P
Printables
Dyson Fan Remote Holder
I used 3M double sided tape to mount on the fan. Printed in PLA 210/60 20 infill, no support.
Wyniki wyszukiwania: remote
Liczymy pasujące modele…
P
Printables
Paul Neuhaus remote holder
A simple holder for the remote control of Paul Neuhaus lamps. Print Settings Printer brand: Sovol 3D Printer: Sovol SV06 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament brand: Joyo Filament color: black Filament material: PLA
P
Printables
Rockford Fosgate PLC-1 Remote Bass Knob Holder Plate
For installing the remote bass knob from Rockford Fosgate (only tested for PLC-1) to your car with double sided tape (2cm) Print with (tree) supports as is. German: Zum Einbauen des Remote-Bassreglers von Rockford Fosgate im Auto mit…
P
Printables
Minimalist tv remote caddy
Simple remote caddy, but can be used for anything I opted for fuzzy skin mode for a textured surface
P
Printables
Remote shutter holder
It is made to maintain the shutter box from an other project onto a tripod. It is print in place, with supports. It uses an M6 nut (minimal length is 16mm) and a butterfly nut. Pipe / Tube diameter is 28mm.
P
Printables
Wall mount for Fujitsu AC remote
A simple loose fitting, wall mountable AC remote holder for Fujitsu ACs. Mountable using double sided tape or using two sunk head screws. The mount was designed in Autodesk Fusion 360.
P
Printables
Remote for Arduino Camera Shutter
This is case was designed to embed all the components needed in the making of a camera shutter by @jamesskelton. Link to his github project page : https://github.com/hackaninstant/Servo-Shutter The box embed : two 3,7v lithium battery for…
P
Printables
Magnetic Case for Apple TV Remote - Model A2540 (8x3 Magnet)
Changed magnet size to 8x3 because that's what I had.
P
Printables
Case for Samsung Remote
It's a remix of two great models into one even better Print vertically and use brim for better adhesion. For a better look, draw a seam inside the model in Orca slicer. I prited mine in PLA.
P
Printables
SideClick Chromecast with Google TV Remote and Blank Cover
I had a sideclick that was used with a roku but changed over to Chromecast with Google TV and I didnt want to buy the google remote version of the sideclick so i made one. Its a two part build with the blank side that can be used if you…
P
Printables
RGB Remote Stand
RGB Remote Stand Organize all of your RGB Remotes with this Print! Comes with a 4x , 2x and 1x Remote Holder!
P
Printables
Christmas Tree Remote Holder PDT-005
Holder for the PDT-005 Remote that comes with a pre-lit Christmas Tree. Two versions, one with a plain back for command strips and another with a couple mounting holes 20mm oc. No supports needed, print on top edge.
P
Printables
Sony TV Remote Holder RMT-TX102U Wall mount
Sony TV Remote Holder TX102U (18mm x 48mm) wall mountable using screws or poster size command strips. No supports needed, print on end as pictured. Holes 40mm spacing.
P
Printables
SDL Remote WX Solar Weather Case
** 9-Mar-19 Have tested with a 6000mAh battery and works fine. Removed the thread for the Thunderboard hole and changed it to support a UV Sensor stalk. I have removed the Thunderboard from the Remote unit back to the base unit. 18-Feb-19…
P
Printables
Champion Skeet Thrower Remote Cover TPU
This is a wireless remote cover the champion whirlybird skeet thrower. The cover is mainly to give the remote a lanyard hole so the remote can hang from your neck or belt. Printed with TPU using 5% infill for softness.
P
Printables
JVC Remote Battery Hatch
So, this is just the battery hatch for an old JVC TV remote… I believe it's the JVC RMC384. I got one and the hatch was taped on, so I thought I'd model a replacement. It fits perfectly, best to print in PETG for strength on the tab. I…
P
Printables
Stunt Elf remote control battery cover
Nothing special to add here, I gave it support enforcers with below settings underneath the protruding pins: If you would like to support me - you can buy me a coffee :) Please try to share photo of your print <3 Check out my other models…
P
Printables
Remote Holder for Skadis/SKÄDIS
This is a holder for creative remote control for speakers. It fits together with this universal holder for skadis https://www.printables.com/model/635620-skadis-skadis-universal-peg printed on prusa MK3.5 with 0.4mm nozzle 2mm layer
P
Printables
Gridfinity inferred remote holder
2 versions of a holder for a inferred remote for the gridfinity system
P
Printables
Arcchio Light Remote Wall Mount
Basic wall mounted holder for an Arcchio (or possibly other generic) IR remote. Useful for when the remote is dangling around and you don't want to lose it. Screw holes are 6mm wide. Printed in PLA on an Ultimaker 2.
P
Printables
X-Sense RC01 Pro remote holder
Because I wanted to have my X-Sense RC01 remote in an accessible location where I can easily grab it, I created this holder for it. It has a little indentation on the back to fit some double sided tape (my tape is 1.0mm thick, so I made…
P
Printables
Samsung remote stand with google chromecast remote
For Samsung TV, Soundbar and Google chromecast remotes
P
Printables
Modifications for "Remote compatible with Lego Duplo Train using ESP32"
Follow instructions of the original post. Changes are described here: It is recommended to use M2 inserts with 3.5mm diameter for mounting the top plate, the button holder and the throttle stick holder. 3.2mm is too lose. I used M2.5…
P
Printables
DC104 remote holder
Wall holder for DC104 ( and other if they fit ) remote. Can be installed using double-sided tape or you can add holes and attach it with screws . Customization: You can find the Fusion 360 .f3d file in Files Printing: No supports are needed
P
Printables
TPU protection for Philips Ambilight TV remote control series 6 and 7
TPU protection for Philips Ambilight TV remote control series 6 and 7
P
Printables
LG MR22 GN remote control wheel shaft
I designed this part as a replacement for the broken wheel shaft of my LG MR22 GN remote control. I printed both vertically and horizontally. The horizontal position seems to be more stable. Tried it in PLA and it seems to be strong enough.
P
Printables
Remote Holder
Keep your remotes organized and your space clutter-free with this elegant remote holder (holds up to 5).
P
Printables
ESP32 supermini ⨯ Came Top-432 remote case
how to build Solder an ESP32 to a Came Top-432 remote. Those remotes use a similar case and should have the same PCB form factor. I tested with a Top-432-EE model. On the remote PCB, solder 3V3 or 5V (depending on if your remote use 2*3V…
P
Printables
RF Gate Remote Case | Genius ECHO TX4 RC 433,92MHz
I lost the original screws for the case and didn't want to carry an exposed PCB, so I designed a 3D printable case. You do need to remove the plastic connector for it to fit (not pictured - removed & binned) (or you can modify the CAD…
P
Printables
Etoe Seal Pro Remote Control Holder
E N G L I S H This bracket is glued to the video projector. I use the thick Nano double-sided adhesive tape from the Action market. You can choose the position freely, but the remote control does not take up any space in the bag next to…
P
Printables
Remote control mount for LG Magic Remote
Remote control mount for a LG Magic Remote as well as an additional remote or phone. I have a Linn preamp with a very tall remote so I designed the mount to hold horizontally. You can also hold a smartphone. Printed with Elegoo PLA+ @…
P
Printables
dji remote phone mount adapter
i printed it at 8% infill out of pla. put a little hot glue on phone seat for grip. will hold a phone up to 12mm thick and 200mm wide. new v2 model with rounded echis for easier printing and comfort
P
Printables
LED Lamp Remote Holder
A Wall mount for Remotes i got with a Baltimore LED Lamp from Action and AmazeFan LED Ceiling Light from Amazon. Both fit nice, altough the Baltimore Remote has a little bit more wiggle room.
P
Printables
RCA TV Remote Battery Cover ( RC246 )
About the design This battery cover replaces the original plastic cover. The built-in clip on these covers is prone to breaking, and that is what happened. I designed this cover in Alibre Design Cad software. Printing Instructions Print…
P
Printables
C8 Flashlight XT30 mod for remote switch
This is a mod to attach a DIY detachable remote pressure switch to the C8 flashlight. The printed parts replace part of the stock rear switch assembly. You are also going to need XT30 connectors, and some metal strips (like those they use…
P
Printables
Remote Control Holder
A remote control holder with two slots, one 5cm wide and one 4cm wide. Both are 5cm deep. The holder is 10cm tall. Pictured: Printer: Prusa MK2.5S Layer height: 0.25mm Infill: 15% Lightning Filament: eSUN PLA+ Gold
P
Printables
Duka Remote Holder
A neat holder, for the small Duka One S & One Pro series ventilation remote control. As a builder, I have occasionally mounted a ventilation product from Duka. But the remote control that’s included is small and easy to misplace, so I…
P
Printables
IKEA SOMRIG / RODRET Remote Adapter for UK Light Switch
This is a custom-designed adapter that allows you to mount an IKEA SOMRIG or RODRET remote control neatly over a standard UK light switch. It clips securely in place using small, strategically placed clips—no embedded magnets, adhesives,…
P
Printables
Samsung Odyssey G6 remote holder
Holder for Samsung Odyssey G6 remote with support on sides
P
Printables
DKS remote jacket with sunscreen clip
sleeve to enclose the DKS remote and a simple clip to clip it to a sunscreen or other convenient location. solidworks file included for future improvement. print with PC or ABS because the inside of a car gets real hot. pla gonna melt.
P
Printables
Remote Control Hovercraft
I used 2 40a 4s escs with 2 5 inch fpv drone motors for power, along with a small servo for steering and a pwm reciever. The skirt is made from a trash bag and attached with duct tape, and it needs weight on the back to balance out the…
P
Printables
ComfortZone Fan Remote Holder
Simple Remote Holder for the ComfortZone Fan. Holder pocket is 41x20mm, pocket depth of 35mm, with a 4mm screw hole.
P
Printables
Sun Visor Clip for a Steel Line Garage Remote Holder
Remixed the original clip as I didn't want to have to attach anything to the remote and as I still had the original Steel Line Garage remote holder I made modification to make the clip narrow and able to slide into the remote holder.
P
Printables
Biobidet Remote Holder
I modeled this after my own remote control after losing the original holder. The fit is snug but workable. This should fit this remote: https://biobidet.com/products/wireless-remote-replacement?variant=1556313964564 I printed this…
P
Printables
Skyworth Portable TV Remote Control Holder
We recently purchased a Skyworth 24-Inch Portable Smart Screen TV ( https://www.amazon.com/dp/B0D3VJDQFX?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 ), and I wanted a place to store the remote control. I whipped this up in Fusion, and it works…
P
Printables
Cheap 433MHz Dash Button Style Single Remote Button
This a cheaper implementation of a single button module, similar to the Amazon Dash button, which were a convenient thing in the past, dedicated to a single product, and with the press of a button, you can order an item. Amazon stopped…
P
Printables
Unfolded Circle Remote 3 wireless charging stand
A wireless charging dock for the Unfolded Circle Remote 3 that can accept MagSafe (56mm) or third party (58mm) wireless chargers. The base and cover are universal; just pick which cradle charger size you need and print accordingly. I have…
P
Printables
Protective cover Samsung remote - TPU
My son and wife keep dropping the remote on the hardwood floor… So i remixed a model here on printables to make it a protective cover for our remote. I used a bit of double sided tape for the cover to make sure it doesn't come loose. I…
P
Printables
Bionaire Fan Remote Holder Wall Mount Holmes
Remote Control Holder for Bionaire Stand Fan BSF1616DG and some Holmes fans, wall mountable using #6 screw or two poster size command strips. No supports needed, print on end as pictured.
P
Printables
Carrier split mini/ac remote holder for desk clamp
Carrier ac/split mini remote that works with modular desk clamp
P
Printables
3rd Gen Apple TV Ergonomic Remote Case
Ergonomic case for the 3rd Gen Apple TV remote. Includes ridges along the edges for better grip. Finger positioning indent along the back for hand placement. Raised edge around the Siri/Search button to stop accidental presses. Charging…
P
Printables
Wanbo remote bracket
Just needed a way of mounting my Wanbo remote, so I designed this little thing. Fits 22mm board perfectly and the remote slides right in.
P
Printables
WiZMote Remote Control Holder WiZ Connected Wall Desk Mount Holder
Remote Control Holder for WiZMote, WiZ remote control, wall mountable using two screws 40mm apart, two poster size command strips or magnets (either two or four 3mm x 10mm). Two desk versions also, 30 degree or 60 degree angle. Wall mount…
P
Printables
Elro Outlet Remote Holder
A simple holder for Elro outlet remotes or similar sized remotes.A simple holder for Elro outlet remotes or similar sized remotes. The hollow space is 35 mm x 16 mm. I created one version to be used with double sided tape and on with…
P
Printables
Apple tv remote holder with MakerBeam
Apple tv remote holder with MakerBeam added on the back.
P
Printables
Remotes Stand (3 thick, 3 thin)
Stand for TV remotes. It has six slots; three thicker, three thinner. Print with PLA or PETG, no supports needed.
P
Printables
Peugeot 307 remote buttons
Spare buttons for the key fob for Peugeot 307. Depending of the internals of the remote may require some grinding or other tweaks
P
Printables
Fan Remote Decora Over-switch Remix
I loved the remix by AlwaysTinkering but it was just a smidge too close to the wall plate and wouldn't allow my switch to stay on. I just added 1mm to the mounting points to give that clearance. While I was at it, I shrunk the whole thing…
P
Printables
Sony TV Remote Holder RM-YD103 Wall Mount Holder
Sony TV Remote Holder RM-YD103 wall mountable using screws or poster size command strips. Holes 40mm spacing. No supports needed, print on end as pictured.
P
Printables
ownMade - Tv Remote Control Holders
For a request @work i made this Tv Remote Control Holders Tv Remote Control Holders Cap - 9.5 x 9.5 x 3 mm Cap - 9.5 x 9.5 x 6 mm TvRemoteControlHolder - 61 x 51 x 115 mm TvRemoteControlHolderflat - 61 x 51 x 100 mm
P
Printables
Car holder for Hörmann HS series remote control (35x15 mm)
This is a simple car holder for the Hörmann HS series remote control. It is held in place with double-sided tape. The overall shape was inspired both by the original Hörmann wall holder and the design by H3dSprint . However, the holder…
P
Printables
TV Remote Box
Have you ever lost your TV remote. Wasting precious time looking for it. Well that is no more. Print this out a you can put in a special place so you won't ever lose your TV remote.
P
Printables
Weighted Samsung Remote (BN59) - Double & Single Holder
Trays for either (1) or (2) Samsung Remotes. The lower tray that holds (1) remote is designed to have a cavity for adding weight; rocks, sand, nuts/bolts, etc. Then you can glue it shut. My remote models are BN59-01480A (black) and…
P
Printables
Battery cover for Philips remote TV controller
Battery cover for Philips remote TV controller
P
Printables
HY300 remote control holder
HY300 projector remote control holder, fits 18mm furniture board. In my case, I also used adhesive tape for mounting.
P
Printables
Cheap LED remote holder
It should work with any controls less than 40.5mm wide and less than 9mm thick.
P
Printables
Remote Sensor for Zigbee Leak sensor
The inside of my dish washer acts as a faraday cage, so if I put the Zigbee leak senor inside of it, it will not connect to my hub anymore, also the alarm is muted. To help it I designed this simple remote senor head that goes inside the…
P
Printables
Google TV Remote Stand
Features Weighted stand (add metal weights) Non-slip base (add furniture pad) Part Links Weights 3/8" / 9.5 mm Steel - https://www.amazon.com/gp/product/B08FHV3GFN/ref=ppx_yo_dt_b_asin_title_o00_s01?ie=UTF8&psc=1 Non-slip furniture pad…
P
Printables
Jung IKEA Tradfri Remote Switch mount
Mount that fits behind Jung wall plate so you don't have to drill a hole in the wall. Fits the original IKEA Tradfri remote switch.
P
Printables
Roku Remote Wall Plate Holder
I wanted to be able to keep my TCL Roku TV remote by my backdoor, so I designed a wallplate that could hold the remote. This has mounting holes that fit a standard US electrical wall box. UPDATE - 2026-01-22: I've added yet another…
P
Printables
New Digital Remote Control shell - Guscio telecomando New Digital
Release version 2.9 Made to replace the original broken shell of a DVBT digital terrestrial decoder remote control, using OpenSCAD and AI, and completely re-engineered. To join the two parts of the shell, it uses round magnets with a…
P
Printables
Minimalistic Remote Control Holder for 3 Remotes
This minimalist remote control holder is designed to keep your living room tidy while blending seamlessly into modern interiors. The angled front makes it easy to grab your remotes, while the internal dividers keep everything organized…
P
Printables
BenQ Projector Remote Battery Cover Replacement
Replacement battery cover for BenQ projector remotes. Compartment dimensions: Opening: 75mm x 35mm Fits 2x AA batteries Mechanism: Slide-in tabs on one end, cantilever snap catch on the other. Print orientation: Right side up (top face…
P
Printables
Bwarm heated mattress pad remote holder
Made a remote holder for the Bwarm heated mattress pad found at the link. I am using a 3m strip or two to adhere to the wall. https://a.co/d/cbkiuXv
P
Printables
4 Channel 433Mhz RF Transmitter Remote Holder
This is a remote model for a 4 channel RF remote.
P
Printables
Virgin Tivo Box Remote Holder
Remote holder for non-light up virgin remote. I did have one for the light up bigger version. but I can't seem to find it. If you'd like me to upload it. I can have another look.
P
Printables
FoxPro TX1000 Remote Mount / Holder – 3D Printable (STL / 3MF)
Take your predator calling setup to the next level with this custom 3D-printed FoxPro TX1000 remote mount , designed for hunters who demand a secure fit, fast access, and field-ready durability . Unlike generic holders, this mount was…
P
Printables
Decora-style switch built from IKEA BILRESA two-button remote
The IKEA BILRESA two-button remotes are a very inexpensive way to add a programmable wireless switch to a smart home setup, including HomeKit. They are a fraction of the cost of, say, a Lutron Caseta Pico Remote, and easier to integrate…
P
Printables
Samsung OLED TV remote control holder
Samsung OLED TV Remote Control Holder The remote control is lightweight, so good quality double-sided tape is all you need to mount it. I recommend using variable layer heights for printing to create nice curves.
P
Printables
K1C Unibody Riser Timelapse Remote Holder & Trigger
No rooted firmware for K1C 2025 at time of writing. No custom webcam, no Octolapse. 😡 This is a set of simple Bluetooth remote holder and "trigger stick". Do timelapse with your smartphone by using the print head to trigger the remote on…
P
Printables
fire stick remote holder
amazon fire stick remote holder you can use nails screws thumb tacks and others
P
Printables
Remote Holder for Dometic Air Conditioner in a Camper/RV
This design was made to hold the Dometic air conditioner remote used in a SuperTramp camper. One design can be mounted using tape and the other can be mounted using small screws. Both designs are contained in the FreeCAD file and can be…
P
Printables
DieseRC Wireless Remote Holder
This design was made to hold a DieseRC Wireless Remote (model KT16). It can be mounted using either strong double-faced tape or screws. PETG was used for the print and no supports are required. The FreeCAD model is parametric and can be…
P
Printables
Toshiba FireTV remote holder
I designed a basic remote holder for my 1x4 headboard. Print file for SOVOL SV06 ACE
P
Printables
Klipsch Remote Wall Mount
A simple, low-profile wall mount for Klipsch remote controls. Perfect for keeping your remote accessible and organized. 4mm countersunk holes for plaster screws. Print Instructions Material: Printed in ASA-CF . Layer Height: 0.2 mm.…
P
Printables
Bed side remote holder
i designed it to hold a remote 55mm wide and 20mm thick , the holder has a depth of about 60mm
P
Printables
Battery lid for Himoto MT-203 remote control
The battery lid of my himoto controller broke so I made a new one. Finally I printed it with PETG with 100 % infill (propably not necessary). I put the outside on top to get a clean surface and used supports on the plate.