2.5" HDD / SSD to 3.5" HDD Adapter (Bottom Mount)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows you to install a 2.5" drive where a 3.5" one mounts using the bottom screws.
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 170
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This bracket allows you to mount a 2.5" drive where a 3.5" one normally goes. I'm using it inside a Fujitsu Esprimo E400 case but it's a standard part. It'll fit in many other cases.
You'll need 8 screws; 4 to mount the bracket and 4 to mount the drive to the bracket.
Tested in PLA, printed at a 0.2mm layer height with 20% grid infill. It is working with no issues.
If this model is useful to you, consider checking out my YouTube channel (https://www.youtube.com/@RepairWins) I cover electronics repair, electronics modding, the odd DIY project, woodworking (if you stand a mile away and squint) and much more.