Liczymy pasujące modele…
Introducing the Fractal Define R5 HDD Tray, designed specifically for the Fractal Design R5 case. This model combines multiple designs to ensure a perfect fit, allowing users to utilize rubber mounting hardware for optimal vibration…
hard drive adaptor to fit a 2.5 inch SSD or laptop drive into a 3.5 inch desktop PC bay just added mk2 which has holes for mounting flat :) hope you find i useful Also on thingverse but I like here more 😋
Einfache HDD-Storage Box für 7 Festplatten. Gedruckt mit PLA auf einem Ender 3 V3 KE mit 15% Infill
This model could share some of it's looks with another great wall mount. Some of their ideas I used in my design. Although I drew every line myself. There is one problem I have with mounting a gaming console of over 3kg's on my wall. I…
This is a stackable 3.5" hard drive tray that allows each drive to slide in and out independently of the others. It is assembled using M3 bolts and 5 mm heat set inserts, and allows for a 120 mm fan to be mounted on either side for…
These keys can be inserted in the lock hole and help you identify the drives, as well as twist to unlock Print the pegs separately, then add a drip of superglue and insert into the key, if it does not fit simply sand the edges a little.…
This is a custom HDD caddy for the original Xbox. Transferring files over FTP is capped at 10MB/s, which can be painfully slow. I wanted a faster way to move files by taking the drive out and connecting it directly to my PC. The problem…
The factory HDD caddy for the Dell OptiPlex 9020 Micro only fits a 9mm drive. This is a custom version designed to fit a 15mm drive. I’m reuploading this to Printables so more people can find it, as it took me three hours to discover that…
I am building a server from my Lenovo ThinkcentreM910s. Since I want to accommodate as much storage space as possible, I removed the DVD drive to accommodate another 3.5 inch HDD. For this, a total of 5 or 6 rivets have to be drilled out…
Use a piece of filament for the hinge. The device is working ok for smaller files 720p 1080p h264. I would say max 5gb files. Mild overclock is necesary, libreelec and a light theme for kodi like quartz. Disable all animations etc, hw…
This bracket allows you to mount a 2.5" drive where a 3.5" one normally goes. I'm using it inside a Fujitsu Esprimo E400 case but it's a standard part. It'll fit in many other cases. You'll need 8 screws; 4 to mount the bracket and 4 to…
This is a 1U hard drive tray designed to hold two 3.5" HDDs, compatible with 10-inch server or network racks. Category: 3D Printing
BOM Part Qty Image M4 Heatset src 1 src 2 12 M3 Heatset src 1 src 2 8 M4x5mm (BHCS preferred) 7 M4x10mm (BHCS or SHCS) 5 M3x10mm (BHCS preferred) 8 Jonsbo N3 Backplane src 1 (verified) src 2 src 3 src 4 I also designed a 7-drive version…
I made this USB replacement for my 4 TB Seagate HDD. 2.5" portable drive.
While Thermal take dosent recommend it, you can install the MSI Project Zero motherboard and its an amazing combo. However there are definitely some issues, one of them being the power cable interference with the SSD/HDD tray in the back.…
There are two different models: 3x5 units -- holds 7 3.5" drives (odd number but seemed to be the most efficient) 3x3 units -- holds 3 3.5" drives BUT has wider slots (I use this to store cold spares still in packaging) Category: Computer
Stackable dual HDD tray for the Antec P101/Silent This can be used to replace the 5.25' drive bay with another 2 HDDs.
Printable HDD Tray for the same case to extend it to 10 HDDs: https://www.printables.com/model/1423100-antec-p101-hdd-tray I saw one that had the ssds in vertical, but I made this one to take advantage of the natural airflow of the case…
Overview: This is a modular 3D printable HDD/SSD bracket designed for NAS servers and DIY storage setups. The frame is printed in PLA, while flexible TPU sliders hold drives securely in place and reduce vibrations. TPU dampeners can also…
I originally designed this in April 2024. I recently refined it a bit and finally decided to upload it. Works well with the model this is inspired by: https://www.printables.com/model/261877 The base 3.5" HDD reference model offers all…
I needed to install a couple of 2.5" SSDs in my Supermicro 6028R-E1CR24N server. The correct drive sled for the server is an MCP-220-00140-0B which goes for about $27 on eBay. So instead of buying 2 of those and being done, I spend a…
Works with SK33502 Chenbro. If. If you need to use 3.5, simply cut the hashed lines (in red in the pictures) to unlock the 3.5 capability. Hopes this helps someone 👍. NAS/SAS/SATA/SSD/HHD/Storage Server. Edit 3/2026 V2 uploaded since v1…
This bracket allows you to mount an HDD where you'd normally install a DVD drive in a computer. It was designed to use as little filament as possible thus making it cheap and quick to print whilst still being sturdy. You'll need 8 screws;…
This bracket allows you to install two 3.5" HDDs anywhere you'd like. Intended for computer case modding. Make SURE you print two of these, one NEEDS to be a mirror of the other. This is easy to do in your slicer software. You'll need a…
Modular 3U Trays for 3,5HDD Tray Caddy Screew Sata connector at the back Rack Disk on Amazon Rack Disk on Ali Express Sata Connectors
I added the holes from the PS2 caddy cross mix (by Earth4sX) to the short Gamestar version of the tray (by RetroGameRev
Tray and handle are printed from PETG. Models require supports. Automatic or custom supports can be used. To use custom supports, import the main STL file into the slicer with the STL file for the supports as a single model of parts.…
Should fit the following Precision models: T3600 T3610 T5610 T5600 T5810 T7810 Printed at .20 mm in PETG. I do not recommend PLA because of the heat of the drives. I ended up buying 1x 1/2" #6-32 UNC screw for $0.37 at Ace to secure it in…
This can be printed as is. Place it sideways on the printer bed and enable normal supports.
I used this HDD cage for my homelab server. Because the server case was originally a mining case for 12 GPUs, it had 0 HDD slots. I printed the main body + the reduction caddies from PETG, and the rails from TPU, which significantly…
I created these supports to destroy hard drives using an Einhell TC-BD500 drill press . This allows the hard drive to be held in place during drilling to make drilling easier and prevent the HDDs from moving. I made a version for 2-inch…
Printed in a Prusa mini+ Print settings: 0.20mm QUALITY PLA filament Supports: None Infill 15% Used Filament 1.92gr print time 14 min
Printed in a Prusa mini+ Print settings: 0.20mm QUALITY PLA filament Supports: None Infill 15% Used Filament 1.92gr Printing time 14 min
I tried using the original single drive model (By Scubadiver48 ) to position my Drives in my Computer horizontally, However after multiple failures of the pegs on the side I switched to the model that inspired this one (By Zoltán Takács…
These brackets allow you to add two full size HDDs to dell optiplex 7040 MT. NOTE: o must first rmove the piece of metal fom the front of the case that sperates the HDD bay from the optical dive bay. UPDATE: the fist version o fthe…
This is my DYI NAS. I reused some old 4U ATX rack case that was originally capable of holding just 4 HDDs and 3 CDroms. I really liked "45Drives HL15 case" so I borrowed idea nad HDD placement, and recreated simillar thing with 3d…
Great original design by npopson but I needed to fit 8 drives in my array
Reduction frame for HDD 2.5" to 3.5" with screw insert. Screw insert for 3mm screw. Printed from PLA with 0.6 mm nozzle.
3D printable HDD mount for the Acer Aspire A515-52. STEP model provided for easy adaptation to other laptops.
I have a USB direct attached storage (DAS) from Sabrent. It works great for 3.5" HDDs, however doesn't come with adapters for 2.5" drives. This is the model I'm referring to: "Sabrent USB 3.2 3.5" SATA Hard Drive Tray-less Docking…
A compact and practical storage holder designed for 2.5" HDD and SSD drives . The holder can store up to 10 drives and is compatible with both 7 mm and 9.5 mm thick disks , without any adapters or modifications. Each slot is shaped to…
I wanted to use 3.5" hdd to 2.5" ssd adaptor in my western digital mycloud drive.. couldn't find any for the caddy style slider...so designed one. there are two kinds of drives.. rotary one and ssds.. these models are for both.. if you…
It's just a simple redesign of the original to meet my requirements.
At first, I tried modifying the original model within Prusaslicer, but that was cumbersome, so I re-created it in CAD in about 15 minutes. It is now 90mm instead of 134mm long and while it does not have the ~102mm spacing for 3.5" side…
This mount is designed to be fixed to any vertical surface and hold a 2.5" SATA HDD. It provides two mounting holes for screws. I also designed it with ventilation in mind to keep the hard drive cool and prevent it from overheating. There…
Replacement case for Zalman or iODD external hard drive.
Enlarged the drive bay to accept the enclosure from this model
Made these rails to install seagate SAS drives in the 4-in-3 | 3.5"/5.25" HDD bay mount model. Recommend in PETG!
Just print as is, without supports. I've used 0.32mm layer.
This model is for a stackable drive caddy that fits 2.5" drives, be they SSD, HDD, or U2. The model prints with no supports, and fit onto 2.5" drives without screws. You can then stack the caddys/drives for organization. Included are 4…
Modified Front - Added Cooling holes
#WORK IN PROGRESS# Takes 2 92mm Fans in the front, uses M3 heat inserts and bolts to join Printed Parts; 4x Front and rear panels 2x Side Panels 4x Base Plate 2x Rear Brace Piece 4x Rear Panel Reinforcement
The Fractal Focus 2 case doesn't offer much in terms of 3.5" HDD mounting. I wanted to use that case for a server with a large RAID array. This project is the solution I came up with. BOM: (28) M3 heatset inserts (28) M3-8mm SHCS (2-4)…
What is it? Its a 1RU dual HDD caddy holder for 10" server racks to support (x2) 3.5" hard drives in a hot-swap configuration. Can be used for modular HomeLab NAS RAID / JBOD setups. HDD Tray Caddy slide and clicks into place along rails…
This under-desk holder keeps your 2.5" drives out of sight and well-ventilated, without the clutter of loose cables or drives sitting on a desk. It fits two standard 2.5" HDDs or SSDs and was designed around real-world use — not just…
This under-desk bracket holds a single 3.5" HDD out of sight and well-ventilated, with zero cable stress and a dead-simple install. The design is two identical halves — print the same file twice. Design highlights: Two identical halves —…
Easy-to-print 2.5" HDD/SSD holder. Available in multiple capacities (3, 5, 8, 10) and thicknesses (8 mm & 10 mm), but can be easily edited to fit your exact needs. On the Core One, it can be printed without supports (not tested on other…
This is a custom-designed, heavy-duty mount to attach your LaCie d2 Quadra external hard drive to an IKEA Skadis pegboard. Unlike universal holders, this design specifically utilizes the original aluminum guide rails on the sides of the…
A nice backplate that helps hold together a Sabrent USB/SATA adapter and a laptop (2.5") hard drive so it can be used as a portable/backup USB drive. Category: Computer
Simple holder for up to three 3.5" HDDs stacked together. Includes a mount for a 120×120 mm fan, with closed sides to push air through the drives and improve cooling. Drives are screwed in directly, no anti-vibration pads used. Assembly…
Hello, Sharing my project of storage box for 10x 2,5" HDD drives. It's made to fit the standard 7mm thick hard drives (100x70x7mm) - it won't fit thicker versions. 🚀 Want to sell prints of my models? Subscribe to my Patreon for only…
If you made your old HDD as external HDD, this is real deal for you. To protect it from scratches or damage you can use this one. I printed it from PLA, but PETG should be better. Holes fit perfectly to original screws.
NEW VERSION HERE 3U cage to mount up to 6 3,5" SATA drives in a 10 inch rack cabinet. 2,5" SSD are supported with the provided adapter. Do not print in PLA. The heat and the weight WILL eventually deform it. Requires a 10"+ build plate…
12 bay drive cage for 3.5" HDDS. Designed to fit into a CX4200a from Sliger designs, but will fit in any 4U 'a' chassis from Sliger Designs. Depending on Depth of Case, you may be able to fit more than one of these cages into a single…
Fractal Design R2 & R3 HDD Caddy/Sled - Remixed from cfelicio's version to included 2.5in drive mounting holes
Cable lock holds the USB plug firmly in place — no more accidental disconnects Perfect fit for all WD Elements Portable models (1TB, 2TB, WDBUZG0010BBK-EB etc.). Now my drive stays connected even when tossed in a bag!
If you order a Dell PRO Slim plus with an optical drive, it comes with a drive cage to mount a 3.5" hdd. But no screws. The screws on the website appear to be $4AUD each Here are 4 solutions that can use existing hdd screws you have lying…
This is a remix of a thingiverse file to fit 3 hard drives. I made an optional 80mm fan bracket too. https://www.thingiverse.com/thing:5894917 Go rate the original if you like it. They did a great job.
Inspired by @OloDeepdelver’s designs, I redesigned my previous model to support hot-swap sleds. Like the earlier version, this design accommodates up to 6 drives (3.5" or 2.5") and has been optimized for both “back-to-front” and…
Got a pile of spare laptop drives and no good way to mount them? This bracket lets you stack up to six 2.5" hard drives into a clean, compact tower, perfect for a DIY NAS, home server, or any storage build where space and tidiness matter.…
Made an adapter for two 3.5" HDD drives in a place where only one is provided inside a Dell Optiplex 7080 MT computer. The caddy is supposed to have TPU supports with screws for mounting the drives. You need 8 screws for the drives and…
Made an adapter for two 3.5" HDDs or for one inside a Dell Optiplex 7080 MT computer. The caddy is designed to have TPU brackets with screws for mounting the disks. You need 8 screws for the disks and 4 to secure the caddy to the front of…
Ich nutze meine Raspberry Pi 4B's mit externen USB Gehäusen von UGREEN. Leider gibt (gab es!) bisher keine Möglichkeit diese in ein 19Zoll Rack zu integrieren. Als Vorlage diente: Raspberry Pi 4 1U rack-mount bracket by russross via…
🇬🇧🇺🇸 Update — July 29, 2026: Added STEP files of backplate and fan holder Update — May 14, 2026: Added a new backplate variant for 2 mm LEDs. I used these LEDs: https://www.aliexpress.com/item/1005009162962843.html Measured dimensions of…
This is a remix of Jodinskylab's Folder Drive ( https://www.printables.com/model/1413392-folder-drive ). The folder model has been adjusted to be able to accommodate HDDs which are slightly thicker than SDDs. This still works with the…
3.5" HDD to 5.25" Bay Adapter A simple adapter frame for mounting a standard 3.5" hard drive into a 5.25" drive bay. The name is intentionally based on the actual use: it is not a reduction of the disk itself, but an adapter for…
Replacement HDD tray for Fractal Design Meshify C Computer case.
New Version: Xbox Series S + External HDD Stand - Clean, Circles and S Patterns by Dvora3D | Download free STL model | Printables.com The model has 4 holes for pads of 19mmX20mm. Maximum area for external HDD (2.5"): 140mmX80mmX15.8mm.…
New Version: Xbox Series S + External HDD Stand - Clean, Circles and S Patterns by Dvora3D | Download free STL model | Printables.com The model has 4 holes for pads of 19mmX20mm. Maximum area for external HDD (2.5"): 140mmX80mmX15.8mm. If…
I needed more places to put hard drives in my home server. I found the mounts by sk_2002 and xcooling, but after printing the 4 bay version, I realized that my case had a 140mm fan mount on the bottom. some redesigning in sketchup, and…
Adapter to hold 2x 2.5" drives in a single 3.5" bay. Remixed from Tadziurski 's, original design here . 10/19/24- Per requests, I have added a model with the third set of mounting holes for 3.5" bays. I have also added a model with…
Print 2 pieces. Use standard screws to attach SSD to brackets and HDD screws for 3.5" HDD to mount in case. Align brackets to fit mount holes.
Stack on a tophat (+25mm) for the SKTC A02 computer case. Use it to fit both a taller CPU heatsink and a topside 3.5" HDD, or 2x SSD with a generic 2x 2.5" to 3.5" bracket. Secure the tophat with the top panel via longer 1-1/4 inch (~30mm…
Yet another HDD Mount for the NR200. This version allows you to have both a top slim fan and a full length GPU. this one also has extra space between the model and the adapter to allow better air flow. I've used Noctua's a12x15 as a top…
The SSD version holds 6x Small Form Factor (SFF) 2.5" (7mm thick) drives in the space of two 5.25" CD drives. The HDD version fits 10mm thick drives in the same space. This allows you to make use of empty space in older computer cases,…
Prints well, I'm not positive on tolerances, so it doesn't “grab” perfectly onto Lego bricks, but it nestles in well and holds … alright. I figure most folks will need to do some playing with their own filament to determine fitment. To…
HDD 2.5/3.5" Adapter-Bracket 3 Slot/Bays - Honeycomb Design Use Case: Compatible with T-Slot/V-Slot profiles, racks, and PC test benches. Can be paired with the 80mm cooling fan bracket:…
Designed for the older generation but ubiquitous Supermicro Caddies. Part # SB16105 or MCP-220-00047-0B HDD Status LED's are functional with additional 2mm AND 1mm fiber-optic cable. I've used THIS by searching "fiber optic 2mm" and…
3x1 Gridfinity external HDD holder for two Western Digital MyPassport drives
Version 4 of the model requires no supports when printing. Printed with ABS.
![[Improved] Compact 3.5" HDD to dual 2.5" SSD adapter bracket](https://media.printables.com/media/prints/ac2d56e6-df56-4ccd-a5e2-4d388c67e099/images/12013527_cacd6ac9-967a-4ac6-afaa-9d2a03847371_911aabac-a28f-448e-b4b2-60654c587297/screenshot-2026-02-11-182058.png)
