P
Printables
Paintball Caddy Lid
I made this lid because I lost the stock one, this one is made out of TPU so it is flexible and works just like the stock one or even better, because TPU is stronger.
Wyniki wyszukiwania: caddy
Liczymy pasujące modele…
P
Printables
Fractal Define R5 HDD Tray/Caddy
Introducing the Fractal Define R5 HDD Tray, designed specifically for the Fractal Design R5 case. This model combines multiple designs to ensure a perfect fit, allowing users to utilize rubber mounting hardware for optimal vibration…
P
Printables
HeyGears Reflex RS Print Bed Holder Drip Caddy
This is here only for legacy reasons. Please use the updated design: https://www.printables.com/model/1109161-heygears-reflex-rs-print-bed-holder-drip-caddy A smal holder for having the print bed in an angle for the resin to run off your…
P
Printables
Minimalist tv remote caddy
Simple remote caddy, but can be used for anything I opted for fuzzy skin mode for a textured surface
P
Printables
Cord Caddy for Presto griddle
Designed this to hold the cord and controller for our Presto brand griddle. May work for other brands too. I used double-sided mounting tape to stick it to the inside of my cabinet door where the griddle is stored. Could also use a…
P
Printables
2.5 SSD to 3.5 HDD caddy adaptor
hard drive adaptor to fit a 2.5 inch SSD or laptop drive into a 3.5 inch desktop PC bay just added mk2 which has holes for mounting flat :) hope you find i useful Also on thingverse but I like here more 😋
P
Printables
DeWALT Battery Caddy / Holder 6-Pack
This DeWalt battery holder is designed for convenient carrying of all batteries to the work site. It is versatile and prints easily, no support is needed, only two M4 screws with nuts from 12mm to 15mm in length are required. Print…
P
Printables
Fujitsu Esprimo P720 2.5" caddy
The difference between files is 16mm in length, as 90º doesn't need as much space as flat SATA cables DISCLAIMER: THE PHOTOS REFLECT THE ORIGINAL DESIGN. THE .STL FILES ARE SHORTER AND WORK AS EXPECTED. I'M JUST LAZY AT THIS POINT TO NOT…
P
Printables
Card Stands & Caddy
These Card Stands are ideal for any card game that requires you to hold a lot of cards (Uno, Five Crowns, etc.) or for people that have trouble holding cards (children, elderly, arthritis, etc.). The Stands and Trays efficiently nest…
P
Printables
Prusa Build Plate Caddy
I made this caddy to hold 4 Prusa Core One, MK4+Variant, and MK3+Variant build plates, with keyhole mounts for attaching it to the side of a desk or wall with M5 hex-head machine bolts. The plates are staggered so it's easier to grab each…
P
Printables
Original Xbox HDD/SSD Caddy
This is a custom HDD caddy for the original Xbox. Transferring files over FTP is capped at 10MB/s, which can be painfully slow. I wanted a faster way to move files by taking the drive out and connecting it directly to my PC. The problem…
P
Printables
Custom Kitchen Caddy
Just learning Fusion so creating random things for my house of use. Created this kitchen caddy to go on a draining board with a drainage hole in the bottom to stop gross water building up! The separator allows you to segment the caddy at…
P
Printables
Dell Optiplex Micro 15mm HDD Caddy
The factory HDD caddy for the Dell OptiPlex 9020 Micro only fits a 9mm drive. This is a custom version designed to fit a 15mm drive. I’m reuploading this to Printables so more people can find it, as it took me three hours to discover that…
P
Printables
V8 Valvetrain Tray - Caddy
I needed a tray to organize my valvetrain and didnt want to buy one...super simple design simply made to org intake and exhaust valves and springs. These measurements are specifically for an LS1 but will work for plenty of other motors.…
P
Printables
Slim Caddy for desk
This is what I made using fusion 360 my first time. Let me know how it works and if you like it.
P
Printables
Elegoo Centauri Carbon Tool Caddy
I wanted a simple and quick to print tool caddy, that can hold all the included tools for the Centauri Carbon printer. Plus a pair of flush cutters. The tools are organized, with the most frequently used tools towards the front. The…
P
Printables
Geometric Coffee Syrup Caddy
This coffee syrup organizer blends a modern aesthetic with effective functionality. It is designed to save space beside an espresso machine. The frame features Voronoi cutout patterns on the sides and back, adding an artistic touch. It…
P
Printables
Tea Caddy, Pot with Lid
Please be aware that food safety is a complex topic and if you are storing food in 3d printed objects, you do so at your own risk. How to print (recommended) Scale: 100% Nozzle: 0.6mm All extrusion widths: 1mm All layer heights: 0.25mm…
P
Printables
HP DL380 G4 Ultra320 SCSI Hard Drive Caddy
This is a 3D-printed hard drive caddy designed for the HP DL380 G4 2U server, specifically for Ultra320 SCSI drives. It features a snap-fit design with a front handle for easy installation and removal. This custom caddy is a great…
P
Printables
Simplehuman sink caddy's brush holder replacement
Fits well and holds the brushes' weight. Printed with TPU, 0.25mm layer height, 0.4 nozzle, and 15% infill. I might also recommend adding holes to the base with the slicer for water to drain better, but I didn't and so far it is working…
P
Printables
Bedside book caddy
There are people in this world that still read books. There are also people in this world who sleep. For the small fraction of people that do both, I have an amazing solution for you. The bedside caddy. It is mounted between the bed frame…
P
Printables
Yet Another Gridfinity Deburring Tool Caddy
I wanted my caddy for a deburring tool to be stackable, and make it easy to grab the tool out of the bin. None of the existing holders fit the bill, so I made my own! This one is good enough for me, but on revision I would: Increase the…
P
Printables
GoPro 13 Black Gridfinity Caddy
Gridfinity caddy for GoPro 11/12/13 Black and 2 batteries. There are other gridfinity designs for gopros, but I had a few requirements so I made my own: Stackable 6 units high to match other bins. It just barely fits! Can charge in place
P
Printables
Lipo Battery Voltage Tester / Voltage Buzzer Angle block / Caddy / Lipo Alarm
. . . If I saved you time and effort and you feel inclined to throw me a couple bucks for the I spent modeling and actively testing this model my Venmo is (Alex-Garza-48) Thanks !
P
Printables
Shower Caddy ( for soap or small bottles)
Something i whipped up to fit my specific situation as we have plenty of bottles in our bathroom but not enough space. so now i can store some soap or something up above in the caddy and that also makes cleaning easier for us. Maybe…
P
Printables
Remixed Simplehuman Shower Caddy Shower Head
I really liked the original SimpleHuman Shower Caddy Shower Head holder, but it broke the first time I tried to attach it. I modified the original design to attach using 4 zip ties instead of the friction/snap fit. While I had the…
P
Printables
Fujitsu RX1330 (M5) 3.5" caddy with screw holes
The model provided by @Poty_1688301 already worked great for mounting 3.5" HDDs in my Fujitsu RX1330 M5, yet I wanted to be able to switch between 3.5" and 2.5" drives without printing separate caddies. Thus my remix adds screw holes for…
P
Printables
HDD/SSD caddy trays Chenbro server Universal 2.5/3.5inch
Works with SK33502 Chenbro. If. If you need to use 3.5, simply cut the hashed lines (in red in the pictures) to unlock the 3.5 capability. Hopes this helps someone 👍. NAS/SAS/SATA/SSD/HHD/Storage Server. Edit 3/2026 V2 uploaded since v1…
P
Printables
Desk Organizer - Minimal Multi-Compartment Pen & Supply Caddy
Design Concept The Desk Organizer is designed with a minimalistic approach, featuring clean lines and a modern aesthetic. Its multiple compartments offer convenient storage for pens, notes, and other office supplies, keeping your desk…
P
Printables
Desk Organizer - Honeycomb Desktop Caddy
Design Concept The Desk Organizer is inspired by a honeycomb structure, offering an aesthetic appeal paired with functionality. Its geometric design allows for neat storage with multiple compartments while adding a modern touch to your…
P
Printables
30mm x2mm magnet caddy
A small caddy that stores 13 30mm x 2mm magnets. The caddy keeps the magnets separated to reduce damage and allow them to be removed without the whole stack coming out. It fits in Uline S9934 4oz wide mouth jar. The space between the jar…
P
Printables
Trays for 4 3,5HDD Tray Caddy - 19' 3U Rack for Modular trays
Modular 3U Trays for 3,5HDD Tray Caddy Screew Sata connector at the back Rack Disk on Amazon Rack Disk on Ali Express Sata Connectors
P
Printables
Wheel Throwing Tool Caddy
Tool caddy to hang on the edge of a splash pan. Works with Shimp-VL wheels or any 19" splash pans. Dividers are removable and work well if you use 2. One compartment for a rib, and the other 2 for thinner tools such as a needle. Side…
P
Printables
HPE proliant gen9/8 drive caddy - 727695-001
Easy to print and assembly disk caddy for gen8 and 9 HPE proliant. (Possible 10, 11 and 12. But I can not guarantee compatibility because I don't have access to anything else than 8 and 9 gen.)…
P
Printables
Qidi Q2 280mm Build Plate Caddy (5 plates)
for 280x280 Qidi Q2 5x bulid plates dowel pins added mounting holes added multicolor option you need only support for the M3 counter holes you need also: 8x M3x20 mounting option: 4x wood screws 3mm
P
Printables
RPG Token Caddy
This is a very basic organizer to hold a set of Lazy Monster Tokens as described by Sly Flourish . My original thought was to make something with a lid or that otherwise retained the tokens for travel but I got busy with other projects…
P
Printables
Generic SATA Adapter Bracket for OG Xbox Caddy
Specifically made for the NFHK EP-014 adapter, however should work with other similar models that use the same layout/dimensions. Tested with a 1.4 Xbox and printed using Elegoo Rapid PETG in 0.2mm.
P
Printables
Unifi UNAS-2 2.5 Solid State Drive Adapter Caddy
Unifi UNAS-2 2.5 Solid State Drive Adapter Caddy Designed for SSDs 7mm thick. You will need 2 M3x4 SHCS bolts per drive. Pay attention to make sure your connector orientation is correct when mounting drive. If you need something for a…
P
Printables
Centauri Carbon Tool Caddy w/ Skadis
Inspired by @dinkdoodlez tool caddy. I really liked the small footprint that model has. I started from scratch, here are the significant changes I made: Tool holders (drivers and allen keys) have indents for better retention Skadis hooks…
P
Printables
Dell OptiPlex SFF 3.5" to 2.5" drive adapter for drive caddy
I used this in both an OptiPlex 7010 SFF and a 3020 SFF but it should work in other similar computers. The outer 3.5" holes are for the pegs in the 3.5" blue drive caddy thing and the inner ones for the 2.5" drive. The clearance holes are…
P
Printables
Dell Latitude E5440 Laptop Hard Drive HDD Caddy Caddie
Printed in a Prusa mini+ Print settings: 0.20mm QUALITY PLA filament Supports: None Infill 15% Used Filament 1.92gr print time 14 min
P
Printables
Dell Latitude E5430 Laptop Hard Drive HDD Caddy Caddie
Printed in a Prusa mini+ Print settings: 0.20mm QUALITY PLA filament Supports: None Infill 15% Used Filament 1.92gr Printing time 14 min
P
Printables
caddy to add 2 full size 3.5" HDDs to dell optiplex MT
These brackets allow you to add two full size HDDs to dell optiplex 7040 MT. NOTE: o must first rmove the piece of metal fom the front of the case that sperates the HDD bay from the optical dive bay. UPDATE: the fist version o fthe…
P
Printables
3.5" HDD Rack / Caddy / Holder (8 drives)
Great original design by npopson but I needed to fit 8 drives in my array
P
Printables
Supeior DeWalt 6x Battery Caddy
A battery caddy for the DeWalt 20V & Flexvolt battery platform. Easily carry up to 30 pounds of batteries onto the jobsite. Load and unload with ease. Optional accessory trays lets you include up to 54 full size 1/4" driver bits & other…
P
Printables
Sink caddy for kitchen or bathroom soap sponge or cloth
A little sink caddy or tray for whatever use you need I used a wood filament for the feet :)
P
Printables
Darts Caddy (non MMU)
Simple darts caddy to store your darts. No MMU required. Print Order: start with WHITE swap to GREEN at layer 25 (5.0mm) swap to RED at layer 27 (5.40mm) swap to BLACK at layer 29 (5.80mm)
P
Printables
colored pencil sliding caddy container
will hold 10 of the pencil caddies, has 2 locking tabs
P
Printables
Steel Chopstick Caddy
I printed TPU 95A with 2 walls and 15% infill. The holes are very slightly tapered and designed for a very snug fit when printed in TPU. You may also find it works okay with other filaments. Measuring your actual chopsticks and resizing…
P
Printables
Dual Hard Drive Caddy (3.5")
Needed a hard drive caddy for a NAS I was building. Couldn't find anything that fit the way I needed. Modelled in Inventor and Fusion 360. Needs: 4x M4x8mm screws (no need for nuts, tolerances are set to create threads) 2x Dabs of glue…
P
Printables
Bath & Shower Caddy - Manscape Razor Holder
This is a simple, lightweight, bath and shower caddy. May be left on shelf or wall mounted with adhesive strips. Sized to fit Manscape razors and accessories. I printed it in TPU to make it unbreakable, but any filament should print well.
P
Printables
Kitchen Caddy
I could not find something that looked decretive and held all these things , So i made this. It has slope for draining and there is a gap under all the holes to let it drain towards the sink. Prints good depending on your machine and…
P
Printables
joseph joseph food waste caddy lid
Food waste caddy lid created to replace our one which must have been thrown out. Made with petg 3 walls, 1mm top and bottom layers and gyroid 25% infill for a bit of strength.
P
Printables
HP Elitedesk 800 G* SFF - HDD Caddy Double
It's just a simple redesign of the original to meet my requirements.
P
Printables
Expresso Shot Glass and Distribution Tool Caddy
I can't stand the way the coffee from my grinder always falls on my counter and the wet shot glasses make a mess that I gotta wipe up. This thing aims to fix both. The shot glass portion has risers so if you put a wet shot glass in,…
P
Printables
TCG Sleeve, Toploader, and Semi-Rigid Storage Caddy
A storage holder for your Sleeves, Toploaders and semi-rigids!
P
Printables
Under cabinet mounting bracket and cable caddy for a Wanptek GPS3050 power supply
The Onshape files can be found here: https://cad.onshape.com/documents/df0b3f0a4026fec2714bccaa/w/c6e1445203c64036d594bf2b/e/e127d6d1c369c972726e20af?renderMode=0&uiState=6988c5b4e200f073ca41870f Feel free to use or modify as you see fit.…
P
Printables
Keter CaddyXL Organizer T- & X-Inserts
The T- and X-Inserts will fit the Keter® CaddyXL organizers. I do not know if these inserts will fit the CaddyL organizers as well. The X-insert fits into one square space. For optimal stability, place a small piece of double-sided tape…
P
Printables
Parametric Playing Card Box with Caddy – Fully Customizable
This is a fully parametric card box and caddy . I have been making a few box's for different card sets and got annoyed editing each file to fit, so I decided to start from scratch with a parametric model. What this means is that you just…
P
Printables
DeWALT Battery Caddy / Carrier / Holder 6-Pack - Expanded
Remix of XYZ.Thought's nice caddy to make it slightly wider, add a base with some drainage, and stretched the handle designed for convenient carrying of batteries and accessories to the work site. This model is not perfect but functional.…
P
Printables
Customizable Two-part epoxy caddy with mixing pots
Caddy to hold two-part epoxy dispenser and 10 mixing pots Category: Tools
P
Printables
Cricut/Craft Tool Caddy
My wife got her Cricut Explore 4 and purchased some additional tools. She asked me to make something for her to store them so I came up with this. It's easy to print, no supports needed.
P
Printables
12 Large Egg Dispenser / Caddy
Holds 12 large eggs and dispenses one at a time - real model pics coming soon
P
Printables
The "Helix Column" Minimalist Pencil Caddy
Elevate your workspace with the Helix Column Pencil Holder , a fusion of industrial geometry and functional art. Unlike traditional solid cups, this 3D-printable organizer features an open-ribbed design that showcases your stationery…
P
Printables
MotoCaddy Drinks Holder
I used PLA-CF with 50% infill. Laid on it's back with Tree supports.
P
Printables
Prusa Nextruder Nozzle caddy for Honeycomb Storage Wall (HSW)
This is a simple holder for Nextruder Nozzles on the HSW. It fits five nozzles in their cases. Print as oriented in the STL, any nozzle size and layer height will work. You will need a bit of support at the bottom of the hex connector.
P
Printables
Desktop 3D Print Tool Caddy
Needed a tool rack that housed my tools, I have a few different pliers, cutters, glue, brushes, etc, and could never find a rack to suit me. So, what do you do, you make your own. Note this is a version one and I will be improving it over…
P
Printables
Weighted Paint Brush Caddy with Drip Tray
Features Weighted - if you choose that option. There is an internal cavity designed to hold 12 1/4 oz wheel weights. See links below for purchase. Offset Heights - The back holder is 2mm higher than the one close to the drip tray.…
P
Printables
Ribbed Cutlery Organizer Caddy
A clean, sturdy cutlery organizer designed to keep everyday tools in order without looking “kitchen-y.” The shape is compact but roomy, with three separate sections for forks, spoons, knives, chopsticks, or even coffee tools and straws.…
P
Printables
Photo Caddy Insert - Roll for it! Deluxe
Roll for it! Deluxe insert for 4x6 Photo Caddy based on ManicResin's Roll For It Deluxe Organizer . You will need to use the Dice Tube and the Deck Sleeve from the original model.
P
Printables
Target Brightroom Storage Caddy Divider
I bought Target's Brightroom Storage Caddy and wanted two additional dividers so I whipped this up. I used E6000 to glue (applied kind of like caulk) the dividers into place. They feel quite solid - I'd as just as solid as the included…
P
Printables
2.5" SSD/HDD/U2 drive caddy - Stackable, tool-less, no supports
This model is for a stackable drive caddy that fits 2.5" drives, be they SSD, HDD, or U2. The model prints with no supports, and fit onto 2.5" drives without screws. You can then stack the caddys/drives for organization. Included are 4…
P
Printables
Shower Caddy
This should be printed on its side with the support bar on the plate. I printed it with a 0.4 mm nozzle, .2 layer height and 15% infil. The default size is the biggest you can get on a Prusa standard size plate (250 mm x 210 mm).
P
Printables
Modular Desk Organizer – Tool Caddy for 3D Printing Tools & Workspace Storage
I do most of my 3D parts cleanup/assembly while sitting on the couch in the living room. I needed an organizer to put on the coffee table so I don't have tools scattered all around. It has spots for the tools I seem to use the most. I'm…
P
Printables
Tool-less 3.5" Hard Drive Caddy for Supermicro Server 2.5 HDD/SSD Adapter
Modified Front - Added Cooling holes
P
Printables
Makita 12v Max Battery Caddy
This is a battery storage caddy for the older-style Makita 12v Max batteries (e.g. BL014 batteries). The batteries fit snug but do not lock into the caddy. Note: This is not for the current 12V Max CXT series batteries will not fit.
P
Printables
Ice Fishing Electronics Caddy
I wanted a simple caddy to combine my ice fishing electronics. This mounts the Striker 4 fishfinder with threaded inserts. There's a cup to hold an ice fishing transducer. It all attaches to a small ammo can that holds my battery. I also…
P
Printables
Can Caddy
This can caddy can hold 3 cans per level, but if you print the top, it can hold a recommended 6 cans. The way I designed it, you can continue to print the top for even taller stacks of cans. Superglue or similar recommended for connecting…
P
Printables
SC846 Dual U.2 NVMe Caddy — Two-Piece Skeletal Design
Two-piece parametric OpenSCAD caddy holding two Samsung PM1733 (or any 15mm U.2 2.5") NVMe SSDs in a Supermicro SC846 chassis, using twang's HDD base mount rail system. Boolean-split at the drive boundary so each half prints flat without…
P
Printables
1U 10" Dual 3.5" HDD Caddy Holder
What is it? Its a 1RU dual HDD caddy holder for 10" server racks to support (x2) 3.5" hard drives in a hot-swap configuration. Can be used for modular HomeLab NAS RAID / JBOD setups. HDD Tray Caddy slide and clicks into place along rails…
P
Printables
Drink Caddy
Great for handling the times when you need to carry more drinks than you have hands.
P
Printables
Desktop Tool Caddy Organizer
I wanted to organize the tools I like to have handy at my workbench when I build 3D printers, models, watches & clocks, and electronic PCBs. So I decided to design a custom 3D printable tool caddy. This is the result. It just fits on the…
P
Printables
Sink Caddy
There are (2) base caddy depend on what's your bevel sink Basewithfeet (Drop in sink) Basenofeet (Undermount) There are (3) top caddy for you to choose for your need. Top01 Top02 Top03 No support needed for the Top, the Base support…
P
Printables
Magnetic Knitting Notions Caddy
I designed this simple magnetic caddy to keep my most used knitting tools close at hand, especially the ones I grab with one hand when I’m trying to catch a dropped stitch. It also helps corral the tools I always seem to lose in the…
P
Printables
Bathroom caddy
perfect for organising the things you use daily while having them cute and easily accessible.
P
Printables
Kitchen Basics - Sink Caddy
Print the base on its side so that the layer lines are aligned with the drain channels. Add picture frame bumper feet if desired. A brim may be necessary. The brush support clicks into place. No glue needed.
P
Printables
Caddy for Flashforge 5M Pro build plates and nozzles
Remixed and combined build plate and nozzle holder for Flashforge 5M series, specifically for 5M Pro.
P
Printables
Dell PowerEdge 2.5-inch to 3.5-inch caddy adapter
Can print without supports. One side has small nubbins to slot into the caddy's 3.5-inch screw holes. The other side screws into the 2.5-inch drive. On the opposite side of the caddy you can use the caddy's own screw holes to screw in the…
P
Printables
Caddy for salt & pepper grinders
Thanks to download & ❤. This caddy is designed to fit these salt & pepper grinders: https://www.printables.com/model/1611093-salt-and-pepper-grinders-with-tpu-knobs If you're liking these colors, the filaments are Prusament PETG pistachio…