1 / 11
Xbox Series S + HDD 2.5" Stand - S Holes
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Xbox Series S + External HDD 2.5" stand with S holes for ventilation
- Ocena
- 5 / 5
- Polubienia
- 54
- Pobrania
- 344
- Wydruki
- 2
- Wyświetlenia
- 1687
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (60)Powiązane
The model has 4 holes for pads of 19mmX20mm.
Maximum area for external HDD (2.5"): 140mmX80mmX15.8mm.
The model is a little different of images, because I fix some parts.
If selected 2 Colors model you will need:
-1x XboxLogo.stl
-1x XboxSSHDD-SHoles-2Colors.stl
If possible, publish your 3d print on the Make tab.
Print Settings
Printer: Longer LK4
Rafts: No
Supports: Yes, but in the S holes it isn't necessary.
Resolution: 0.2
Infill: +15% cubic
Top/Bottom: 4
Walls: 3