Under-Desk Dual 2.5" HDD/SSD Holder — Single Piece, No Supports
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Under-desk mount for two 2.5" HDDs or SSDs. Prints vertically as a single piece with no supports
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 26
- Makes
- 0
- Views
- 139
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
This under-desk holder keeps your 2.5" drives out of sight and well-ventilated, without the clutter of loose cables or drives sitting on a desk. It fits two standard 2.5" HDDs or SSDs and was designed around real-world use — not just looks.
Design highlights:
Single-piece print — no assembly, no glue, no fasteners between parts
Printed vertically with a 5mm outer brim for adhesion stability
Zero supports needed — the geometry is fully self-supporting
Retention lip holds drives securely without touching or stressing the USB connector
Generous internal volume and ventilation holes — drives run cool even under sustained load
Tapered screw holes for clean, tool-free countersunk mounting under any desk
Printed in ASA for temperature resistance and long-term dimensional stability
Print settings used:
Material: ASA
Orientation: Vertical
Supports: None
Brim: 5mm outer
Layer height: 0.2mm (adjust to preference)
Works with standard 2.5" USB HDDs and SSDs with Micro-B or USB-C connectors. The cable exits cleanly from the front without being pinched or bent.
Let me know if you want the badge colors, font, or layout of the hero image tweaked — or if you want a second variant using one of the other photos.