HDD cage for 10 inch rack - hot swap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modular HDD cage for 10 inch rack with support for hot swappable Dell sleds and plenty of airflow
- Rating
- 5 / 5
- Likes
- 144
- Downloads
- 300
- Makes
- 1
- Views
- 4,267
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- GNU General Public License v2.0
Inspired by @OloDeepdelver’s designs, I redesigned my previous model to support hot-swap sleds. Like the earlier version, this design accommodates up to 6 drives (3.5" or 2.5") and has been optimized for both “back-to-front” and “bottom-to-top” airflow.
The cage is reinforced with four M6 threaded rods to improve overall rigidity.
A STEP file is included.
Print settings
Print flat on the build plate without supports. The total filament usage should be just under 500g.
Parts
2× ear.stl
6× half1.stl
6× half2.stl
BOM
2× M6 × 254 mm threaded rods
2× M6 × 222 mm threaded rods
4× M6 nuts
12× M3 brass inserts or M3 nuts
12× M3 × 20 mm screws (for inserts) or M3 × 25 mm screws (for nuts)
6× SATA adapters (as shown)
6× Dell PowerEdge HDD sleds (as shown)

