2x 2.5" HDD/SSD in 3.5" mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fit 2x 2.5" drives in a 3.5" drive slot
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 182
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
I originally designed this in April 2024. I recently refined it a bit and finally decided to upload it.
Works well with the model this is inspired by: https://www.printables.com/model/261877
The base 3.5" HDD reference model offers all common drive screw holes. The honeycomb structure can be a little challenging to print so look out for that. The base model is printed standing upwards and the model files are already correctly oriented. The clips/rails protrude ~8mm. Supports two 9,5mm height 2.5" drives. Tolerance only applies to the rails.
I used a 0,8mm nozzle, 0,5mm layer height, the 0,5mm tolerance model, printed with PLA, a brim, without supports in less than 3h. Rails printed with 0,25mm layer height. Still holds up after a year.
0,4mm nozzle users can try with a 0,25mm layer height and the 0,25mm tolerance model.