2,5" HDD / SSD holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Easy-to-print 2.5" HDD/SSD holder.
Available in multiple capacities (3, 5, 8, 10) and thicknesses (8 mm & 10 mm), but can be easily edited to fit your exact needs. On the Core One, it can be printed without supports (not tested on other printers). Drives are easy to insert and won’t damage the electronics.
Thickness:
There are two different thicknesses!
2.5" HDDs/SSDs come in two different thicknesses (7 mm & 9.5 mm). Choose which version you need based on the drives you have. (Holders are slightly wider so they don’t scratch the electronics.)
Settings (What I would use on Core One):
15% infill
0.20 mm layer height (SPEED)
No supports
HF 0.4 mm nozzle
PLA
With these settings, the overhang was relatively clean. For better quality, or when using a different filament or printer, you may need to adjust the settings.