1 / 5
Under-Desk Dual 2.5" HDD/SSD Holder — Single Piece, No Supports — zdjęcie 1
1 / 5

Under-Desk Dual 2.5" HDD/SSD Holder — Single Piece, No Supports

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Under-desk mount for two 2.5" HDDs or SSDs. Prints vertically as a single piece with no supports

Ocena
0 / 5
Polubienia
3
Pobrania
26
Wydruki
0
Wyświetlenia
139
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution

This under-desk holder keeps your 2.5" drives out of sight and well-ventilated, without the clutter of loose cables or drives sitting on a desk. It fits two standard 2.5" HDDs or SSDs and was designed around real-world use — not just looks.

Design highlights:

  • Single-piece print — no assembly, no glue, no fasteners between parts

  • Printed vertically with a 5mm outer brim for adhesion stability

  • Zero supports needed — the geometry is fully self-supporting

  • Retention lip holds drives securely without touching or stressing the USB connector

  • Generous internal volume and ventilation holes — drives run cool even under sustained load

  • Tapered screw holes for clean, tool-free countersunk mounting under any desk

  • Printed in ASA for temperature resistance and long-term dimensional stability

Print settings used:

  • Material: ASA

  • Orientation: Vertical

  • Supports: None

  • Brim: 5mm outer

  • Layer height: 0.2mm (adjust to preference)

Works with standard 2.5" USB HDDs and SSDs with Micro-B or USB-C connectors. The cable exits cleanly from the front without being pinched or bent.


Let me know if you want the badge colors, font, or layout of the hero image tweaked — or if you want a second variant using one of the other photos.

Tagi