Counting matching models…
The mountig holes are for 3Ms heated inserts and a short m3 screw for the hot swap mounting point. Just slide the Case with the sensor underneath the screw and tighten it down. i also used a long m3 screw for stabilizing the Bracket for…
Magnetic hotswapping adapter: This adapter allows for quick swapping of the pens during multicolor prints. It uses 20mm 11mm 2.5mm Neodym magnets. Insert them after the print with double sided tape.
This is a hotswap socket for MX style switches allowing you to not permanently solder in switches for handwired mechanical keyboard builds. The socket goes well with the handwire guard (shown in the middle): If you use 1.0mm diameter wire…
Magnetic hotswapping adapter: This adapter allows for quick swapping of the pens during multicolor prints. It uses 20mm 11mm 2.5mm Neodym magnets. Insert them after the print with double sided tape.
https://qrcode2stl.printer.tools use this link to generate qr code or some other similar website. IF the hexagons don't fit properly, it's most likely due to thermal expansion or thicker/thinner walls. Just resize by 0.5 percent and…
This is a hotswap socket for MX style switches allowing you to not permanently solder in switches for handwired mechanical keyboard builds. The socket goes well with the handwire guard (shown in the middle): If you use 1.0mm diameter wire…
This is a hot-swap bay designed for a triple CD drive bay, compatible with a SATA backplane from AliExpress. The unit consists of two halves that house the PCB, which slots neatly into place. The halves are secured using four connecting…
Fully functional hotswap drivebay for 2.5" SATA HDD/SSD. Compatible with usb sata adapter. Locking pin is printinplace. I made this for a larger rack-mount rpi project, so the outside dimensions don't fit any standard 3.5" or 5.25" bays.…
Adapts the Lian-Li hot swap hard drive bay into the back of the O11D EVO RGB where the original hard drives mounted. Uses six of the mounting screws from the hot swap bay, and reuses the screws from the original hard drive mount on the…
I wanted a plate to put Kailh Choc switches and hotswap sockets into for a small project with a Raspberry Pi, but I couldn't find anything that suited my needs. I love mechanical switches and hope to use them in many projects requiring…
machine translation I would be glad to hear your opinion about this model. This model is intended for use as a mounting socket for a mechanical mx/choc switch. It is recommended to use this model in large assemblies, for example, modeling…
This is the project (not from me): dumbpad (hotswap RGB edition) here you can optionally use M2x10 cylinder head bolts (10= thread length) i recommend soldering the led's to the spicers in the housing. (so that it then simply works…
Perfect DIY Case for this nice little Mainboard. Perfect for Building a nice Firewall with PFSense or IPfire. 4gB Lan Ports and a nice amount of speed and flexibility. You just need an old Nortbridge cooler or something like that.…
10 inch Hotswap Drive Bay for Mounting up to 8 2.5" SSDs in 1U. SSDs can be up to 8mm thick (Some slim HDDs should also work). 8 SATA connectors with Cables oder 8 SATAto SATA Adapters (see last two Pictures) can be pushed in the back and…
A simple clip-in internal bushing for any (mainly cardboard) filament spools. It's works with spools with an internal hole diameter of 55mm . Like spools from Polymaker. I recommend printing the part in PETG because it has lower friction…
I had some parts lying around at home and wanted to try to design a handwired keyboard from scratch. As I only had devcards and no pro micros etc lying around, I designed the keyboard around that, and tried to make it look real…
https://qrcode2stl.printer.tools use this link to generate qr code or some other similar website. IF the hexagons don't fit properly, it's most likely due to thermal expansion or thicker/thinner walls. Just resize by 0.5 percent and…
Did you also make the mistake of buying a Rosewill RSV-4412 server case or RSV-SATA-Cage-34 panel-mount case? If so, did you realize Rosewill doesn't sell spare disk caddies? If not, did you notice how flimsy the sleds are, and how…
This is a hotswap socket for MX style switches allowing you to not permanently solder in switches for handwired mechanical keyboard builds. The socket goes well with the handwire guard (shown in the middle): If you use 1.0mm diameter wire…
I finally finished my long journey. If you are interested, please let me know in the comments. Then I will prepare a BOM list and assembly details.
Triptych Battle tops are a collection of Tops, Blades and Tips that let you build and customise your own battle tops! Swap out different blades and tips to customize spin stability weight and contact points to build your ultimate battle…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/0BtRVPgUUya Category: R/C Vehicles
A case for the dumbpad (hotswap RGB edition) providing a full enclosure with a slight angle. The top cover must be printed upside down with support enabled. All other parts can be printed without support. No screws required. Self-adhesive…
This design fits a standard 80mm computer fan into the middle chassis fan slots in a SuperMicro CSE-846. I designed this so I could replace the case's loud factory fans (part number FAN-0127L4). Note that the fan can be oriented either…
Print two clips, and connect them using M3 screws (8mm length). Holds slightly oval cables, 8.2mm x 7mm. The cables this was designed for are called “Vattud Magnetic Charging Cable 4-Pack”, found on Amazon.…
After removing a bunch of keys I didn't like how it left the hotswap sockets open and all exposed. Whipped up this quick and simple model, which I'm very pleased with. I suppose it really comes down to how well your printer is calibrated.…
A simple and affordable replacement of the stock RatRig V-Core3/3.1 motor cages that allows fast and easy belt replacement, without the need to unmount the entire motor assembly and (if legacy enclosed) the lid and other frame components.…
A simple and affordable replacement of the stock RatRig V-Core3/3.1 motor cages that allows fast and easy belt replacement, without the need to unmount the entire motor assembly and (if legacy enclosed) the lid and other frame components.…
Changelog: v1.2 2023-04-07 removed all STL files from previous versions added optional zip tie hole to the back cover so the power cable can be secured (no sharp corner there, too) unified front cover (fits now every Raspberry Pi)…
Aurora Lily58 spacers for low-profile case with mx hotswap sockets. If your keyswitches are not 100% pushed into their hotswap sockets you can use these spacers to push the entire PCB closer to the top plate holding the switches. Spacers…
Just print parts 1-3 with something that doesn't easily melt (TX easily gets to 85°C), clip the TX on the bottom 20mm bolts, insert the antenna from above and connect it. Then glue the top plate to the bottom and then the cam holder on…
Holds Kailh choc v1 switches tightly. If you find that the hole is too tight, adjust the inner square hole to 13.7mm.
Adapter for mounting SSDs in existing 3.5" server hotswap bays that has some sort of bottom support. Tested on Dell, HP/HPE old-style and HPE “smart” -carriers. Use 3 of the original screws to fasten the adapter Insert the two small pegs…
The adapter allows you to mount a 2.5" drive in 3.5" server bays. The adapter does not increase the height of the mounted disk, which allows for trouble-free hotswap installation.
Background: Due to my house from the 60s, i could not buy a new holder for the paper at the bathroom. So instead of an old fiddling design I got some inspiration from the interwebz and made this. And… i think that my measurement isn't…
i wanted to have a Hotswap Bay for SSDs without using the 3.5" Trays for HDDs so i used the SFX Mount for a 4 Bay SSD Hotswap bay. This only works if you use a PicoPSU or similar because you cant use any SFX PSU anymore. The Cable used:…
Simple macropad that runs on a Raspberry Pi Pico and and can fit Mill-Max 0305s, making it hotswappable.
A vinyl cutter attachment for a 3D printer needs to have two key features: Spring tensioning to compensate for bed level issues (You can never get a 3D printer bed as flat as a Cricut or Silhouette cutting area) A very snug fit for the…
Abandonware. It might get some info later but for now here we are There are 2 versions, a flush mounted version and a version that is about 15mm deeper(setback). Either way, print one of each SideL,SideR,LatchRail,SmoothRail,Backplane.…
This is a block that can be slid into the strum switches housing to house kalih MX hotswap sockets. I don't like soldering to the tiny pins so this instead gives a bigger area to solder as well as the ability to hotswap strum switches.…
A laser mount I designed for a cheap half-watt (Questionable if this is accurate) 405nm cutting unit I snagged on AliExpress. Still working out the bugs in making the unit as a whole work as expected, but the mount itself is good.…
Plate using outemu hot-swap socket holders to make a handwired hot-swappable Mechanical Keyboard Numpad m2 screws hold the sockets in printed at .3mm layer height
A simple drive bay for 4 Dell 3,5" LFF HotSwap HDD caddys. The SATA/SAS Connetion at the back is not mounted, the rear of the HDD is exposed to plug in manually. Fits a 120mm Fan on top for cooling Printing orientation: on its "back" with…
This hotswap bay is going to require a few fasteners, all m3 of various sizes. The hardes thing to find is going to be the sata passthrough which bolts down to the back of the tray. These things are fairly standard and the bolt patterns…
SO… I am sitting here typing this on the keyboard that is featured here. Definitely isn't perfect but it works fairly well and was fun to build. In order to build this, you will need 2 of the TopHousing and BasePlate with 1 each of the…
This is bottom plate only case for the Sweep LP keyboard (choc v1 hotwap sockets). This takes inspiration from the TOTEM case that was remixed in TOTEM Redux . I printed the PCB from the GitHub repo, however it appears the same PCB can be…
UPDATES : 29/09/2024 : Vial file “big_num_vial.uf2” added. ____________________________________________________________________ Context: BigNum is part of a series of projects I've recently started, all focused on custom mechanical…
