5.25" Front Panel Bay to 3.5" HDD Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows you to install a standard computer hard drive in your 5.25" front panel bay.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 188
- Wydruki
- 1
- Wyświetlenia
- 806
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This bracket allows you to mount an HDD where you'd normally install a DVD drive in a computer.
It was designed to use as little filament as possible thus making it cheap and quick to print whilst still being sturdy.
You'll need 8 screws; 4 to mount the bracket and 4 to mount the HDD to the bracket.
Made in PLA, printed at a 0.2mm layer height with 20% grid infill. It is working with no issues.
If this model is useful to you, consider checking out my YouTube channel (https://www.youtube.com/@RepairWins) I cover electronics repair, electronics modding, the odd DIY project, woodworking (if you stand a mile away and squint) and much more.