DPower PLA Marble.
P
Printables
Diazed fuse inset tool (Passdelsverktyg)
Very very simple tool made in 2 minutes, nothing fancy it just works, use it to change fuse inserts. Please be aware of local laws and regulations if you are allowed to change this part in your electrical setup or if you need to consult a…
P
Printables
Hard case for Samsung T7 SSD
A cover for Samsung T7 SSD that is very attractive, highly functional, and easy to print. No supports.
P
Printables
Wii hard drive stand compatible with 3d printed Enclosure HDD/SSD 2.5"
Enlarged the drive bay to accept the enclosure from this model
P
Printables
DOCKCASE Magsafe M.2 SSD Gridfinity Holder
They don't seem to sell the exact model I have anymore but here is a similar one: https://www.amazon.com/DockCase-Enclosure-PD-Protection-Compatible/dp/B0DSN3PHXX?th=1 Fits into a 1x2 Gridfinity and is 6u tall.
P
Printables
2.5" SSD/HDD/U2 drive caddy - Stackable, tool-less, no supports
This model is for a stackable drive caddy that fits 2.5" drives, be they SSD, HDD, or U2. The model prints with no supports, and fit onto 2.5" drives without screws. You can then stack the caddys/drives for organization. Included are 4…
P
Printables
2.5" Sata SSD HD Stackable frame
Clear out the cable clutter and organize your storage with this modular, stackable mounting system for 2.5" SATA SSDs. Whether you are building a home server, a Raspberry Pi cluster, or just need a clean way to manage extra drives in a…
P
Printables
Tool-less 3.5" Hard Drive Caddy for Supermicro Server 2.5 HDD/SSD Adapter
Modified Front - Added Cooling holes
P
Printables
SATA SSD korpus body
каропка для сата ссд подходит для дехп и адата. Ширина предмета 5.7 см Глубина предмета 4.98 см Высота предмета 0.86 см
P
Printables
Samsung 870 EVO SSD Protector
I like to carry around my Samsung 870 EVO 1TB SSD in my backpack incase I need to access stored documents. But I dont like it getting scratched up in my tech pocket. This simple TPU printed protector helps protect it from damage from…
P
Printables
SATA SSD PCB Enclosure
You're going to need superglue and screws for assembly. May not be suitable for all SSD PCBs, look attentively.
P
Printables
SSD Stackers 15mm U.2
SSD Stackers for 15mm U.2 size SSDs are meant to allow you to stack and mount two or more SSDs together You will need 4 per SSD you add to a stack. A stack of 2 needs 4, stack of 3 needs 8, etc. Always start by mounting your top drive…
P
Printables
Double Stack 2.5" SSD bracket
A simple double stack ssd bracket for SSDs that mount via the bottom screws. Simply lay it flat in the slicer and mirror it length-wise to get both sides.
P
Printables
SSD M.2 2230 to 2280 ADAPTER
Print at 0.2mm or 0.1mm layer height for accurate dimensions. Supports recommended on screw end only, SSD end does not need supports. Allows use of 2230 SSD in computers or other devices designed for 2280 SSDs with no mounting options for…
P
Printables
Multiple SSD organizer
This very easy and straight forward ssd box storage, was inspired by an existing design. The main reason to create my own, was the need to have it fully parametric and an different orientation.
P
Printables
UGREEN M.2 NVMe SSD Case VESA Mount (Behind Monitor Mount)
This is a simple VESA mount holder for the UGREEN M.2 NVMe SSD enclosure. It allows you to securely mount the SSD case behind your monitor using the VESA screws, keeping your desk clean and your storage easily accessible. The enclosure…
P
Printables
Intel Nuc Case Extension for SSD - non stackable
About I needed non-stackable version of Stackable SSD Case for Intel NUC , so I remixed it: this was designed and tested for D34010WYK model only much easier to mount SSD disk reuse original bottom part with the rubber feet - also cutouts…
P
Printables
Kids safe Raspberry Pi case with SSD
Hardware needed: 2.5" SSD Sata -> USB Adapter 8x M3x10 Screws RPI 4 RPI cooler kit with Fan
P
Printables
Under-Desk Dual 2.5" HDD/SSD Holder — Single Piece, No Supports
This under-desk holder keeps your 2.5" drives out of sight and well-ventilated, without the clutter of loose cables or drives sitting on a desk. It fits two standard 2.5" HDDs or SSDs and was designed around real-world use — not just…
P
Printables
SSD1306 128x64 OLED Screen (Reference CAD Model)
This is a 3D reference model of a 128×64 SSD1306 OLED display module, designed to assist with accurate placement and fitting in larger assemblies. The model captures the overall dimensions, mounting holes and pin header position commonly…
P
Printables
North Pi Case - with rear IO adapter and NVMe SSD for Raspberry Pi 4B
Raspberry Pi 4B Case - X872 & Ice Tower Edition This is a custom enclosure for the Raspberry Pi 4B, specifically designed to fit: X872 Expansion Board (NVMe M.2 SSD support). Waveshare Connector Adapter to route HDMI and USB-C ports to…
P
Printables
2,5" HDD / SSD holder
Easy-to-print 2.5" HDD/SSD holder. Available in multiple capacities (3, 5, 8, 10) and thicknesses (8 mm & 10 mm), but can be easily edited to fit your exact needs. On the Core One, it can be printed without supports (not tested on other…
P
Printables
ssd mount for hotshoe/coldshoe
Hi it's my first design so please be gentle. I needed an ssd mount for my lumix camera, camera world being expensive I've searched for a simple nvme usb-c adapter (i used this one:…
P
Printables
Skadis Mount to Hold an External SSD
This Skadis mount is designed to hold a standard external SSD case. The mount uses the Skadis T-Clip system, allowing easy attachment and removal from the board without additional screws or tools. To attach it to the Skadis board, print…
P
Printables
M.2 2230 SSD x16 Rack
A simple M.2 2230 SSD holder based on M.2 2280 SSD Storage Holder 16 Count by ChOaD - Thingiverse
P
Printables
Raspberry pi (3B, 4, 5) and 2.5 inch ssd case
Slim minimalistic raspberry pi and 2.5 inch ssd case
P
Printables
Stand with room for multiple SSDs as well as a top fitting a Mac Mini
My Mac Mini now has several SSDs attached full time. I previously used my model ( https://www.printables.com/model/1463273-mac-mini-ssd-and-cable-management-stand). that housed a single SSD but I've now outgrown that and decided to create…
P
Printables
SSD 2.5" to 3.5" Bay Adapter NAS - Converter Mounting Kit
SSD/HDD 2.5" to 3.5" Bay Adapter NAS - Converter Mounting Kit To mount 2 x 2.5" drives in 3.5" bays in NAS system This model is compatible with all NAS devices on the market, as well as with:…
P
Printables
#AccessDenied stencils
Introducing #AccessDenied - a project from my time at art school last year. Most non-disabled people have no idea just how many obstacles disabled people face. What if we tagged these obstacles in the real world - and in social media - so…
P
Printables
Custom Magnetic Enclosure for onn. 500GB Portable SSD
The original onn. SSD case can be fragile or lack personality. This 3D-printable replacement provides a sturdier housing while maintaining the ultra-fast speeds ( MB/s read) of the internal drive. Magnetic Mounting : The back features two…
P
Printables
Samsung T7 Portable SSD - CAD Model
This is a CAD model of the Samsung T7 Portable SSD that I designed in Shapr3D, based on the real product. The shape and dimensions are the same across all T7 capacities (500GB, 1TB, 2TB, 4TB), so you can use this model regardless of the…
P
Printables
HDD/SSD Gehäuse Halter für 19 Zoll System
Ich nutze meine Raspberry Pi 4B's mit externen USB Gehäusen von UGREEN. Leider gibt (gab es!) bisher keine Möglichkeit diese in ein 19Zoll Rack zu integrieren. Als Vorlage diente: Raspberry Pi 4 1U rack-mount bracket by russross via…
P
Printables
Double 2.5 to 3.5 SSD HDD bay adapter
Adapter to hold 2x 2.5" drives in a single 3.5" bay. Remixed from Tadziurski 's, original design here . 10/19/24- Per requests, I have added a model with the third set of mounting holes for 3.5" bays. I have also added a model with…
P
Printables
3.5" to 2.5" HDD/SSD bracket
Print 2 pieces. Use standard screws to attach SSD to brackets and HDD screws for 3.5" HDD to mount in case. Align brackets to fit mount holes.
P
Printables
SSD1306 Oled Display panel case
case for the SSD1306 OLED display. after inserting the display, heat and press the 4 pins to lock it, or glue it use supports only from the print bed for the screw holes post a make!
P
Printables
2.5" SSD/HDD CD Caddy
The SSD version holds 6x Small Form Factor (SFF) 2.5" (7mm thick) drives in the space of two 5.25" CD drives. The HDD version fits 10mm thick drives in the same space. This allows you to make use of empty space in older computer cases,…
P
Printables
Lego-Compatible 2.5" HDD/SSD Strut
Prints well, I'm not positive on tolerances, so it doesn't “grab” perfectly onto Lego bricks, but it nestles in well and holds … alright. I figure most folks will need to do some playing with their own filament to determine fitment. To…
P
Printables
2009-2011 Apple iMac Single/Dual SSD Adapter
I didn't find any adapter suited for the setups I usually do so I made this one. It is minimalist, can be printed on the tiniest printer and does not need support. It can handle up to 2 ssds (in place of the 3.5" spinning drive),…
P
Printables
Samsung T7 - SSD mount for ASIAir Pro
A mount for the Samsung T7 to attach to the side of an ASI Air Pro (may fit other ASI Air models) Print in TPU No supports required Designed in OnShape I also have a model for the Samsung T1 SSD here:…
P
Printables
Gridfinity Samsung T7 SSD
I created a Model to hold 3 Samsung T7 SSD's Laying on the long side so it fits in the top drawer of an Ikea Alex. it also fits the two cables that comes with the SSD's
P
Printables
Raspberry Pi-5 Dual SSD Case
This case is designed to hold a Raspberry Pi-5 and two standard 2.5” (7mm thick) SATA SSD’s. It is based on my Raspberry Pi-5 SSD Case that was originally designed for a single SSD. The two SSD’s are mounted on top of each other, with…
P
Printables
Tool-less 2.5" Hard Drive Caddy/Sled for Supermicro Server (Press-Fit)(HDD or SSD)
Designed for the older generation but ubiquitous Supermicro Caddies. Part # SB16105 or MCP-220-00047-0B HDD Status LED's are functional with additional 2mm AND 1mm fiber-optic cable. I've used THIS by searching "fiber optic 2mm" and…
