HDD cage for 10 inch rack - hot swap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modular HDD cage for 10 inch rack with support for hot swappable Dell sleds and plenty of airflow
- Ocena
- 5 / 5
- Polubienia
- 144
- Pobrania
- 300
- Wydruki
- 1
- Wyświetlenia
- 4267
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- GNU General Public License v2.0
Inspired by @OloDeepdelver’s designs, I redesigned my previous model to support hot-swap sleds. Like the earlier version, this design accommodates up to 6 drives (3.5" or 2.5") and has been optimized for both “back-to-front” and “bottom-to-top” airflow.
The cage is reinforced with four M6 threaded rods to improve overall rigidity.
A STEP file is included.
Print settings
Print flat on the build plate without supports. The total filament usage should be just under 500g.
Parts
2× ear.stl
6× half1.stl
6× half2.stl
BOM
2× M6 × 254 mm threaded rods
2× M6 × 222 mm threaded rods
4× M6 nuts
12× M3 brass inserts or M3 nuts
12× M3 × 20 mm screws (for inserts) or M3 × 25 mm screws (for nuts)
6× SATA adapters (as shown)
6× Dell PowerEdge HDD sleds (as shown)
