1 / 7
LaCie d2 Quadra HDD Mount for IKEA Skadis — zdjęcie 1
1 / 7

LaCie d2 Quadra HDD Mount for IKEA Skadis

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Custom mount for LaCie d2 Quadra. Uses original side rails for a perfect fit on your IKEA Skadis pegboard.

Ocena
0 / 5
Polubienia
0
Pobrania
4
Wydruki
0
Wyświetlenia
60
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a custom-designed, heavy-duty mount to attach your LaCie d2 Quadra external hard drive to an IKEA Skadis pegboard.

Unlike universal holders, this design specifically utilizes the original aluminum guide rails on the sides of the LaCie enclosure. This ensures a rock-solid fit and prevents the drive from sliding or tipping. It’s the perfect solution to clear up desk space while keeping your backup drives accessible and well-ventilated.

Key Features

• Precision Fit: Slides directly into the LaCie d2 Quadra housing grooves.

• Skadis Compatible: Features integrated hooks designed for the IKEA Skadis hole pattern. (5 mm thickness of the standard IKEA board)

• Stability: Engineered to handle the weight of the d2 Quadra (which is quite heavy).

• Cable Management: Open back design allows for easy access to Power, FireWire, eSATA, and USB ports.

Print Settings

To ensure the hooks don't snap under the weight of the drive, I recommend the following settings:

• Material: PETG or ASA (highly recommended for better creep resistance and strength over PLA).

• Wall Loops: 2 

• Infill: 15%

• Supports: Only needed for the Skadis hooks.

• Orientation: Print on the side for maximum hook strength (layer lines should not be parallel to the hooks).

Installation

1.Print two brackets.

2.Hook the mount into the Skadis board.

3.Slide the LaCie d2 Quadra into the rails.

4.Connect your cables and you're good to go!

File Information

• STL: For direct printing.

• STEP: Included for easy remixes or adjustments to other Skadis-style boards.

Tagi