Single, Double and Triple Remote Control Caddy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remote control caddy for screwing to the side of a desk, end table or nightstand.
- Ocena
- 5 / 5
- Polubienia
- 67
- Pobrania
- 634
- Wydruki
- 4
- Wyświetlenia
- 1363
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
These models were inspired by the Remote Caddy uploaded to Thingiverse by TheScarfNinja. Others have uploaded single and triple remote versions of that design but they were much larger than I needed.
This design will hold a remote with a maximum width of 60mm and maximum depth of 30mm. The overall depth of the model is only 35mm so it should fit nicely between a bed and nightstand. Each section has a hole for a #8 truss head screw. Two screws per segment would be overkill but should allow for different mounting locations and easy remixing. If you prefer less material usage or quicker print times each model has version with a hexagon patterned side or a solid side. Both versions have the hexagon pattern on the bottom so they don't fill with debris.